Place the subscribe parts and displaying of available scopes out of
main as it makes no sense to keep them there.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Uses (debug key-binding mod+shift+space) KEY_D to display/dump
the contents of the flight recorder.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Like a black box in an airplane, the flight recorder can be used to
accumulate data and, when needed, to display its contents.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Avoids a potential dependency on the log scope being set-up before
actually creating the scope. Destroy part of the log context could
suffer from the same issue if the log scope is destroyed before.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Logging should start as early as possible so create the log scope as
early as possible, before subscribing to it.
Open the logfile before creating the 'logger' subscriber, making sure
we're logging to the file properly.
Also migrate `weston_log_set_handler()` to avoid potential calls to
`weston_log` before installing the log handler.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Destroying the compositor after destroying the log scope will not print
out the messages in the tear down/clean-up phase of the compositor, so
add a new tear_down function which allows keeping a valid reference to
the compositor. This way we can destroy the compositor before destroying
the scope and keep the debug messages.
While at it remove the log context destroy part from the clean-up
of the compositor and make it stand on its own.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Pass log scopes from the command line to subscribe log scopes
dynamically to the 'logger' subscriber.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
With the logging infrastructure in place this patch add a new user: file
type of stream backed-up by a std file descriptor.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rather than using 'begin_cb' rename it to a more suitable name.
Further more instead of using the scope use the subscription to pass as
an argument. The source scope is attached to the subscription when
creating it so we can access it that way.
This also adds a _complete and a _printf method for the subscription
such that the callbacks can use to write data to only _that_
subscription and to close/complete it, otherwise writing to a scope
results in writing to all subscriptions for that scope which is not
correct.
In the same time, the scope counter-parts of _write and _complete will
now use the subscription function as well.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniels@collabora.com>
This avoids duplicated bits, by calling the scopes's callback (if any)
and adding the subscription to the scope's subscription list. Further
more, the scope's name when creating the subscription is not needed so
removed that as well.
In mirror, also inline removing of subscription for scope's subscription
list. Fix a potential corner case when the user can request a
subscription to an invalid scope in stream_destroy().
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As described in e10c9f89826bb: "weston-debug: Introduce...", the
subscriber object need further functionality to make use of it.
Current form of the weston-debug protocol would not need this, as it
creates underneath a new subscriber each time a client connects and
subscriptions are created/destroyed automatically with the help of
wayland protocol. For other types of streams, we require to manually
create a subscriber and to subscribe to log scopes.
This patch introduces the ability to create subscriptions, and
implicitly to subscribe to (previously created) scopes.
In the event the scope(s) are not created we temporary store the
subscription as a pending one: a subscription for which a scope doesn't
exist at the time of the subscription. When the scope for which the
subscription has been created we take care to create the subscription as
well.
While at it the documentation bits are modified accommodate the subscribe
method and its further functionality.
Lastly, it removes an unlikely case when a scope is not created so we
avoid any kind of dandling (pending) subscription in case there is
subscription to it. We can only do something about in the destroy part
of the scope.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Adds a minimalistic API for managing the subscription object. The
subscribe functionality will be brought in once we re-organize a bit
weston-debug-stream and split it properly. It extends the logging
context with a linked list of potential subscription and adds a linked
list of subscriptions in the log scope.
This patch represents the start of a logging framework for weston. It's
being built around weston-debug, with the intent to superseded it, and
make weston-debug a client of the framework. Further more the logging
framework should replace current logging handler and allow other types
of streams to be used.
Currently present in libweston under weston-debug we have log scopes, debug
streams and a logging context.
With this patch, two (internal) objects are being added: the concept of
a subscriber and the concept of subscription. The subscription object
is a ephemeral object, implicitly managed which is created each time one
would want to a subscribe to a scope. The scope will maintain a list of
subscriptions and will continue to be explicitly managed.
The streams will use the subscriber object as a base class to extend
upon. By doing so it allows to customize the stream with specific
functions that manipulate the underlaying storage. The subscriber object
will require a subscribe function and specific stream functions and like
the scope, will be explicitly managed.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Introduce a new private header file that only internal backends are
allowed to use. Starts by migrating functions that operate on the
'struct weston_head'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Introduce a new private header file that only internal parts of the
library are allowed to use and shouldn't be exposed in the public header
of libweston.
Start by adding by adding functions that operate on the 'weston_buffer*'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
config-parser.h is a helper API that libweston core must never depend on. Using
it is a compositor frontend decision.
Including it in libweston.h would give the wrong message.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
logind will send a device changed at start of day, prompting a session
active change, but the session will already be active from compositor
creation.
Avoid unnecessary signal emition and drm state invalidation.
The logind launcher sets the session active when the graphics device is
assigned to weston from systemd. Unfortunately 8d23ab78 didnt check whether the
session was already active before setting it active and emitting the session
active signal.
The handler for that signal then proceeds to invalidate the entire graphics
state, causing the next redraw to reconfigure all outputs (to the same routing
as they were already).
This then massively increases the likelihood of trying to configure a crtc that
has a commit already in flight.
Add the old behaviour of only emitting a signal on a changed state.
This avoids the issue for now by reducing the chances of a clash. Future
work will need to fix the issue properly (better handling of state_invalid e.g.
wait for quiescence, better monitoring for crtc usage clashes etc).
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
The DCO was fetched from https://developercertificate.org/ on Feb 4, 2019.
DCO-1.1.txt is a verbatim copy of it.
We should carry a copy of this legal document to be explicit on what wording we
refer to. A link to the URL is not enough, because it may go stale or change
contents without notice.
This clarifies on what the S-o-b actually means. The meaning itself is the same
as before.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Depending on system loading, weston-launcher could drop the drm
master access before the compositor and all the clients receive
the notification. In this case, some commit could be sent to the
drm driver too late and get refused with error EACCES.
This error condition is not properly managed and causes weston to
hang.
Change the return type of start_repaint_loop() and repaint_flush()
from void to int, and return 0 on success or -1 if the repaint has
to be cancelled.
In the callers of start_repaint_loop() and repaint_flush() handle
the return value and cancel the repaint when needed.
In backend-drm detect the error EACCES and return -1.
Note: to keep the code cleaner, this change inverts the execution
order between weston_output_schedule_repaint_reset() and
repaint_cancel().
No need to wait for suspend or for any notification; in case the
weston reschedules a repaint, it will get EACCES again.
At resume, damage-all guarantees a complete repaint.
This fix is for atomic modeset only.
Legacy modeset suffers from similar problems, but it is not fixed
by this change. Since drm_pending_state_apply() never returns
error for legacy modeset, this change has no impact on legacy
modeset.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/117
Unfortunately, our y_invert helper also forgot to free the region it
transformed to. Clean up our allocation before we exit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In 55bcb93fef ("gl-renderer: Use helper for conversion to EGL rects"),
we extracted and lovingly commented the transformation from global to
output co-ordinate space used for EGL_KHR_swap_buffer_with_damage, into
a new helper function.
The commenting correctly noted the steps we need to perform the
transformation: shifting by the output's offset into global space,
followed by applying the output's scale and rotation transformations.
Unfortunately, the code did not live up to the high standards of the
comment, and forgot to translate by the output's offset. This meant that
for multiple outputs, we would probably end up with wildly out-of-bounds
co-ordinates.
Fix the code to first translate by the output's offset in global space,
ensuring that both our swap_buffers_with_damage, and our partial_update
co-ordinate sets, can spark joy for those blessed with more than one
output.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Allow a gstreamer pipeline to be configurable via an weston.ini. It is
necessary that source is appsrc, its name is "src", and sink name is
"sink" in pipeline. Also, remoting plugin ignore port and host
configuration if the gst-pipeline is specified.
The GBM and DRM constants have the same meaning. In preparation
to make the DRM backend compile without libgbm, prefer the DRM
constants where GBM is not needed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
This patch adds a client app which can be used to show the
implementation of weston content-protection protocol. The app can
request for Type-0 and Type-1 content or request for disabling
content-protection to the content-protection server.
It listens for the content-protection status change event from the
server and accordingly display the required content.
The content Type-0, Type-1 and unprotected contents are prepared
using cairo surface, with different color and text to distinguish
between the contents.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The content protection protocol requires that in enforced mode, parts of the
surfaces which lie on outputs with protection level lower than that of the surface
be censored. This patch uses a solid shader to color such regions with
dark red.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
This patch enables a user to opt for HDCP per output, by writing into
the output section of weston.ini configuration file. HDCP is always
enabled by default for the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Marius Vlad
Pekka Paalanen
Robert Beckett
Antonio Borneo
Daniel Stone
Tomohito Esaki
Stefan Agner
Ankit Nautiyal
Harish Krupo