Decode the new feedback flags.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
PRESENTATION_FEEDBACK_KIND_ZERO_COPY is a flag that needs to be set for
each surface separately. Some surfaces may be zero-copy (as defined by
Presentation feedback) while some are not.
A complication with Weston is that a surface may have multiple views on
screen. All copies (views) of the surface are required to be zero-copy
for the ZERO_COPY flag to be set.
Backends set per-view feedback flags during the assing_planes hook, and
then Weston core collects the flags from all views of a surface.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Change weston_output_finish_frame() signature so that backends are
required to set the flags, that will be reported on the Presentation
'presented' event. This is meant for output-wide feedback flags. Flags
that vary per wl_surface are subject for the following patch.
All start_repaint_loop functions use the special private flag
PRESENTATION_FEEDBACK_INVALID to mark, that this call of
weston_output_finish_frame() cannot trigger the 'presented' event. If it
does, we now hit an assert, and should then investigate why a fake update
triggered Presentation feedback.
DRM:
Page flip is always vsync'd, and always gets the completion timestamp
from the kernel which should correspond well to hardware. Completion is
triggered by the kernel/hardware.
Vblank handler is only used with the broken planes path, therefore do
not report VSYNC, because we cannot guarantee all the planes updated at
the same time. We cannot set the INVALID, because it would abort the
compositor if the broken planes path was ever used. This is a hack that
will get fixed with nuclear pageflip support in the future.
fbdev:
No vsync, update done by copy, no completion event from hardware, and
completion time is totally fake.
headless:
No real output to update.
RDP:
Guessing that maybe no vsync, fake time, and copy make sense (pixels
sent over network). Also no event that the pixels have been shown?
RPI:
Presumably Dispmanx updates are vsync'd. We get a completion event from
the driver, but need to read the clock ourselves, so the completion time
is somewhat unreliable. Zero-copy flag not implemented though it would
be theoretically possible with EGL clients (zero-copy is a per-surface
flag anyway, so in this patch).
Wayland:
No information how the host compositor is doing updates, so make a safe
guess without assuming vsync or hardware completion event. While we do
get some timestamp from the host compositor, it is not the completion
time. Would need to hook to the Presentation extension of the host
compositor to get more accurate flags.
X11:
No idea about vsync, completion event, or copying. Also the timestamp is
a fake.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Add the missing feedback flags to the Presentation extension protocol
specification.
These flags are slightly different from the previous RFCv3.1 definition:
http://lists.freedesktop.org/archives/wayland-devel/2014-March/013598.html
Now, all compositors are safe to use 0 as the flags if they don't bother
setting them properly. 0 is the "worst case" with the least guarantees.
The meaning of ZERO_COPY is not exactly the opposite of the old COPY
flag. ZERO_COPY is more strict, but applies only to that one surface.
Therefore it can be used to verify a zero-copy video playback pipeline,
also to a hardware overlay.
There is no longer a flag to clearly indicate if the final presentation
was done by a copy or a page flip. ZERO_COPY forbids the copy, but VSYNC
alone does allow copy in case it cannot tear. It is possible to have
first a compositing pass, and then another copy into the frontbuffer,
and still set VSYNC if it cannot tear. Usually "cannot tear" is too
hard to guarantee with a copy, so it often implies a page flip.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
When a function is named drm_output_FOO(), you'd expect it to take a
struct drm_output * as an argument. Convert
drm_output_prepare_scanout_view(), drm_output_prepare_overlay_view(),
drm_output_prepare_cursor_view() from weston_output to drm_output.
Additionally convert drm_sprite_crtc_supported() from weston_output to
drm_output.
This change makes drm_assign_planes() to operate on drm_output terms,
which makes further changes a tiny bit easier.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
The current parser directly reads a BOOLEAN on the PropertiesChanged
signal for 'Active' properties. However, all property-values are packed in
a VARIANT, otherwise, we wouldn't know the type. Fix the parser to recurse
into the variant before reading the boolean.
To avoid such bugs in the future, we extract the 'Active' parser into a
helper function parse_active(), which is then shared between the
PropertiesChanged and Get handlers.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Logind sends us a notification whenever the Active attribute of our session
changes. However, due to the way compositor-drm.c relies on the master DRM
device to be synced with the session, we used to delay Active=true
handling until the DRM device was up, too. See:
commit aedc7732eb
Author: David Herrmann <dh.herrmann@gmail.com>
Date: Sat Nov 30 11:25:45 2013 +0100
logind: delay wakeup until DRM-device is resumed
However, the other compositor backends do not use DRM, so logind-util will
never get notified about any DRM device. Therefore, we have to forward the
Active=true change immediately.
This commit fixes logind-util to take sync_drm as argument. If it is true,
we do DRM-device synchronisation, otherwise we don't.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=86889
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
xwayland uses SIGUSR1 as startup notification. Make sure to use SIGRTMIN
for VT handling to avoid conflicts.
A bonus is SIGRT* signals can be queued multiple times, so we will be able
to correctly track them and will no longer lose signals (which wouldn't
really matter, but is confusing in logs).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
xwayland uses SIGUSR1 as startup notification. Make sure to use SIGRTMIN
and SIGRTMIN+1 for VT handling.
A bonus is SIGRT* signals can be queued multiple times, so we will be able
to correctly track them and will no longer lose signals (which wouldn't
really matter, but is confusing in logs).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
libinput < 0.8 sent wheel click events with value 10. Since 0.8
the value is the angle of the click in degrees but it now provides
the click count as separate value. To keep backwards-compat with
existing clients, we just send multiples of the click count.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
libinput now provides a single event for scroll events. Extract the axes from
that event and split them into the wl events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
When the last pointer is removed from a seat, the pointer struct is
intentionally kept. This has some interesting side effects, so I've
documented it here so people like me don't errantly assume it's a bug.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The assertion in x11_compositor_find_output() can trigger during normal
shutdown, for example, when moving the mouse while hitting a hotkey to
close the weston window.
Instead we can remove the assert(), return NULL, and discard events
we can't find a destination output for.
v2 Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
v1 Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
wl_surface role error codes were added during the 1.6.90 development to
libwayland.
Reported-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A keyboard might not be present in a seat, so check that before
dereferencing keyboard related pointers.
Also, use the keyboard pointer we set to shorten the code a little bit.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
This fixes the breakage caused by "ivi-shell: make ivi-layout.c as a
part of ivi-shell.so"
hmi-controller.c:
A reference implementation of controller module does not use the layout
functions directly. This get function pointers at controller_module_init
which called by ivi-shell.
ivi-layout-export.h:
Definition of interfaces in a struction: ivi_controller_interface.
function pointers are set at ivi-layout.c.
ivi-layout-private.h:
Definition of some interfaces are remove bucause it is implemented in
ivi-layout.c and set it as function pointer. Several interfaces are kept
here because they are implemented in ivi-layout.c/transition.c but used
in other files.
ivi-layout-transition.c:
remove WL_EXPORT because export is not needed anymore.
remove unnesesary unsed method.
ivi-shell.c:
call controller_module_init of hmi-controller to init it and set
function pointers. If the interface_version is equal or
greater than what hmi_controller was built with, things are pass.
If the interface_version is smaller than what the controller expects,
it has to fail because it cannot work. This is followed the manner,
- never remove a function pointer
- never modify an existing function signature
- additions are allowed at the end of struct ivi_controller_interface
- all function pointers must always be populated and working in
ivi-shell.so (ivi-layout.c etc.)
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi-layout.so is separately built and loaded by using dlopen with
RTLD_GLOBAL. This was because these apis defined in ivi-layout.so shall
be used by ivi-modules; e.g. hmi-controller. This shall be improved that
a struct ivi_layout_api contains the whole exported API as function
pointers to be exposed as module_init.
This patch alone builds, but loading controller modules at runtime
failes. This failure will be fixed by following patches.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Interfaces for properties setting shall be implemented in ivi-layout.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In the future, re-alignmenet of WL_EXPORT per method should be done.
For that work, re-ordering is required to be used by another method.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi_layout_transition_layer_render_order is not necesary called. Remove
the method and methods called by it.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When ivi-module is not set in weston.conf, we probably want to tell the
user about their error instead of just dying.
Signed-off-by: Ondřej Majerech <majerech.o@gmail.com>
[Pekka: include Tanibata's suggestion, fix file name, fix surrounding
coding style]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
load_modules currently ignores errors signalled by both
weston_load_module and module_init, and instead always returns 0. Its
return value appears to be checked in callers, so we most likely want to
propagate any errors.
Signed-off-by: Ondřej Majerech <majerech.o@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The fd member of clipboard_source structure was not set
but was used in close().
v2. don't do unnecessary changes
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There were unchecked malloc and no free for this memory.
Also simplify error handling in one function.
v2. remove check if memory is NULL, according to man pages,
free(NULL) is a no-op
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
wl_display_dispatch() just dispatches events that are in
default and display queues and if there are no events,
then it will wait for them. But only dispatching
the events doesn't guarantee that we got all the global announcements,
we need to do sync too. Therefore use wl_display_roundtrip() instead
of wl_display_dispatch().
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
To produce the bug, build and run: (you don't need the game data to test)
https://github.com/clintbellanger/flare-engine/
$ mv ~/.config/flare ~/.config/flare.bak
$ ./flare # click 'configure', set full screen mode then click 'ok'
# weston will crash and dump core.
[Pekka: edited the commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Logging is activated and deactivated with the debug key binding 't'.
When activated, it creates a new log file, where it records the events.
The log file contains events and detailed object information entries in
JSON format, and is meant to be parsed in sequence from beginning to the
end.
The emitted events are mostly related to the output repaint cycle, like
when repaint begins, is submitted to GPU, and when it completes on a
vblank. This is recorded per-output. Also some per-surface events are
recorded, including when surface damage is flushed.
To reduce the log size, events refer to objects like outputs and
surfaces by id numbers. Detailed object information is emitted only as
needed: on the first object occurrence, and afterwards only if
weston_timeline_object::force_refresh asks for it.
The detailed information for surfaces includes the string returned by
weston_surface::get_label. Therefore it is important to set
weston_timeline_object::force_refresh = 1 whenever the string would
change, so that the new details get recorded.
A rudimentary parser and SVG generator can be found at:
https://github.com/ppaalanen/wesgr
The timeline logs can answer questions including:
- How does the compositor repaint cycle work timing-wise?
- When was the vblank deadline missed?
- What is the latency from surface commit to showing the new content on
screen?
- How long does it take to process the scenegraph?
v2: weston_surface::get_description renamed to get_label.
v3: reafctor a bit into fprint_quoted_string().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When printing out logs from Weston's actions, mainly for debugging, it
can be very difficult to identify the different surfaces. Inspecting
the configure function pointer is not useful, as the configure functions
may live in modules.
Add vfunc get_label to weston_surface, which will produce a short,
human-readable description of the surface, which allows identifying it
better, rather than just looking at the surface size, for instance.
Set the label function from most parts of Weston, to identify cursors and
drag icons, and panels, backgrounds, screensavers and lock surfaces, and
the desktop shell's application surfaces.
v2: renamed 'description' to 'label', so we get
weston_surface_set_label_func().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- introduces ivi-shell/input-panel-ivi.c which is basically copied
from desktop shell. It shall be improvaded to remove duplicate
implementation.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- introduces reference images used by weston-ivi-shell-user-interface.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- introduces ivi-shell-user-interface.c
This is launched from hmi-controller by launch_hmi_client_process and
invoke a
client process.
The basic flow is as followed,
1/ process invoked
2/ read configuration from weston.ini.
3/ draw png file to surface according to configuration of weston.ini
4/ all parts of UI are ready. request "UI_ready" to draw UI.
5/ Enter event loop
6/ If a surface receives touch/pointer event, followings are invoked
according
to type of event and surface
6-1/ If a surface to launch ivi_application receive touch up, it execs
ivi-application configured in weston.ini.
6-2/ If a surface to switch layout mode receive touch up, it sends a
request,
ivi_hmi_controller_switch_mode, to hmi-controller.
6-3/ If a surface to show workspace having launchers, it sends a
request,
ivi_hmi_controller_home, to hmi-controller.
6-4/ If touch down events happens in workspace,
ivi_hmi_controller_workspace_control is sent to slide workspace.
When control finished, event:
ivi_hmi_controller_workspace_end_control
is received.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- hmi-controller.so
- introduces hmi-controller.so
The library is used to manage layout of surfaces/layers. Layout change
is triggered by ivi-hmi-controller protocol, ivi-hmi-controller.xml. A
reference how to use the protocol, see ivi-shell-user-interface.c.
In-Vehicle Infotainment system usually manages properties of
surfaces/layers by only a central component which decide where
surfaces/layers shall be. This is differenct use case from desktop
style; each application can request property of its window via xdg-shell
protocol, like fullscreen and set its to top level. In-Vehicle
Infortainment system doesn't allow each application to chagen them from
its application because of safty reasons. The concept of layer is
simillar with a use case of cursor layer of Destop. For In-Vehicle
Infortainment system, it is extended to all applications. For example,
rearview camera application is assigned to a layer to group several
surfaces, e.g. captured image and drawing lines separately. Central
manaegr can control property of the layer of rearview camera.
This reference show examples to implement the central component as a
module of weston.
Default Scene graph of UI is defined in hmi_controller_create. It
consists of
- In the bottom, a base layer to group surfaces of background, panel,
and buttons
- Next, a application layer to show application surfaces.
- Workspace background layer to show a surface of background image.
- Workspace layer to show launcher to launch application with icons.
Paths to binary and icon are defined in weston.ini. The width of
this layer is longer than the size of screen because a workspace
has several pages and is controlled by motion of input.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- introduces ivi-hmi-controller.xml
This protocol realizes following features,
- UI ready
- changing modes; tiling, side by side, full_screen, and random
- Give control a surface; workspace to be controlled by using ivi layout
APIs
- Display/undisplay a surface; home contains sevaral workspaces to
launch applications
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- ivi-shell.so
- introduces ivi-shell/ivi-shell.[ch]
In-Vehicle Infotainment system traditionally manages surfaces with
global identification. A protocol, ivi_application, supports such a
feature by implementing a request, ivi_application::surface_creation
defined in ivi_application.xml.
The ivi-shell explicitly loads ivi-layout.so and a module to add
business logic like how to layout surfaces by using ivi-layout APIs.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- ivi-layout.so
- introduces ivi-layout-export.h, ivi-layout.[ch]
API set of controlling properties of surface and layer which groups
surfaces. An unique ID whose type is integer is required to create
surface and layer. With the unique ID, surface and layer are identified
to control them. The API set consists of APIs to control properties of
surface and layers about followings,
- visibility.
- opacity.
- clipping (x,y,width,height).
- position and size of it to be displayed.
- orientation per 90 degree.
- add or remove surfaces to a layer.
- order of surfaces/layers in layer/screen to be displayed.
- commit to apply property changes.
- notifications of property change.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- introduces ivi-application.xml
Many applications in an IVI-system are special single-purpose
applications that have a very specific role in the whole IVI UI, for
example a rear camera, speedometer, map, etc. The IVI system vendor
specifies what these are and how they integrate into the UI. They also
vary between particular IVI systems. This is why we use (system-)global,
unique, pre-determined ID numbers to tell what wl_surface is which
application, instead of writing specific shell requests for each one.
Using ID numbers allows vendors to easily invent new component
applications without extending or breaking the actual Wayland protocol.
In IVI-systems, the ID is a standard concept already used in several
APIs, with a vendor-specified global definition of ID assignments.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Pekka Paalanen
Bryce Harrington
David Herrmann
Jonas Ådahl
Peter Hutterer
Derek Foreman
Nobuhiko Tanibata
Giulio Camuffo
Ondřej Majerech
Marek Chalupa
Andrew Engelbrecht
Pekka Paalanen