As only seat0 supports TTYs, this changes the logind launcher where
it detects a TTY, only if the seat is seat0. This has only been
tested for logind
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This allows the fbdev backend to run on, and use devices from the
specified seat, similar to the drm backend.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This will allow the seat to be set by the environment as pam_systemd typically
sets the XDG_SEAT variable
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Had a stale libdrm sitting around which gave me errors, both fixed with the
.68 version.
libweston/pixel-formats.c:291:13: error: ‘DRM_FORMAT_NV24’ undeclared here
(not in a function); did you mean ‘DRM_FORMAT_NV21’?
.format = DRM_FORMAT_NV24,
^~~~~~~~~~~~~~~
DRM_FORMAT_NV21
libweston/pixel-formats.c:296:13: error: ‘DRM_FORMAT_NV42’ undeclared here
(not in a function); did you mean ‘DRM_FORMAT_NV12’?
.format = DRM_FORMAT_NV42,
^~~~~~~~~~~~~~~
DRM_FORMAT_NV12
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a new boolean output section key "force-on". When set to true, the
output will be enabled regardless of connector status. This is the
opposite of the mode=off setting.
Forcing connectors on is useful in special circumstances: avoid output
configuration changes due to hotplug e.g. with KVM switches, or hardware
with unreliable connector status readout for example.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Add a new output section key "same-as" for configuring clone mode. An
output marked "same-as" another output will be configured identically to
the other output.
The current implementation supports only CRTC sharing for clone mode.
Independent CRTC clone mode cannot be supported until output layout
logic is moved from libweston into the frontend and libweston's damage
tracking issues stemming from overlapping outputs are solved.
Quite a lot of infrastructure is needed to properly configure clone
mode. The implemented logic allows easy addition of independent CRTC
clone mode once libweston supports it. The idea is that wet_layoutput is
the item to be laid out and all weston_outputs a wet_layoutput
contains show exactly the same area of the desktop.
The configuration logic attempts to automatically fall back to creating
more weston_outputs when all heads do not work under the same
weston_output. For now, the fallback path ends with an error message.
Enabling a weston_output is bit complicated, because one needs to first
collect all relevant heads, try to attach them all to the weston_output,
and then back up head by head until enabling the weston_output succeeds.
A new weston_output is created for the left-over heads and the process
is repeated.
CRTC-sharing clone mode is the most efficient clone mode, offering
synchronized scanout timings, but it is not always supported by
hardware.
v10:
- rebased trivial conflicts in man page
- switch to gitlab issue URL
v9:
- replace weston_compositor_set_heads_changed_cb() with
weston_compositor_add_heads_changed_listener()
- remove workaround in simple_head_enable()
v6:
- Add man-page note about cms-colord.
- Don't create an output just to turn it off.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/22
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Rename the IVI tests to be more consistent with the others, and invert
the naming of plugin/client to make it slightly more clear what's going
to happen. Handle the renaming by using wet_get_binary_path to rewrite
the local binaries.
As a side-effect, weston.ini ivi-shell-user-interface no longer needs to
be given as an absolute path.
Signed-off-by: Daniel Stone <daniels@collabora.com>
v2:
Call ivi-layout.ivi as ivi-layout-test-client.ivi to keep the same name
in both the file and the lookup, so that the module map does not need to
change the name.
Update code comments to reflect the new names.
Rename ivi_layout-test-plugin.c to ivi-layout-test-plugin.c.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
There are no users left.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Now that WESTON_MODULE_MAP supersedes WESTON_BUILD_DIR for libexec
binaries, we don't need to check in WESTON_BUILD_DIR anymore.
There was only one user of weston_config_get_libexec_dir(), so remove
the whole function. There is no reason to export it.
Due to libshared.la being pulled into libweston, this probably was
libweston ABI unintended. Regardless, libweston major has already been
bumped.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Rather than having a hardcoded dependency on the build-directory layout,
use an explicit module-map environment variable, which rewrites requests
for modules and helper/libexec binaries to specific paths.
Pekka: This will help with migration to Meson where setting up the paths
according to autotools would be painful and unnecessary.
Emre: This should also help setting up the test suite after a
cross-compile.
Pekka: A caveat here is that this patch makes it slightly easier to load
external backends by abusing the module map. External backends are
specifically not supported in libweston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
v2:
Fixed ivi_layout-test-plugin.c:wet_module_init().
Do not change the lookup name of ivi-layout.ivi.
Improved documentation of weston_module_path_from_env() and made it cope
with map strings that a) do not end with a semicolon, and b) have
multiple consecutive semicolons.
Let WESTON_MODULE_MAP be printed into the test log so that it is easier
to run tests manually.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Suggested by Emil: Use a variable for strlen(name).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Replace a few hardcoded paths with the substitutes
https://gitlab.freedesktop.org/wayland/weston/issues/105
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Triggered by weston --help, the usage() output should not look like an error.
Note that there is only one caller of usage() at the moment, but let's handle
this here based on the status in case we add other cases.
https://gitlab.freedesktop.org/wayland/weston/issues/112
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If the user is in group 0, we'd exit the loop early with a failure. Make sure
we run through all groups.
https://gitlab.freedesktop.org/wayland/weston/issues/86
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
[Pekka: fix one whitespace]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Update issue report and build instruction URLs for moving to GitLab, and
for everything having been HTTPS-only for quite some time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
eglTerminate should be called before the display was disconnected.
Signed-off-by: Yong Gan <yong.gan@nxp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
All outputs is canceled repaint when a output repaint is failed. At that
time, the output whose repaint is success is not scheduled because the
repaint status of that is still REPAINT_AWAITING_COMPLETION. Therefore,
we need to reset repaint schedule for all repainted outputs.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a GitLab CI configuration which tests building, 'make check', and
'make distcheck' of the tree inside a Debian Stretch container. The
choice of distribution base was arbitrary and may easily be changed.
As the version of wayland-protocols available is not sufficiently new,
we clone and build our own local version first. libwayland is new
enough, however we could potentially reuse the artifacts generated by
the Wayland CI job.
When commits are pushed to upstream, the commits will run this CI
pipeline to run these tests, and capture the result as an artifact
bundle, including the compiled binaries and full test suite logs.
Results can be seen at:
https://gitlab.freedesktop.org/wayland/weston/pipelines/
Signed-off-by: Daniel Stone <daniels@collabora.com>
This is not to be installed, except maybe as a doc. It is just an
example of what one might do. It also has not been tested, it's just
for giving an idea of what it should do.
It also contains untested speculation.
v2:
- use syspath instead of devpath
- add license blurb
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The new calibrator uses weston_touch_calibration protocol extension and
provides the following features:
- chooses the physical touch device to be calibrated by DEVPATH or by
the output/head name; device enumeration provided
- the compositor ensures the calibrator window is shown in the correct
position and size
- no matter how wrong the old calibration is, the touch events will
always arrive in the application
- the calibration is complete, not incremental; the received touch
events are guaranteed to be unmodified
- computes a libinput style calibration matrix directly, not the
WL_CALIBRATION format
- supports multiple touch devices: calibrate one device at a time, and
show user feedback on touching a wrong device instead of recording bad
data
- uses four touch point samples: three to compute the calibration, and
one to verify the calibration is roughly correct
- consistent exit codes
- upload the new calibration into the server after successful
and verified calibration
Due to using special touchscreen calibration protocol extension, this
application cannot be tested without touch input from the compositor.
Practically all of the above mentioned are unlike how the old
calibrator client worked.
Co-developed by Louis-Francis and Pekka.
v2:
- improve help() text
- rename wrong_touch_handler() to invalid_touch_handler()
- improve debug prints by adding sample number
- reorganize code into sample funcs vs. touch funcs
- add a state machine to properly process touch and related events
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add an option to enable the touchscreen calibrator interface. This is a
global on/off toggle, in lack of more fine-grained access restrictions.
As Weston should not hardcode system specifics, the actual permanent
saving of a new calibration is left for a user supplied script or a
program. Usually this script would write an appropriate udev rule to set
LIBINPUT_CALIBRATION_MATRIX for the touch device.
Co-developed by Louis-Francis and Pekka.
v2:
- use syspath instead of devpath
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This implements a new global interface weston_touch_calibration, which
allows one client at a time to perform touchscreen calibration. This
also implements the calibrator window management.
A client asks to calibrate a specific physical touch device (not a
wl_seat which may have several physical touch devices aggregated).
Libweston grabs all touch devices and prevents normal touch event
handling during the calibation sequence.
API is added to enable this new global interface, but it not yet called
by anything. Since the implementation allows clients to grab touch devices
arbitrarily, it is not enabled by default. The compositor should take
measures to prevent unexpected access to the interface.
A client may upload a new calibration to the compositor. There is a
vfunc to allow the compositor to reject/accept it and save it to
persistent storage. The persistent storage could be a udev rule
setting LIBINPUT_CALIBRATION_MATRIX, so that all display server would
load the new calibration automatically.
Co-developed by Louis-Francis and Pekka.
v2:
- use struct weston_point2d_device_normalized
- use syspath instead of devpath
- wrong_touch was renamed to invalid_touch
- rename weston_touch_calibrator::cancelled to calibration_cancelled
- send invalid_touch on out-of-bounds touch-down
- cancel touch sequence and send invalid_touch on motion going
out-of-bounds
- rename calcoord_from_double() to wire_uint_from_double()
- send bad_coordinates error in touch_calibrator_convert()
- conversion results in 0,0 if cancelled
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a Wayland protocol extension to allow the calibration of
touchscreens in Weston.
See: https://phabricator.freedesktop.org/T7868
v2:
- replace "server" with "compositor"
- rephrase error conditions to be simpler
- reword the matrix description in 'save' request
- rephrase when touch_device events are sent
- change device id to DEVPATH with "/sys" prefix
- qualify calibration units better
- replace wrong_touch event with a more generic invalid_touch
- fix error enum and add bad_coordinates
- convert while cancelled will not raise any errors
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In addition to the normal touch event processing mode, introduce a new
mode for calibrating a touchscreen input device.
In the calibration mode, normal touch event processing is skipped, and
the raw events are forwarded to the calibrator instead. The calibrator
is not yet implemented, so the calls will be added in a following patch.
To switch between modes, two functions are added, one for entering each
mode. The mode switch happens only when no touches are down on any touch
device, to avoid confusing touch grabs and clients. To realise this, the
state machine has four states: prepare and actual state for both normal
and calibrator modes.
At this point nothing will attempt to change the touch event mode.
The new calibrator mode is necessary, because when calibrating a
touchscreen, the touch events must be routed to the calibration client
directly. The touch coordinates are expected to be wrong, so they cannot
go through the normal focus surface picking. The calibrator code also
cannot use the normal touch grab interface, because it needs to be able
to distinguish between different physical touch input devices, even if
they are part of the same weston_seat. This requirement makes
calibration special enough to warrant the new mode, a sort of "super
grab".
Co-developed by Louis-Francis and Pekka.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit a30e29af2e introduced the code to
deal with a touchscreen with touches already down when Weston starts
using it. It fixed the touchpoint counting problem.
However, Weston still should not forward or process the unmatched
touch-ups either. Code inspection says it would confuse the
idle-inhibit counting, and it could probably confuse clients as well.
Hence, just drop unmatched touch-ups.
Enhance the warning message to allow identifying where the event came
from.
v2:
- use syspath instead of devpath
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The touchpoint counting is needed regardless of what we do with the
touch events, so move it out of process_touch_normal() into the caller
notify_touch_normalized().
This is pure refactoring.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
notify_touch_normalized() is an extended form of notify_touch(), adding
normalized touch coordinates which are necessary for calibrating a
touchscreen.
It would be possible to invert the transformation and convert from
global coordinates to normalized device coordinates in input.c without
adding this API, but this way it is more robust against code changes.
Recovering normalized device coordinates is necessary because libinput
calibration matrix must be given in normalized units, and it would be
difficult to compute otherwise. Libinput API does not offer normalized
coordinates directly either, but those can be fetched by pretending the
output resolution is 1x1.
Anticipating touch calibration mode, the old notify_touch() is renamed
into a private process_touch_normal(), and the new
notify_touch_normalized() delegates to it.
Co-developed by Louis-Francis and Pekka.
v2:
- introduce struct weston_point2d_device_normalized
- rename notify_touch_cal() to notify_touch_normalized()
- remove WESTON_INVALID_TOUCH_COORDINATE
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Relay touch input events into libweston core through the
weston_touch_device, so that the core can tell which individual physical
device they come from.
This is necessary for supporting touchscreen calibration, where one
needs to process a single physical device at a time instead of the
aggregate of all touch devices on the weston_seat.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Move calibration printing here and call do_set_calibration() from
evdev_device_set_calibration() so that all matrix setting paths print
the same way.
Print the matrix values in a matrix style to help readability, and
mention the input device.
v2:
- use 'cal' instead of 'calb' as variable name
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Introduce weston_touch_device for libweston core to track individual
touchscreen input devices. A weston_seat/weston_touch may be an
aggregation of several physical touchscreen input devices. Separating
the physical devices will be required for implementing touchscreen
calibration. One can only calibrate one device at a time, and we want to
make sure to handle the right one.
Both backends that support touch devices are updated to create
weston_touch_devices. Wayland-backend provides touch devices that cannot
be calibrated, because we have no access to raw touch coordinates from
the device - calibration is the responsibility of the parent display
server. Libinput backend provides touch devices that can be calibrated,
hence implementing the set and get calibration hooks.
Backends need to maintain an output pointer in any case, so we have a
get_output() hook instead of having to maintain an identical field in
weston_touch_device. The same justification applies to
get_calibration_head_name.
Also update the test plugin to manage weston_touch_device objects.
Co-developed by Louis-Francis and Pekka.
v2:
- Consistently use 'cal' instead of 'calb' or 'matrix'.
- change devpath into syspath
- update copyrights
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes a memory leak by calling wl_keyboard_destroy on any keyboard
that was used to listen for events.
Signed-off-by: Markus Ongyerth <wl@ongy.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This now prints each tablet seat with at least one tablet/pad/tool
attached.
For each tablet seat, each tablet, pad and tool is printed with as much
detail about the device as the protocol provides.
Seat info is stored to be referenced, because the protocol requires to
request a tablet_seat for each wl_seat and it's not guaranteed that the
tablet_v2_manager is available when seats are advertised.
Signed-off-by: Markus Ongyerth <wl@ongy.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In GNOME (but not in Weston), if a window loses focus, the client first receives
the focus event, then the unlock/unconfine event. This causes toytoolkit to
dereference a NULL window when unlocking or unconfining the pointer.
To repro:
- Run weston-confine
- Click the window
- Alt-Tab away from it
Result:
[1606837.869] wl_keyboard@19.modifiers(63944, 524352, 0, 0, 0)
[1606837.926] wl_keyboard@19.leave(63945, wl_surface@15)
[1606837.945] wl_pointer@18.leave(63946, wl_surface@15)
[1606837.956] wl_pointer@18.frame()
[1606837.961] zwp_confined_pointer_v1@26.unconfined()
Segmentation fault (core dumped)
To fix this, get the input from the window instead of the other way around.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This makes --import-format=NV12 testable on e.g. intel
We only set nv12_format_found to true if we found that format and at
least one understood modifier. Store modifier verbatim instead of using
a boolean flag. Last advertised and supported modifier currently wins.
The NV12 DRM_FORMAT_LINEAR image should be green in the upper left
corner and white in the lower right.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than segfaulting by attempting to traverse an initially
null log handler pointer, explicitly print a message and abort.
Signed-off-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
[Pekka: coding style fix]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Only exit from main so control flow is in one place.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The SURFACE_BITS_COMMAND struct has changed and some members have been moved in the
bmp field.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Very useful for TRANSIENT_FOR property debugging.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Add code to dump CARDINAL arrays from properties. Useful for debugging.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Running 'weston-simple-egl -f -b' (fullscreen, unthrottled) caused a
crash in shell_ensure_fullscreen_black_view() due to
shsurf->fullscreen_output being NULL. Also shell_configure_fullscreen()
could crash on that condition.
Fix shell_configure_fullscreen() to bail out with minimal work if there
is no fullscreen_output.
It is unclear if anything will cause a reconfiguration when an output is
plugged in.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
In activate, do not call lower_fullscreen_layer() at all if the output
is NULL. It should not do anything in that case, per the existing
comment.
This is a tentative crash fix for a case where there are no enabled
weston_outputs at all.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
This is a tentative crash fix for a case where there are no enabled
weston_outputs at all.
If no output is given, just put the surface at 0,0. At least it should
become mostly visible if an output is plugged in, if not centered.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
This is a tentative crash fix for a case where there are no
enabled weston_outputs at all.
Let get_output_work_area() return a zero area if the given output is
NULL. If there is no output, there is no area. Unfortunately we cannot
return "no position" but have to use 0,0 instead.
In send_configure_for_surface(), this causes a maximized surface to
receive width=0 and height=0 in the configure event, which means the
client is free to choose the size. There is no correct size to send for
maximizing for no output.
In constrain_position(), this has no effect. The interactive move of a
surface is restricted to not go below the panel, so even if a user
managed to move a surface without an output, it just prevents the
surface moving beyond y=0.
In weston_view_set_initial_position(), get_output_work_area() will not
be called with NULL output anyway.
In set_maximized_position(), this makes it behave as if the output was
at 0,0 which is the default position of the first output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
nerdopolis
Peter Hutterer
Pekka Paalanen
Matheus Santana
Daniel Stone
Yong Gan
Tomohito Esaki
Louis-Francis Ratté-Boulianne
Markus Ongyerth
Dima Ryazanov
Guido Günther
Matt Hoosier
David Fort