This function checks if a particular protocol error came in wire.
It's usefull in the cases where we hitherto used FAIL_TEST.
The problem with FAIL_TEST is that *any* assert will pass the test,
but we want only some asserts to pass the test (i. e. we don't
want the test to pass when it, for example, can't connect to display).
FAIL_TESTs are good only for sanity testing.
The expect_protocol_error allows us to turn all FAIL_TESTs to TESTs
as will be introduced in following patches.
v2: fixed white-space error and a mistake in comment
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
Currently, there is a fun flicker when toggling maximization or
fullscreen on a window in mutter or more sophisicated compositors
and WMs.
What happens is that the client want so go maximized, so we
calculate the size that we want the window to resize to (640x480),
and then add on its margins to find the buffer size (+10 = 660x500),
and then send out a configure event for that size. The client
renders to that size, realizes that it's maximized, and then
says "oh hey, my margins are actually 0 now!", and so the compositor
has to send out another configure event.
In order to fix this, make the the configure request correspond to
the window geometry we'd like the window to be at. At the same time,
replace set_margin with set_window_geometry, where we specify a rect
rather than a border around the window.
This new structure is used for both weston_surface.pending and
weston_subsurface.cached.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
Title can decide the geometry of a frame because it may affect the
existence of titlebar, so setting geometry_dirty in frame_set_title for
potential change.
Signed-off-by: Boyan Ding <stu_dby@126.com>
There exist frames which have buttons without title such as a simple
X application piped through xwayland which doesn't specify a title.
We draw the title bar with buttons, but hide it under the window
because geometry thinks a window needs titlebar only if it has title.
This patch change the condition, making it titlebar is needed if a
frame has title or has button(s), which makes more sense.
Signed-off-by: Boyan Ding <stu_dby@126.com>
Commit 9aa8ce69 forgot to set shsurf->fullscreen_output in
fullscreen_binding(), causing segfault when fullscreening using key
bindings. This patch fixes that.
https://bugs.freedesktop.org/show_bug.cgi?id=79828
Signed-off-by: Boyan Ding <stu_dby@126.com>
I've updated this based on comments, simplifying the command handling.
Currently the screen-share module uses a hard-coded command to start the
fullscreen shell server. This patch causes the module to read the command from
the weston config file (from the "command" key in the "screen-share" section).
The default value remains the same (i.e. to run weston with the RDP backend and
fullscreen shell), but is now located in the weston config file.
As well as allowing the arguments to the fullscreen shell server to be changed,
this also permits an alternative fullscreen shell server to be used if required,
without needing to recompile. Since the command is run as the user running
weston, this should not pose any additional security risk.
Signed-off-by: Andrew Wedgbury <andrew.wedgbury@realvnc.com>
Previoiusly, we had a mess of logic that was repeated with one of the
repeats negated. Not only was this unnecisaraly confusing, but it
segfaulted and one of the negations was wrong. This cleans the whole mess
up and should fix bug #79725.
No functional changes, just adjusting for API changes in libinput:
- libinput_destroy() replaced by libinput_unref()
- log functions now take a libinput context, userdata is gone
- udev seat creation is now libinput_udev_create_context() and
libinput_udev_assign_seat()
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It turns out that flipped-270 is the second-simplest transformation besides
normal because it is a direct swapping of the x and y axes. Having that as
the default encourages people to use flipped-270 as the default test for "I
want to try this with a transform". Unfortunately, because flipped-270 is
so simple, it is really easy to have something that works for normal,
flipped-270, and nothing else. This encourages people to test with a
transform thats actually "hard".
In many clients of weston, Display was not being destroyed so added it.
Also destroy windows, widgets which were not being destroyed.
Signed-off-by: vivek <vivek.ellur@samsung.com>
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
Reviewed-by: Bryce Harrington <b.harrington@samsung.com>
Fixes a crash on touch devices without a pointer, when touching
the window frame of a client.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
sizeof returns size_t, for which the correct printf specifier is %zu.
Fixes the following warning when building for ARMv7.
src/compositor-wayland.c: In function 'wayland_output_get_shm_buffer':
src/compositor-wayland.c:260:3: warning: format '%ld' expects argument of type 'long int', but argument 2 has type 'unsigned int' [-Wformat=]
weston_log("could not zalloc %ld memory for sb: %m\n", sizeof *sb);
^
Signed-off-by: Thierry Reding <treding@nvidia.com>
When running the autogen.sh script, libtoolize complains thusly:
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Silence the warnings by following libtoolize's advice.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Animations are run off the repaint cycle so if there's nothing to
repaint, an animation will stop running. This is usually not a problem
as each frame function of an animation causes something to change and
therefore a repaint to happen. This patch helps detect when the
animation isn't in said case and triggers a repaint to keep the
animation running.
This problem was found by using weston_move_scale_run() to move a view
onscreen from completely off. The very first time the animation frame
function was called the progress wasn't enough to move it into
view. The compositor saw there was nothing to repaint and stopped
doing anything else. When something else (like a pointer move) forced
a redraw, the view's position was very much onscreen and jumped into
view in an ugly way.
Commit a7592019 introduced an optimization that caused some
exposay struct members to not be properly initialized, particularly
cur_output, leading to crashes in some circumstances (e.g. pressing
the down arrow key after going to exposay).
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Both weston_move_scale_run() and weston_slide_run() were broken in
commit 3a869019. Commit a4a6f161 fixed and explained the problem for
weston_slide_run() but weston_move_scale_run() remained broken.
To fix weston_move_scale_run(), weston_view_animation_run() is also
required. It was removed when _run() was split into two functions
_create() and _run() in commit f5cc2b56, but _run() was not added in
this commit.
This is to avoid recursing into weston_compositor_build_view_list()
and therefore fix crashing when destroying a stack of visible subsurfaces
due to weston_compositor_build_view_list() being called recursively
and corrupting the lists it works on.
https://bugs.freedesktop.org/show_bug.cgi?id=79684
This allows for easily testing a compositor's damage tracking in all
currently available configurations including wl_surface.buffer_transform,
wl_surface.buffer_scale, and wl_viewport. It also includes a
--rotating-damage that flag instructs the client to change the
wl_surface.buffer_transform on every commit. This tests the compositor for
proper handling of texture uploads even when the transform has changed but
the buffer size hasn't.
Also update configure.ac to require libinput 0.3 when enabled, as it is
the version where double replaced li_fixed_t.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Post release bump. The master branch version is always x.y.90,
where x.y is the most recent stable branch. This lets other packages
rely on git master as opposed to 1.5.0.
wl_list_for_each dereference's output to increment the
next iteration of the loop. However, output is free'd
inside the loop resulting in a dereference to free'd
memory.
Use wl_list_for_each_safe instead, which is designed to
handle this kind of pattern.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Once we've updated the window state and scheduled a resize, we know that
the next frame we send to the compositor will match the configured state.
This means we can just ack the configure immediately and not jump
through hoops to try to do it from the redraw stage.
As the protocol says, the states determine how the width and height
arguments should be interpreted, so it makes logical sense to do the
interpretation after.
With most of the code in send_configure_for_surface, the helper
methods don't give us that much benefit, so stop using them. We
can't kill them off, as they're part of the shell interface and
used by the WM.
Currently, there's a giant bug in how xdg-shell state management
is done. If a client calls set_fullscreen and then set_maximized,
it will get two configure events:
=> set_fullscreen
<= configure(800, 600, [STATE_FULLSCREEN])
=> set_maximized
<= configure(800, 560, [STATE_FULLSCREEN, STATE_MAXIMIZED])
Since fullscreen takes precedence over maximized, the client will
render full-screen at 800x600 first, and then 800x560 next. As
a result, the surface gets the wrong size.
This is because the code that sends out configure requests is
"immediate" -- when an app calls set_maximized, we immediately
send out the configure event that would have happened if we
transitioned immediately into maximized mode.
In wl_shell, this is correct behavior. However, in xdg-shell,
this is wrong. State needs to be more carefully managed in
xdg-shell, as states aren't exclusive.
Pull all the code that sends out configure events out and send
them centrally, based on Weston's on surface state management.
This should work with both wl_shell and xdg_shell's strategies.
Add a new state_changed_handler callback to the window to know when the
window has changed state; the terminal will use this to know when the
window started and ended its resize operation, and modify the terminal's
titlebar accordingly.
Marek Chalupa
Jasper St. Pierre
Jason Ekstrand
Jason Ekstrand
Boyan Ding
Andrew Wedgbury
Arnout Engelen
Peter Hutterer
vivek
Emilio Pozuelo Monfort
Srivardhan Hebbar
George Kiagiadakis
Thierry Reding
Jonny Lamb
Jonas Ådahl
Hardening
Kristian Høgsberg
U. Artie Eoff