Adds a minimalistic API for managing the subscription object. The
subscribe functionality will be brought in once we re-organize a bit
weston-debug-stream and split it properly. It extends the logging
context with a linked list of potential subscription and adds a linked
list of subscriptions in the log scope.
This patch represents the start of a logging framework for weston. It's
being built around weston-debug, with the intent to superseded it, and
make weston-debug a client of the framework. Further more the logging
framework should replace current logging handler and allow other types
of streams to be used.
Currently present in libweston under weston-debug we have log scopes, debug
streams and a logging context.
With this patch, two (internal) objects are being added: the concept of
a subscriber and the concept of subscription. The subscription object
is a ephemeral object, implicitly managed which is created each time one
would want to a subscribe to a scope. The scope will maintain a list of
subscriptions and will continue to be explicitly managed.
The streams will use the subscriber object as a base class to extend
upon. By doing so it allows to customize the stream with specific
functions that manipulate the underlaying storage. The subscriber object
will require a subscribe function and specific stream functions and like
the scope, will be explicitly managed.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Introduce a new private header file that only internal backends are
allowed to use. Starts by migrating functions that operate on the
'struct weston_head'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Introduce a new private header file that only internal parts of the
library are allowed to use and shouldn't be exposed in the public header
of libweston.
Start by adding by adding functions that operate on the 'weston_buffer*'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
logind will send a device changed at start of day, prompting a session
active change, but the session will already be active from compositor
creation.
Avoid unnecessary signal emition and drm state invalidation.
The logind launcher sets the session active when the graphics device is
assigned to weston from systemd. Unfortunately 8d23ab78 didnt check whether the
session was already active before setting it active and emitting the session
active signal.
The handler for that signal then proceeds to invalidate the entire graphics
state, causing the next redraw to reconfigure all outputs (to the same routing
as they were already).
This then massively increases the likelihood of trying to configure a crtc that
has a commit already in flight.
Add the old behaviour of only emitting a signal on a changed state.
This avoids the issue for now by reducing the chances of a clash. Future
work will need to fix the issue properly (better handling of state_invalid e.g.
wait for quiescence, better monitoring for crtc usage clashes etc).
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Depending on system loading, weston-launcher could drop the drm
master access before the compositor and all the clients receive
the notification. In this case, some commit could be sent to the
drm driver too late and get refused with error EACCES.
This error condition is not properly managed and causes weston to
hang.
Change the return type of start_repaint_loop() and repaint_flush()
from void to int, and return 0 on success or -1 if the repaint has
to be cancelled.
In the callers of start_repaint_loop() and repaint_flush() handle
the return value and cancel the repaint when needed.
In backend-drm detect the error EACCES and return -1.
Note: to keep the code cleaner, this change inverts the execution
order between weston_output_schedule_repaint_reset() and
repaint_cancel().
No need to wait for suspend or for any notification; in case the
weston reschedules a repaint, it will get EACCES again.
At resume, damage-all guarantees a complete repaint.
This fix is for atomic modeset only.
Legacy modeset suffers from similar problems, but it is not fixed
by this change. Since drm_pending_state_apply() never returns
error for legacy modeset, this change has no impact on legacy
modeset.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/117
Unfortunately, our y_invert helper also forgot to free the region it
transformed to. Clean up our allocation before we exit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In 55bcb93fef ("gl-renderer: Use helper for conversion to EGL rects"),
we extracted and lovingly commented the transformation from global to
output co-ordinate space used for EGL_KHR_swap_buffer_with_damage, into
a new helper function.
The commenting correctly noted the steps we need to perform the
transformation: shifting by the output's offset into global space,
followed by applying the output's scale and rotation transformations.
Unfortunately, the code did not live up to the high standards of the
comment, and forgot to translate by the output's offset. This meant that
for multiple outputs, we would probably end up with wildly out-of-bounds
co-ordinates.
Fix the code to first translate by the output's offset in global space,
ensuring that both our swap_buffers_with_damage, and our partial_update
co-ordinate sets, can spark joy for those blessed with more than one
output.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The GBM and DRM constants have the same meaning. In preparation
to make the DRM backend compile without libgbm, prefer the DRM
constants where GBM is not needed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
The content protection protocol requires that in enforced mode, parts of the
surfaces which lie on outputs with protection level lower than that of the surface
be censored. This patch uses a solid shader to color such regions with
dark red.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
This patch enables a user to opt for HDCP per output, by writing into
the output section of weston.ini configuration file. HDCP is always
enabled by default for the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The change in an output's content-protection may trigger a change in
the surface's content-protection status, and inturn the
content-protection available for the client.
This patch recomputes the content-protection level for a surface,
in case there is a change in content-protection level of an output,
showing the surface. In case of a change in the surface's
content-protection, the client associated with that surface is
notified.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
This patch adds the content-protection protocol implementation, to
enable a weston client application to request for content-protection
for its content via HDCP.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The protection requested for a given surface, must reach through the
weston_surface::pending_state, in the commit-cycle for the
weston_surface, so that it gets updated in the next commit.
As some protection is requested for a given weston_surface, it means
protection must be set for each of the outputs which show the surface.
While setting the protection of a weston_output, care must be taken
so as to avoid, degrading the protection of another surfaces, enjoying
the protection. For this purpose, all the weston_surfaces that are
shown on a weston_output are checked for their desired protection.
The highest of all such desired protections must be set for the
weston_output to avoid degrading of existing protected surfaces.
A surface requesting protection for a lower content-type can still be
provided protection for a higher type but the converse cannot be
allowed.
This patch adds support to set content-protection for a suface, which
inturn sets the content-protection for each of the outputs on which
it is shown, provided, none of the existing surface's protection
request is downgraded.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The actual protection status for a given weston_head depends upon the
corresponding drm_head's connector HDCP properties. On the other hand,
the actual protection for a weston_output is the minimum of the
protection status of its attached heads.
As a head's protection changes, the current protection of the output
to which the head is attached is recomputed.
This patch adds the support to keep track of the current
content-protection for heads and the outputs.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
For making an output secure, the content-protection should be set for
each of head attached to that output. So whenever the protection for
a weston_output is desired, it means that protection is desired for
each of the weston_head attached to that weston_output.
This patch introduces a new enum in libweston to represent the
requested/current protection statuses, equivalent to the type enum
defined by the weston-secure-output protocol. The new enum helps to
extend the content-protection status and requests to libweston and
the backends.
This patch also adds a new member desired_protection to store the
desired protection for an output in weston_output.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The xdg-output resources are listed in each head struct. They become idle when
the respective weston_output has been removed again. The client is supposed to
destroy them explicitly afterwards.
After starting an XWayland client xrandr displays the logical size as expected.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
drm_assign_planes() is called to separate views out and decide what will
be taken out for plane composition and what will be left for the
renderer to compose.
It calls drm_output_propose_state() in order to find a good
configuration, which itself has a number of helpers that it calls. Break
these out into a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Most of the state helpers (create, destroy, duplicate, etc) state, are
relatively straightforward and can live in a separate file.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file which handles most of the actual KMS API use. This
covers the property handling (in which we map between KMS properties and
our internal representations), as well as actually applying state
through atomic modesetting or the legacy SetCrtc/PageFlip/DPMS APIs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new file for the DRM backend's handling of output modes, e.g.
resolution, aspect ratio, preferred mode selection, EDID parsing.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a helper function which populates a drm_head with the information
extracted from its connector's EDID and any other properties we can
find, such as physical size and connection status.
This is currently quite small, but may become more complex in future as
we parse EDID better. It also prepares to move this function into
another file in the next commit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Create a new header called drm-internal.h, and move many of drm.c's
declarations and helpers to it.
This will allow us to split the DRM backend into multiple files.
Signed-off-by: Daniel Stone <daniels@collabora.com>
partial_update is an EGL extension which allows us to inform the driver
ahead of time the limits of the areas we'll be writing to. This helps
performance for GPU hardware which renders into a local tile buffer:
informing the driver of the rendering extents means it can avoid
fetching unchanged tiles into the tile buffer and subsequently writing
them out.
The extension complements rather than replaces EGL_EXT_buffer_age (used
before partial_update to know which areas we need to update) and
EGL_KHR_swap_buffers_with_damage (used after partial_update to inform
the winsys of the changed region).
Note however that partial_update deals in buffer-damage regions ('what
has changed since the last time I used _this_ buffer?'), whereas
swap_buffers_with_damage deals in surface-damage regions ('what has
changed since the last time I rendered?'). An explanatory diagram can be
found in the specification:
https://www.khronos.org/registry/EGL/extensions/KHR/EGL_KHR_partial_update.txtFixes: #134
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add some comments in the function to make it clear what's going on,
especially as we twist and turn between a lot of things called 'damage'
meaning different things in different co-ordinate spaces.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The buffer_damage variable stores accumulated damage from previous
frames. This is the area that, before considering our current repaint
request, we need to repaint in order to bring the older buffer up to
date with the last buffer we rendered into.
Rename to previous_damage so it's a bit more clear what this refers to.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Technically it is storing which areas of the border are damaged.
However, we already have damage-region variables which need to be
translated by the border region. Rename the variable to not contain the
word 'damage' to reduce confusion.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Marius Vlad
Pekka Paalanen
Robert Beckett
Antonio Borneo
Daniel Stone
Stefan Agner
Harish Krupo
Ankit Nautiyal
Roman Gilg
Tomohito Esaki