Use the common infrastructure we have, rather than open-coding again.
In changing to the common weston_curtain infrastructure which was
introduced in a previous commit, there are two small functional
derivations.
After adding the view to a layer, we explicitly call
weston_view_geometry_dirty(). This is believed to have no functional
impact, as weston_views have their geometry-dirty flag set when they are
created.
weston_surface_damage() is also called to ensure that the surface is
scheduled for a repaint. As there is currently no good common mechanic
in the common code to ensure that output repaint will occur, due to the
damage propagating outwards from the weston_surface, we are forced to
call this to predictably ensure that the output will be repainted after
we have made this change to the scene graph which should result in the
user observing the new content being repainted.
It is possible that these changes are not strictly required in order for
the correct behaviour to occur. However, it is felt that explicitly
adding these calls is perhaps the least fragile way to ensure that the
behaviour continues to be correct and breakage is not observed,
especially with both view mapping and surface damage identified as areas
for future work which could be beneficial to Weston. If it is felt that
these calls can be removed, then this is certainly possible at a later
stage.
Lastly, there are many users within desktop-shell of the common pattern
of creating a weston_curtain and inserting it into the scene graph to be
painted. These users have been an area of both theoretical concern and
real-life observed fragility and breakage recently. By making each user
follow a common and predictable pattern of usage, each user is no longer
its own special case. This should make it easier to make the
desktop-shell codebase more robust, not only simplifying the codebase,
but improving observed behaviour.
In doing this, it is hoped that future structural and interface changes
become easier to make, allowing us to improve some of the more difficult
corners of the libweston API.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This will allow us to create a solid weston_buffer as well, since we
need to store that separately.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Just as we do for fullscreen backgrounds, reuse the curtain infrastructure
for focus animations.
This introduces a small functional change, in that the surface's output
is no longer directly assigned. Instead, we call
weston_view_set_output() ourselves. As setting the weston_view's
position (done from the common helper function of weston_curtain_create
which has been introduced in previous commits) will call
weston_view_set_position(), the view's geometry will be dirtied as a
result.
When the geometry of a weston_view is dirty, it is marked to be updated,
which will occur whilst traversing the view list during output repaint.
This occurs for every view which is currently assigned to a layer; when
building the view list, any view reachable through the view list whose
geometry is dirty will have its position recalculated and an output
assigned. Doing so results in the surface's current output being
updated.
It is believed that there is no functional impact from the
weston_surface not having a primary output assigned between creation and
output repaint being called.
Signed-off-by: Daniel Stone <daniels@collabora.com>
desktop-shell's focus surfaces want to reuse this, but they don't want
to capture the input, instead allowing it to fall through.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rationalise it a little bit so we don't need pre-declarations of static
functions, and the order of creation more closely matches the others,
including making the same calls to explicitly set the output.
Doing this makes the behaviour match the other users of the same code
pattern. In making them the same, we make desktop-shell code a little
less magically divergent where people might wonder what the correct
pattern is to use. After we have moved all users to a uniform pattern,
later commits are then able to migrate these users to common helper
code, which reduces code duplication, improves code clarity as it is no
longer necessary to wonder about the exact semantics of every
special-case user of this common pattern, and makes it easier to make
interface changes which improve and clarify the patterns which are
prevalent throughout the desktop-shell code.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Dirtying the geometry only sets a flag on the view saying that the
geometry is dirty, so we don't need to do it twice back-to-back.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Opaque regions are in surface co-ordinate space, not global co-ordinate
space, so the region should be anchored to (0,0).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Not all solid-colour views want to be opaque: sometimes we use them with
non-opaque alpha values in order to shade views underneath them.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Given that we have a struct for argument params, we might as well use it
rather than have them split between the struct and native params. For
consistency between the implementations, this also includes a shift from
float to int positioning for the base offset within the compositor's
global co-ordinate space.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The name implied that it was a surface in and of itself, rather than
parameters used by a helper to create a surface and view.
Rename it now that we have weston_curtain as a name, and clean up
initialisers.
Signed-off-by: Daniel Stone <daniels@collabora.com>
create_solid_color_surface actually returns a weston_view that it
creates internally. Since weston_solid_color_view is long and dull,
rename it to weston_curtain.
Signed-off-by: Daniel Stone <daniels@collabora.com>
desktop_shell_removed() won't get called when we shut down, so
explicitly destroy the fullscreen black view.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We could overflow a local buffer if there were more than ten million
concurrently active displays within the current user's session. This
seems vanishingly unlikely, and harmless, but does at least squash a
compiler warning emitted by gcc 12+.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fbdev backend was deprecated in the Weston 10.0.0 release with
6338dbd581. Before that, I suggested
already in 2019 to remove it, but it was too soon then. Now it seems the
final voices asking for fbdev to be kept have been satisfied, see the
linked issue.
Fbdev-backend uses a kernel graphics UAPI (fbdev) which is sub-par for a
Wayland compositor: you cannot do GPU accelerated graphics in any
reasonable way, no hotplug support, multi-output support is tedious, and
so on. Most importantly, Linux has deprecated fbdev a long time ago due
to the UAPI fitting modern systems and use cases very poorly, but cannot
get rid of it if any users remain. Let's do here what we can to reduce
fbdev usage.
I am doing color management related additions to libweston which require
adding checks to every backend. One backend less is less churn to write
and review.
Libweston major version has already been bumped to 11, so the next
release will be Weston 11, without fbdev. enum weston_compositor_backend
entries change their numerical values.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/581
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Tablet shell was removed in 873b515aee in
2013. Time to remove the hopefully last reference to it.
We also gained kiosk shell in the mean time, so mention that instead.
Yes, it's a bit of a lie, because we also have ivi-shell and
fullscreen-shell, but I heard they might be on their way out, so I
didn't add them here.
Would be nice to add kiosk-shell in the SHELLS section too, but in this
patch I am only concerned about dropping the tablet shell reference.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Looks like at least from 2016 onwards the gbm-format option has also
been recognized in an output section.
Time to document that.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since 62a9436417 the gbm-format option has
recognized all pixel formats listed in libweston/pixel-formats.c.
Clarify what pixel formats can be used.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This option is used only with the DRM-backend. Options in weston.ini(5)
should be either generic or for backends that do not have their own man
page yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This option is used only with the DRM-backend. Options in weston.ini(5)
should be either generic or for backends that do not have their own man
page yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We have a string helper which wraps asprintf(). Uses that one because it
clears out the destination string, but also it won't return the number
of bytes unlinke asprintf().
Fixes warnings like:
warning: ignoring return value of ‘asprintf’ declared with attribute
‘warn_unused_result’.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
weston_config_section_get_double() was not covered with tests before.
This patch follows the testing style already present in the file.
Cannot use ZUC_ASSERT_EQ() here, because that would convert the values
to integers before comparison. Luckily, simple strict equality
comparison works here, because we are testing conversion to float, not
the results of lossy calculations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This was the only file in Weston using WL_EXPORT on its own line. Fix
the style to follow everything else.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Using `pixel_format_get_info()` can result in formats being
reported as `UNKNOWN` when used on compositors other than Weston.
As `weston-simple-dmabuf-feedback` somewhat succeeds `wayland-info`
as tool for `zwp_linux_dmabuf_v1` debugging from version 4 on, copy
the approach from the later for these cases.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
These are supported by some other compositors already.
Add them to the list so `weston-simple-dmabuf-feedback`
reports them correctly.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
The built-in backend of libseat requires users to enable a logging
level in order for libseat to start writing out log messages. For that
to happen we split out the info and error log level messages into the
compositor's log scope, while debug level messages go into a dedicated
scope.
With that, this patch brings in a new scope, called libseat-debug, which
users need to explicity create a subscription for it as to retrieve/have
access to debug message coming out of libseat. Note that by default we
have a subscription for the log-scope so any errors/info from libseat
would be displayed to the user.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Everywhere else where use this trick, we also have 'used' in the
attributes, except here. Make this consistent.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/517
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Otherwise, the client will assume that dragging is in progress and remains in
that state forever.
This can happen when weston processes the mouse up event just before the
start_drag() arrives.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
When using the libseat launcher, there is one more detail to take care:
stop libseat from managing the VT.
A normal user does not have permissions to manage a VT, so launching
would just fail. In this use case you also do not want to be managing
the VT, because your normal desktop is already owning the seat
associated with the VT.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Give a little more details about how running Weston via ssh or serial
terminal is best done, now that launcher-direct and weston-launch are
gone.
Hopefully the removal of launcher-direct also makes less people run
Weston as root, when seatd is the privileged process. Running 'weston'
as root might still work through libseat's builtin backend without
seatd.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that launcher-direct and weston-launch are gone, libseat takes their
place.
Enable libseat support by default to give users a hint in case they miss
either of those.
People who used to get launcher-logind when libseat support was disabled
will now be using logind through libseat. This should not cause any
regressions, and if it does, we want to hear about them, because the
separate logind-launcher is also planned to be deprecated in the future.
Disabling logind-launcher by default is left for when it actually gets
deprecated.
In case someone does not have libseat available but do have logind
running, they can just disable libseat support.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This doesn't work with any of the launchers we've kept. Remove the option
and all the bits that handle it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Moving forward we're going to be supporting libseat and logind as our
only launchers. We're doing this to reduce our maintenance burden,
and security impact.
Libseat supports all our existing use cases, and seatd can replace
weston-launch so we no longer have to carry a setuid-root program.
This patch removes weston-launch, and launcher-direct, leaving only
libseat and logind.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Fix a typo. No CM functional change, just redirect LCMS error
into created cmsContext which output into weston log.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
This is probably the simplest case to demonstrate how to use
WESTON_EXPORT_FOR_TESTS.
Previously, vertex-clip test re-built vertex-clipping.c for itself. Now
it directly links in gl-renderer.so instead as that is where
vexter-clipping.c gets built into for actual use. This probably will not
work for any installed program, but luckily tests are never installed,
so Meson makes sure the DSO is found.
Unfortunately we cannot remove the definition of dep_vertex_clipping
yet, because clients/cliptest.c needs it.
This makes vertex-clip test depend on GL-renderer, but that is where the
code is really used.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is a new function exporting macro that intends to make writing unit
tests in the Weston test suite easier.
A test needs to access a private function to be able to verify its
behavior. Previously we have used things like putting such functions in
a separate .c file and then building that file into the corresponding
test. That is a bit awkward and can lead to proliferation of arbitrary
.c files for no good reason. It may also require pre-processor magic,
and sometimes copying chunks of code causing a risk of deviating the
code being tested from the code actually used.
This patch proposes another approach: a private export from a DSO.
Except, private exports do not really exist, and this is just a normal
export with a specific C macro, and omitting the function from public
headers.
Once exported, a test program can link the DSO during build, be that a
shared library or even a plugin, use the private header declaring the
function, and simply call the function in the test.
The declaration of WESTON_EXPORT_FOR_TESTS is in shared/helpers.h so
that it is available to all components equally while still not being in
a public header. Other places that were considered:
- include/libweston/libweston.h is a public header, but external users
should not know about the macro.
- libweston/libweston-private.h is too private and not available to all
components, particularly color-lcms plugin.
- libweston/backend.h is not appropriate for color-lcms plugin either.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Although weston_compositor_run_key_binding() is called when the current
keyboard grab is default_grab or input_method_grab, swallowing the key
event is processed only on default_grab. As a result key events that
should be swallowed are sent to the input method unexpectedly.
For example, when a user press `Super + s` on weston-editor to take a
screen shot, `s` will be unexpectedly entered to the text area.
I confirmed such behaviour with weston-simple-im and fcitx5-5.0.10.
It doesn't occur with weston-keyboard because it doesn't install
keyboard grab.
Signed-off-by: Takuro Ashie <ashie@clear-code.com>
Iterate over rgb[] array instead of repeating the code for .r, .g and
.b.
Also in process_pipeline_comparison() f_max_err variable is dropped
since it was not used much.
This should make the code easier to read.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Individual struct fields are inconvenient to index into, yet most
operations on a color just repeat the same for each of RGB channel.
Being able to index into RGB avoids repeating the same code for each
channel.
Alpha channel is left as separate, since it is almost never handled the
same as RGB.
The union keeps the old .r, .g and .b addressing working. The static
asserts ensure the aliasing is correct.
For demonstration, two simple functions in color_util.c are converted.
Unfortunately initializers need to be corrected everywhere. Field .a is
not explicitly initialized because it is unused in these cases.
This change should make code easier to read.
This change requires gnu99 or c11 standard. gnu99 is already the default
in top-level meson.build.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Given that the test-helper code relies on the screenshooter protocol,
make sure it's available for us to build, and the dependency ensures we
build in order.
Fixes: #588
Signed-off-by: Daniel Stone <daniels@collabora.com>
In certain situations these clients crash a lot due to the low
buffer limit. Four buffers is also what EGL allows without blocking
and what is arguably the upper limit of what a compositor should
demand.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
1. Use fixture_setup to set the generated by LCMS output profile based on
given chromaticities and white points. The following list of well known
chromaticities:
- sRGB
- adobe RGB
- bt2020
and white point is D65. Use INTENT_ABSOLUTE_COLORIMETRIC to avoid BPC.
Input profile is always sRGB and it is used internally by Weston as
stock profile.
2. Use these hardcoded matrixes as part of pipeline 1DLUT->3x3->1DLUT.
The diagnostic code to retrieve the transform matrix is availble into
test in the comments. The conversion matrixes generated for the
following cases:
- sRGB to sRGB (unity)
- sRGB to adobeRGB
- sRGB to BT2020
3. Compare GPU shaders(gl texture3D) vs manual pipeline calculation
Use different max tolerable error per transform.
There are comments how number of points in 3DLUT is related to tolerance.
Tolerance depends more on the 1D LUT used for the inv EOTF than
the tested 3D LUT size: 9x9x9, 17x17x17, 33x33x33, 127x127x127.
4. Enable build matrix-shaper test if color-management-lcms is enabled.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Daniel Stone
nerdopolis
Pekka Paalanen
Marius Vlad
Robert Mader
Derek Foreman
Michael Olbrich
Vitaly Prosyak
James Le Cuirot
Takuro Ashie