Track the current DPMS level for any given output, and track failure (or
otherwise) of the DPMS-setting property call.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Makes create_output_for_connector() slightly easier to read.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Refactor the code constructing the connector name into a new function.
This makes create_output_for_connector() slightly easier to read.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Refactor the code for choosing the initial mode for an output from
create_output_for_connector() to drm_output_choose_initial_mode().
This makes create_output_for_connector() slightly easier to read.
v2: Document everything.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
If a stopped repaint loop gets restarted due to posting of new
damage, and this restart of the repaint loop happens late in the
video refresh cycle, ie. already inside the repaint-window and
thereby after the composition deadline for the current frame,
then defer the actual output repaint to the composition deadline
of the next video refresh cycle by setting the repaint timer
accordingly.
This tries to make sure that:
a) Client(s) posting damage timely before the composition deadline
(video refresh duration - "repaint-window" duration) of the
current refresh cycle will trigger a repaint within the current
refresh cycle, thereby avoiding one extra frame of compositor
lag due to the needed restart of the repaint loop if the loop
was stopped. This allows them to benefit from the earlier
"instant repaint restart" commit to keep latency low.
b) Late clients which post damage close to the end of a refresh
cycle can't race other clients if the repaint loop is restarted.
Instead they will get deferred to the next compositor cycle,
just as if the repaint loop would have been already running -
the semantic of the "repaint-window" parameter is preserved.
This is especially important to prevent a very late client
from triggering a repaint very close to the vblank, which
would cause the compositor to certainly miss the vblank and
skip one frame and then cause a delay of another frame for
other clients which posted their damage in time for the
following frame. Iow. this provides clients with a more
predictable compositor timing and makes it easier for them
to latch onto the compositors repaint cycle.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
drm_output_start_repaint_loop() incurred a delay of
one refresh cycle by using a no-op page-flip to get
an accurate vblank timestamp as reference. This causes
unwanted lag whenever Weston exited its repaint loop, e.g.,
whenever an application wants to repaint with less than
full video refresh rate but still minimum lag.
Try to use the drmWaitVblank ioctl to get a proper
timestamp instantaneously without lag. If that does
not work, fall back to the old method of idle page-flip.
This optimization will work on any drm/kms driver
which supports high precision vblank timestamping.
As of Linux 4.0 these would be intel, radeon and
nouveau on all their supported gpu's.
On kms drivers without instant high precision timestamping
support, the kernel is supposed to return a timestamp
of zero when calling drmWaitVblank() to query the current
vblank count and time iff vblank irqs are currently
disabled, because the only way to get a valid timestamp
on such kms drivers is to enable vblank interrupts and
then wait a bit for the next vblank irq to take a new valid
timestamp. The caller is supposed to poll until at next
vblank irq it gets a valid non-zero timestamp if it needs
a timestamp.
This zero-timestamp signalling works up to Linux 3.17, but
got broken due to a regression in Linux 3.18 and later. On
Linux 3.18+ with kms drivers that don't have high precision
timestamping, the kernel erroneously returns a stale timestamp
from an earlier vblank, ie. the vblank count and timestamp are
mismatched. A patch is under way to fix this, but to deal with
broken kernels, we also check non-zero timestamps if they are
more than one refresh duration in the past, as this indicates
a stale/invalid timestamp, so we need to take the page-flip
fallback for restarting the repaint loop.
v2: Implement review suggestions by Pekka Paalanen, especially
extend the commit message to describe when and why the
instant restart won't work due to missing Linux kernel
functionality or a Linux kernel regression.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
v3: Fix timespec_to_nsec() which was computing picoseconds,
use the new timespec-util.h helpers.
v4: Rebased to master, split long lines.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A helper to improbe readability.
Cc: Daniel Stone <daniels@collabora.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A new optional parameter "-d msecs" allows to specify a
delay before the surface attach/damage/commit to shift
the point in time when a surface update is committed.
This allows to test how different client timings interact
with the compositors repaint timing.
Suggested by Pekka Paalanen.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: Clarify the intent, doing a delay in window_create_feedback()
is a bit surprising. Use nanosleep() instead of clock_nanosleep(),
which may not support the chosen presentation clock.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
What is libweston and where do we intend to go with it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Jon A. Cruz <jonc@osg.samsung.com>
Transform matrix for transforming a surface to global_matrix is
calculated from
* ivi_layout_surface_properties
* ivi_layout_layer_properties
This patch pareares sub-method like following,
1/ calc_surface_to_global_matrix()
calc_transformation_matrix() is called twice with
ivi_layout_surface/layer_properties respectively.
2/ calc_transformation_matrix()
This calcurates matrix from orientation, source rectangle and
destination rectangle.
2-1/ To calculate rotation, fit centor of source rectangle to (0,0)
temporarily. This is moved back in 2-4.
2-2/ Apply rotation variant
2-3/ Apply scale variant
2-4/ Apply positioning variant, taking account into 2-1 temporary
positioning.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
To refactor transform of ivi_layout_surface and ivi_layout_surface to be
more readable logical flow.
Remove following parts once,
* definition of weston_transform in ivi_layout_surface
* update_layer_orientation
* update_layer_position
* update_surface_position
* update_surface_orientation
* update_scale
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There is no logic update.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This reverts commit d3553c721c.
weston_wm_write_property() takes the ownership of the reply it gets as
a parameter, and will eventually free it later in writable_callback.
This change introduced a double-free when Xwayland programs triggered a
copy to the clipboard, leading to a Weston crash.
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Documentation for the prepare_lock_surface event description is
incorrect. The summary says "Tell the client..." however the full-text
description says "tell the shell..."
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[This time include the actual changes.]
Documentation for the prepare_lock_surface event description is
incorrect. The summary says "Tell the client..." however the full-text
description says "tell the shell..."
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The wl_list_for_each operation on the free_buffers list should use
free_link not link, which is a different list.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
When an output is being destroyed reassign the output of the views
that were in it, to be sure not to keep a dangling pointer which could
be used later on by calling weston_surface_assign_output() on the
view's surface.
Also make sure we send wl_surface.leave events to the surfaces that
were in that output.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The wl_list_for_each operation on the free_buffers list should use
free_link not link, which is a different list.
This fixes a crash when entering fullscreen mode when using the pixman
renderer on the wayland back-end.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
dump_property allows reply to be NULL. Calling it unconditionally will
ensure user knows where the selection failed.
Also refactor code a bit.
Suggested by Marek Chalupa
The man pages indicate this routine can return NULL on certain error
conditions.
Suggested by Marek Chalupa
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Make it a bool in both surface_move() and struct weston_move_grab
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This commits starts to separate the libweston code from the weston
specific code. As such, the main() is moved, together with signals
handling and configuration handling.
The definition of DEFAULT_REPAINT_WINDOW is left in compositor.c, so the
config loading of repaint_msec is slightly modified to account that.
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This commit adds three new exported functions:
- weston_compositor_create() returns a new weston_compositor instance,
initializing it as the now removed weston_compositor_init() did.
- weston_compositor_exit(compositor) asks the compositor to tear
down by calling the compositor's exit vfunc which is set by the
libweston application.
- weston_compositor_destroy(compositor) is called by the libweston
application when tearing down the compositor. The compositor is destroyed
and the memory freed.
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It is redundant to check x*alloc's return value for null pointers, since
they are guaranteed to either return non-NULL or terminate the program.
In cases where we memset the malloc'd memory to 0, we can more
efficiently use the xzalloc() routine. zalloc looks for opportunities
to return memory chunks that have already been zero'd out, so it can
provide better performance.
This patch addresses this warning, reported by Denis Denisov:
[clients/window.c:1164] -> [clients/window.c:1166]: (warning) Possible
null pointer dereference: surface - otherwise it is redundant to check
it against null.
[clients/window.c:4513] -> [clients/window.c:4514]: (warning) Possible
null pointer dereference: surface - otherwise it is redundant to check
it against null.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
error(1, ...) already will exit, per man page: "If status has a nonzero
value, then error() calls exit(3) to terminate the program using the
given value as the exit status." So exit(EXIT_FAILURE) is never
reached.
The EXIT_FAILURE macro is guaranteed to be non-zero. Typically it's
just 1, but on some systems (e.g. OpenVMS apparently) exit(1) means
success so EXIT_FAILURE there is defined to some other non-zero value.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
This is a preliminary change for libweston, with no functional modifications.
Separate the backends and the core weston_compositor struct, by creating
the weston_compositor in the main(), and having the various backends extend
the weston_backend struct, an instance of which is returned by the backend
entry point.
This enable us to logically separate the compositor core from the backend,
allowing the core to be extended without messing with the backends.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Added a simple C-based test framework and an example program
that uses it to run through some simple unit tests.
This is new code inspired primarily by the approaches of Google
Test, Boost Test, JUnit and TestNG. Factors of others were also
considered during design and implementation.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix desktop-shell's activate() method to only restore the output
mode on the single output on which a shell surface gets activated.
This way toplevel fullscreen surfaces can mode-switch their output
via method WL_SHELL_SURFACE_FULLSCREEN_METHOD_DRIVER and that
temporary mode properly persists until the surface loses its
fullscreen status, but effects like window switching and exposay
still work in the expected way.
v2: Split into a separate patch from original patch
"Allow restore_output_mode() to work properly.",
as suggested by Derek Foreman.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Allow proper handling of output->pipe > 1 to support
triple-head graphics cards etc. by using the "high-crtc"
support introduced in Linux 2.6.39 and libdrm 2.4.25
around May 2011.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Initialize output->native_mode with the initially chosen
mode for an output, so weston_output_mode_switch_to_native()
has something to work with and can switch back from temporary
selected modes to the outputs native mode. Before, this was a
no-op.
This allows an output to switch back to its default mode if
a former toplevel fullscreen shell surface created via method
WL_SHELL_SURFACE_FULLSCREEN_METHOD_DRIVER gets destroyed, or
it gets demoted to non-fullscreen, or if modesetting on the
output failed for some reason.
v2: Modified and split into a separate patch from original
patch "Allow restore_output_mode() to work properly.",
as suggested by Derek Foreman.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
The matching logic in choose_mode() compared refresh rate
of a drm_mode candidate mode expressed in Hz against the
requested refresh rate of the target weston_mode expressed
in milliHz, so the match always failed and the logic always
ended up the mode with the highest refresh rate for a given
resolution, instead of the one matching the requested rate.
Match proper fields to fix this.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Desktop shell demoted all fullscreen shell surfaces on all active
outputs of a multi-display setup whenever any shell surface was
activated anywhere. This made it impossible to have multiple
fullscreen windows on separate outputs active at the same
time, as creating or activating any shell surface would disable
fullscreen status for all existing fullscreen surfaces.
Make lower_fullscreen_layer() more selective, so on request it
only demotes fullscreen surfaces on a specified weston_output.
The activate() method for a specific surface will now only request
demotion of fullscreen surfaces on the target output of the activated
surface, but leave fullscreen surfaces on unrelated outputs alone.
Desktop wide acting functions like the window switcher or exposay
will still demote all fullscreen surfaces on all outputs to
implement their effect as before.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
We used to rely on the order in which the
weston_compositor::destroy_signal callbacks happened, to not access
freed memory. Don't know when, but this broke at least with ivi-shell,
which caused crashes in random places on compositor shutdown.
Valgrind found the following:
Invalid write of size 8
at 0xC2EDC69: unbind_input_panel (input-panel-ivi.c:340)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea360 is 208 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0D7: wl_list_remove (wayland-util.c:57)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea370 is 224 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0E7: wl_list_remove (wayland-util.c:58)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea368 is 216 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Looking at the first of these, unbind_input_panel() gets called when the
text-backend destroys its helper client which has bound to input_panel
interface. This happens after the shell's destroy_signal callback has
been called, so the shell has already been freed.
The other two errors come from
wl_list_remove(&input_panel_surface->link);
which has gone stale when the shell was destroyed
(shell->input_panel.surfaces list).
Rather than creating even more destroy listeners and hooking them up in
spaghetti, modify text-backend to not hook up to the compositor destroy
signal. Instead, make it the text_backend_init() callers' responsibility
to also call text_backend_destroy() appropriately, before the shell goes
away.
This fixed all the above Valgrind errors, and avoid a crash with
ivi-shell when exiting Weston.
Also using desktop-shell exhibited similar Valgrind errors which are
fixed by this patch, but those didn't happen to cause any crashes AFAIK.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation,
Following features are tested,
- add notification of ivi-layer with bad parameter
- add notification of ivi-surface configure with bad parameter
- add notification of creating ivi-layer with bad parameter
- add notification of creating ivi-surface with bad parameter
- add notification of removing ivi-layer with bad parameter
- add notification of removing ivi-surface with bad parameter
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested,
- add notfication of ivi-surface with bad condition
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested,
- notification of adding ivi-layer
- notification of creating ivi-layer
- notification of removing ivi-layer
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
helper client.
Following features are tested,
- notification of adding ivi-surface
- notification of ivi-surface configure
- notification of creating ivi-surface
- notification of removing ivi-surface
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
The TESTs in ivi_layout-test.c may have several server-side parts
(RUNNER_TEST in ivi_layout-test-plugin.c) each. Sometimes we need to
carry state from one RUNNER_TEST to another within one TEST, but not
across multiple TESTs. The correct lifetime of that state would be the
lifetime (and identity) of the runner_resource, as one TEST creates and
uses at most one weston_test_runner during its lifetime.
However, tests are executed one by one. Take a shortcut, and use a static
global for storing that state. This turns the test_context into a
singleton. To ensure it is not confused between multiple TESTs, add
asserts to verify its identity.
Following patches will add tests for notification callbacks. These will
be using the carried state.
[Pekka: add serialization checks, rename the global, rewrite commit message.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation,
Following features are tested,
- ivi-screen operation with bad parameter
- render order with bad parameter
- destroy ivi-layer in the ivi-screen and call commit_changes
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested,
- ivi-screen id
- ivi-screen resolution
- render order of ivi-layers in ivi-screen
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-layer,
- create with bad parameter
- visibility with bad parameter
- opacity with bad parameter
- destination rectangle with bad parameter
- orientation with bad parameter
- dimension with bad parameter
- position with bad parameter
- source rectangle with bad parameter
- properties with bad parameter
- destroy ivi-layer and call set_visibility_commit_changes
- destroy ivi-layer, call set_opacity, and commit_changes
- destroy ivi-layer, call set_orientation, and commit_changes
- destroy ivi-layer, call set_dimension, and commit_changes
- call set_position, destroy ivi-layer, and commit_changes
- call set_source_rectangle, destroy ivi-layer, and commit_changes
- call set_destination_rectangle, destroy ivi-layer, and commit_changes
- create duplicate
- destroy ivi-layer and call get_layer
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
Daniel Stone
Pekka Paalanen
Mario Kleiner
Nobuhiko Tanibata
Emmanuel Gil Peyrot
Christopher Michael
Bryce Harrington
Giulio Camuffo
Derek Foreman
Jon A. Cruz
Jonas Ådahl