strncpy only adds null terminating bytes if the source string is smaller
than the destination string. Since this function relies on the string
being null terminated when checking its contents, we better make sure
there is at least a \0 as the last character.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
We could not paste text when its source went outside the
visible part of the buffer ; this is because we were
incorrectly assuming that our iterator should start at
row 0, while it could very well be negative.
Signed-off-by: Manuel Bachmann <manuel.bachmann@iot.bzh>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
xwayland source is checked, so it dispatches twice on any event.
If the other turn has no events to dispatch, we flush the connection
redundantly
v2. do not flood logs with 'unhandled event' messages
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
xalloc terminates the program abruptly if the requested amount of
memory couldn't be allocated. To insure that the errors are handled
cleanly, use zalloc instead.
Signed-off-by: Seedo Eldho Paul <seedoeldhopaul@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
We need to input_ungrab() on the stored input, not the one that caused
the release - otherwise bad things can happen in multi-seat environments
when a seat that didn't open the menu closes it.
To reproduce:
configure two seats
launch weston terminal
open the right click pop up
select a menu item from the other seat
The next click from the seat that opened the menu will cause a segfault.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
create_layout_transition does not initialize is_transition_func.
This patch initializes it to NULL.
Signed-off-by: John-John Tedro <johnjohn.tedro@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Result of 'calloc' is converted to a pointer of type 'unsigned int', which is
incompatible with sizeof operand type 'int'
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
layout_transition_register could not work and we need to free trans in
the calling function.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Free transition before return. We don't need to use layout_transition_destroy,
because transition was not registered yet.
v2: consolidate memory leaks fixes
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This stops us from rotating or moving pop-up menus by instead rotating
their parents.
This is easiest to see using a multi-seat configuration.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
It's actually possible to get here after the surface has been destroyed,
especially when running client apps under valgrind.
That probably shouldn't be able to segfault the compositor.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
When running with the RPi backend, Weston now segfaults at startup on the
line:
flippipe->clk_id = output->base.compositor->presentation_clock;
in `rpi_flippipe_init()`.
This is because `output->base.compositor` is NULL. This problem did not
exist on 1.8.0, and it looks like it may have been introduced by 954f183e2f.
This commit ensures that the `compositor` is initialised in `rpi_backend`
and that flippipe init uses the compositor pointer from backend.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91885
Signed-off-by: John Sadler <deathofathousandpapercuts@gmail.com>
Changes in v2:
- fix summary to not break the build
- use output->backend->compositor in rpi_flippipe_init() instead of
output->base.compositor. The latter is set by weston_output_init()
which gets called later than rpi_flippipe_init().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: John Sadler <deathofathousandpapercuts@gmail.com>
So it turns out if you cat /dev/urandom and drag select in the mess
you can crash weston-terminal. There may also be more legitimate
ways of doing this.
The reason is that isalpha() and isdigit() only accept values that
fit within an unsigned char or are EOF.
By treating values < 0 the same as values > 127 we prevent this crash.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Really not sure why this was even here - it worked because
we were dividing by 1.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This reverts commit 6858383d51.
The main reason for the original patch was a regression on the Intel
drivers causing compositor framerate to drop to half during cursor
updates or motion. The Intel problem was fixed in
2e7f43c41c
The fix is included in Linux 4.1-rc6 and 4.0.5.
The comment in the original patch is still true, but arguably the
possible minor glitches with cursor updates are less bad than not using
cursor planes at all.
Cc: nerdopolis <bluescreen_avenger@verizon.net>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Giulio Camuffo <giuliocamuffo@gmail.com>
Cc: David FORT <contact@hardening-consulting.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We should be checking our scaled image height against the allocation
height rather than the allocation width.
Fixes vertical image motion when horizontal motion restricted, i.e.
when window is wide and short compared to the image.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When running with the RPi backend, Weston sefaults during shutdown. This is
due to the fact that `compositor->backend` is never initialised, and there
is no NULL check prior to calling `destroy()`.
This commit fixes the issue by making `rpi_backend_create()` intialise
`compositor->backend` - just like the X11 backend does.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91886
Signed-off-by: John Sadler <deathofathousandpapercuts@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This commit works-around a serious issue when running with the RPi backend.
When an EGL client shuts down and destroys it's EGL window, Weston dies with
a segmentation fault in the above function (because `buffer` is now NULL).
The addition of a simple NULL check avoids the problem.
This is a minor re-formatting of the patch already submitted here:
http://patchwork.freedesktop.org/patch/34885
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85167
Signed-off-by: John Sadler <deathofathousandpapercuts@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A layer for workspace is used to display icons for invoking applications
in several pages. These pages are swapped from one to next page. The
width of the layer was decided as a size of screen before reading
weston.ini. This worked correctly because there was no feature of
clipping of layer so the width of layer was not taken account.
Now clipping feature is supported. So the width shall be set to correct
one after reading weston.ini.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
View clip region is set in surface-local coordinates. To compute that
region, the ivi-layer destination rectangle in the global coordinates
are transformed back into the surface-local coordinates.
The transformation is computed by first forming the transformation
matric for the forward mappings, and then inverting it. The inverse
matric is used to transform the destination rectangles to the
surface-local coordinate system. The intersection of the rectangles is
the view clip mask.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Bumping libdrm requirement by 3 years just for output connector name
constants was a bit much. Fix the problem introduced in
89c49b3060 by conditionally using the new
additions.
Both VIRTUAL and DSI came in the same libdrm commit
566c3ce877a4be72697e15cdfc421ce965f7c37d, so we check only for DSI.
This patch also reverts faee330c5e.
Reported-by: Eugen Friedrich <friedrix@gmail.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
commit 89c49b3060 changed the way we name
outputs, but it also added the new output names VIRTUAL and DSI.
These aren't available until libdrm 2.4.59
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
mesa supports EGLSwapInterval 0 now, so lets remove this hack. As a
bonus we don't conflict with the XDG shell protocol that doesn't allow
committing a null-buffer, which was a side effect of this hack.
This patch reverts e9297f8e7e. See that
commit for an explanation how this worked.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
[Pekka: added reference to the original commit]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Clean up display connection via eglTerminate() in case of EGL
initialisation error.
Signed-off-by: Dawid Gajownik <gajownik@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The problem with the old table of names is that it contains duplicates.
It is possible to end up with multiple outputs with the same name. In
that case you cannot write individual configurations for these outputs
in weston.ini, because they are matched by the name.
Change all names to follow the kernel naming scheme set in
drivers/gpu/drm/drm_crtc.c. The snprintf format now follows the kernel
style, too. Use the DRM_MODE_CONNECTOR_* macros rather than implicit
table ordering.
Completely new entries in the table are "Virtual" and "DSI".
There should not be any gaps in the macro values, but if there are, deal
with a NULL entry.
Also change "UNKNOWN" to "UNNAMED" so it's easier to distinguish from
"Unknown" by the kernel.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89361
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Drew DeVault <sir@cmpwn.com>
Checking wl_list_empty() on a link offers no information: if it returns
true, wl_list_remove() is safe to do. If it returns false, you still do
not know if wl_list_remove() is safe; the link could be part of a list,
or the link could be "uninitialized" (e.g. just wl_list_remove()'d).
(From Pekka Paalanen's comment at
http://lists.freedesktop.org/archives/wayland-devel/2015-August/023987.html).
Calling wl_list_init just before wl_list_insert is redundant. Because
the links of the list are not read before it is overwritten by
wl_list_insert.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: line-wrapped commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It is only possible to remove a layer from the order.layer_list of a
screen, when ivi_layout_screen_set_render_order is called with an empty
array. Therefore, list of layers are cumulated if the API is called
many times with different list of layers.
Change how the flags are set:
- Introduce the dirty parameter for triggering the render order change.
- IVI_NOTIFICATION_REMOVE/ADD flags are set only at commit_screen_list.
Checking wl_list_empty() on a link offers no information: if it returns
true, wl_list_remove() is safe to do. If it returns false, you still do
not know if wl_list_remove() is safe; the link could be part of a list,
or the link could be "uninitialized" (e.g. just wl_list_remove()'d).
(From Pekka Paalanen's comment at
http://lists.freedesktop.org/archives/wayland-devel/2015-August/023987.html).
Calling wl_list_init just before wl_list_insert is redundant. Because
the links of the list are not read before it is overwritten by
wl_list_insert.
Use assert to control if the ivilayer->order.surface_list is empty.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: line-wrapped commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It is only possible to remove a surface from the order.surface_list of a
layer, when ivi_layout_layer_set_render_order is called with an empty
array. Therefore, list of surfaces are cumulated if the API is called
many times with different list of surfaces.
Change how the flags are set:
- Introduce the dirty parameter for triggering the render order change.
- IVI_NOTIFICATION_REMOVE/ADD flags are set only at commit_layer_list.
Checking wl_list_empty() on a link offers no information: if it returns
true, wl_list_remove() is safe to do. If it returns false, you still do
not know if wl_list_remove() is safe; the link could be part of a list,
or the link could be "uninitialized" (e.g. just wl_list_remove()'d).
(From Pekka Paalanen's comment at
http://lists.freedesktop.org/archives/wayland-devel/2015-August/023987.html).
Calling wl_list_init just before wl_list_insert is redundant, because
the links of the list are not read before it is overwritten by
wl_list_insert.
Use assert to control if the ivilayer->order.surface_list is empty.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: wrapped the commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Earlier version Reviewed-by: Nobuhiko Tanibata
<NOBUHIKO_TANIBATA@xddp.denso.co.jp>]
The final list of surfaces of set render order shall be applied. So link
of surfaces and list of surfaces in a layer shall be initialized. And
then the order of surfaces shall be restructured.
Use existing clear_surface_pending_list function to clear the list.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
This bug was introduced in 954f183e2f.
The session_notify() data was accidentally cast to fbdev_backend while
it is weston_compositor. This was possibly due to the code before the
mentioned commit casting data directly to fbdev_compositor without going
through the intended type first, which worked only because
weston_compositor was the first member in struct fbdev_compositor.
Fix the casts to be the right way around.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91654
Cc: nerdopolis1@verizon.net
Cc: Giulio Camuffo <giuliocamuffo@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
gl_renderer_output_create expects `window_for_legacy' variable to be of
type EGLNativeWindowType, not EGLNativeDisplayType. This variable is
used later in eglCreateWindowSurface().
Signed-off-by: Dawid Gajownik <gajownik@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When the user does not specify --enable nor
--disable-simple-intel-dmabuf-client, we want to autodetect based on
dependencies. cb512c018e implemented this,
but forgot to actually enable it if the autodetect comes positive.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The buildbots discovered that recent changes break on Ubuntu 15.04's
armhf images:
configure:16137: checking for SIMPLE_DMABUF_CLIENT
configure:16144: $PKG_CONFIG --exists --print-errors "wayland-client libdrm libdrm_intel"
Package libdrm_intel was not found in the pkg-config search path.
...
configure:16194: error: Package requirements (wayland-client libdrm libdrm_intel) were not met:
No package 'libdrm_intel' found
This patch was provided by Daniel Stone. I've not tested it other than
verifying it does not cause build problems on x86_64.
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
The buildbots discovered this issue on Ubuntu 14.04, which carries
libgbm 10.1.3-0ubuntu0.4. The dmabuf changes need gbm 10.2, so it fails
during build like this:
src/compositor-drm.c: In function ‘drm_output_prepare_overlay_view’:
src/compositor-drm.c:984:10: error: variable ‘gbm_dmabuf’ has
initializer but incomplete type
struct gbm_import_fd_data gbm_dmabuf = {
^
etc.
Proposed fix is to conditionalize the gbm fd import feature in
compositor-drm.
This fix was suggested by daniels. I set up a synthetic test
environment to reproduce the issue as found by the buildbots and tweaked
the patch to get it to build both with and without gbm 10.2.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
v2:
- adapted to protocol changes
- added TODO comments
- minor clean-up
- change y-invert from per-plane boolean to per-buffer flag
v3:
- fix a typo: 1 -> i (noticed by Carlos Olmedo Escobar)
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
v2:
- add TODO note about multi-planar import and how we should do it
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
v2 changes:
- only initialize linux_dmabuf if renderer supports it
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
v2 changes:
- only initialize linux_dmabuf if renderer supports it
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Bryce Harrington
Manuel Bachmann
Marek Chalupa
Seedo Eldho Paul
Derek Foreman
John-John Tedro
Lucas Tanure
John Sadler
Pekka Paalanen
Nobuhiko Tanibata
Jonas Ådahl
Dawid Gajownik
Ucan, Emre (ADITG/SW1)
George Kiagiadakis