Add a new boolean weston.ini option, "allow-zap" to enable or disable
the Ctrl-Alt-Backspace key combination.
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
The xwm used to automatically send to Xwayland the position of X windows
when that changed, using the x,y of the primary view of the surface.
This works fine for the desktop shell but less so for others.
This patch adds a 'send_position' vfunc to the weston_shell_client that
the shell will call when it wants to let Xwayland know what the position
of a window is.
The logic used by the desktop-shell for that is exactly the same the xwm
used to have.
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: David Fort <contact@hardening-consulting.com>
Keep all per client wl_pointer resources in a new struct called
'weston_pointer_client'. When focus changes, instead of moving a list
of resources between different lists, just change the focused pointer
client.
The intention with this is to make it easier to add wl_pointer
extensions that share the same focus as the corresponding wl_pointer.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of only passing absolute pointer coordinates, effectively
loosing motion event data, pass a struct that can potentially contain
different types of motion events, currently being absolute and relative.
A helper function to get resulting absolute coordinates was added for
when previous callbacks simply used the (x, y) coordinates.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't fill a useful function and is not intended to be continued.
If there is need for workspace manipulation from clients a protocol
based on those future needs need to be properly designed.
workspaces.xml is probably not very relevant since it did the bare
minimum.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In the effort of going away from generic names of protocols only
relevant for weston, rename the weston desktop shell
weston_desktop_shell.
This also resets the version to 1, as there will be no prior versions
to weston_desktop_shell.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Jasper St. Pierre <jstpierre@mecheye.net>
Don't only send motions and buttons but also axis events through the
pointer grab interface.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
In preparation for further refactoring. This patch also removes a
redundant NULL check. Since we pass views, and views will always have an
associated surface, there is no point of checking if it has.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
commit f814c5dc9 changed get_output_work_area behaviour
which broke the code for positioning maximized window.
The x position was set to 2*output->x instead of to output->x
fix https://bugs.freedesktop.org/show_bug.cgi?id=92357
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
get_shell_surface(parent) may return NULL if the client passed a
unassigned wl_surface or a wl_surface with a non-shell surface role
(such as cursor role).
https://bugs.freedesktop.org/show_bug.cgi?id=92316
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Transient surfaces use child/parent surfaces for stacking order. This
change resloves an issue in which attempting to move or rotate a
toplevel transient surface can move or rotate its ancestor.
This stops us from rotating or moving pop-up menus by instead rotating
their parents.
This is easiest to see using a multi-seat configuration.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
It's actually possible to get here after the surface has been destroyed,
especially when running client apps under valgrind.
That probably shouldn't be able to segfault the compositor.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Valgrind has shown that in at least one place (default_grab_pointer_focus)
we're testing uninitialized values coming out of weston_compositor_pick_view.
This is happening when default_grab_pointer_focus is called when there is
nothing on the view list, and during the first repaint when only the black
surface with no input region exists.
This patch adds a function to clear pointer focus and also set the sx,sy
co-ordinates to a sentinel value we shouldn't compute with.
Assertions are added to make sure any time pointer focus is set to NULL
these values are used.
weston_compositor_pick_view() now returns these values too.
Now the values are always initialized, even when no view exists, and
they're initialized in such a way that actually doing computation
with them should fail in an obvious way, but we can compare them
safely for equality.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This makes it consistent with the pointer grab, which also gets
global coordinates and not surface relative ones, and allows to
easily filter out gestures based on compositor global hotspots.
Reviewed-by: Daniel Stone <daniels@collabora.com>
An earlier patch made surface_resize() and surface_move() take pointers
instead of seats, this updates the weston_shell_interface resize and move to
match.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This prevents a use after free when the surfaces are automatically cleaned
up later, as shell_client's freed node was still in the surface list.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Keyboards and pointers aren't freed when devices are removed, so we should
really be testing keyboard_device_count and pointer_device_count in most
cases, not the actual pointers. Otherwise we end up with different
behaviour after removing a device than we had before it was inserted.
This commit renames the touch/keyboard/pointer pointers and adds helper
functions to get them that hide this complexity and return NULL when
*_device_count is 0.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We should be testing device counts, not pointers. The pointers are
persistent state that never gets freed, and are an inaccurate indicator
of device presence after a release.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
seat->keyboard_focus_listener.link isn't a head, it's just sometimes a
member of the focus signal list. Calling wl_list_init() on it puts
a loop in the list.
Instead, we remove the item then init it. That way we can call remove on
it again later even if it hasn't been re-added to a list.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Track the seat that initiated a seat instead of picking the first one.
Previously, if there are multiple seats then any seat can adjust the zoom
level but the zoom tracks the first seat's pointer.
Now the zoom will follow the pointer of the seat that initiated the zoom.
Additionally, if there's no pointer in the first seat, starting a zoom
with the second seat will no longer crash weston.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
No longer call weston_output_update_zoom() when trying to zoom out
on an unzoomed output.
Add an assert() to make sure update_zoom is never called without an
active zoom.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Removing the screensaver had the accidental side effect of disabling
DPMS display shut down.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This fixes the case where an output isn't at y = 0, where the panel height
isn't correct for constraints.
It also kills a bug - moving a window with a mod-drag off the top of the
screen clamped earlier than it should.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The panel size calculation needs to take the output position into account
or it's only correct when the output is at 0, 0.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
get_output_work_area() now returns the absolute work area including the
output's offset.
This will make math a little simpler later when we use it to constrain
window moves.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Currently rotate is on the right mouse button and resize is on the middle.
As fantastic as rotating windows is, it's probably nicer to have resize on
the right button, especially for anyone with only 2 buttons.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This should be identical to the pointer in shset->seat.
A later patch prevents direct access to seat->pointer, using the
known valid pointer in the grab will be nicer than using the
getter functions that patch introduces.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't actually need the seat and we have to validate that the seat
has a pointer before making the call, so it's safer just to pass
the validated pointer.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't actually need the seat and we have to validate that the seat
has a pointer before making the call, so it's safer just to pass
the validated pointer.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't actually need the seat and we have to validate that the seat
has a pointer before making the call, so it's safer just to pass
the validated pointer.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It never actually needs the seat, and we always verify the touch pointer
before calling it, so let's just pass a touch pointer instead of having
an assumption that the seat's touch pointer has been verified.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Normally we need to check if a seat's [device_type]_count is > 0 before
we can use the associated pointer. However, in a binding you're
guaranteed that the seat has a device of that type. If we pass in
that type instead of the seat, it's obvious we don't have to test it.
The bindings can still get the seat pointer via whatever->seat if they
need it.
This is preparation for a follow up patch that prevents direct access
to seat->device_type pointers, and this will save us a few tests at
that point.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Make it a bool in both surface_move() and struct weston_move_grab
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Fix desktop-shell's activate() method to only restore the output
mode on the single output on which a shell surface gets activated.
This way toplevel fullscreen surfaces can mode-switch their output
via method WL_SHELL_SURFACE_FULLSCREEN_METHOD_DRIVER and that
temporary mode properly persists until the surface loses its
fullscreen status, but effects like window switching and exposay
still work in the expected way.
v2: Split into a separate patch from original patch
"Allow restore_output_mode() to work properly.",
as suggested by Derek Foreman.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Desktop shell demoted all fullscreen shell surfaces on all active
outputs of a multi-display setup whenever any shell surface was
activated anywhere. This made it impossible to have multiple
fullscreen windows on separate outputs active at the same
time, as creating or activating any shell surface would disable
fullscreen status for all existing fullscreen surfaces.
Make lower_fullscreen_layer() more selective, so on request it
only demotes fullscreen surfaces on a specified weston_output.
The activate() method for a specific surface will now only request
demotion of fullscreen surfaces on the target output of the activated
surface, but leave fullscreen surfaces on unrelated outputs alone.
Desktop wide acting functions like the window switcher or exposay
will still demote all fullscreen surfaces on all outputs to
implement their effect as before.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
We used to rely on the order in which the
weston_compositor::destroy_signal callbacks happened, to not access
freed memory. Don't know when, but this broke at least with ivi-shell,
which caused crashes in random places on compositor shutdown.
Valgrind found the following:
Invalid write of size 8
at 0xC2EDC69: unbind_input_panel (input-panel-ivi.c:340)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea360 is 208 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0D7: wl_list_remove (wayland-util.c:57)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea370 is 224 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0E7: wl_list_remove (wayland-util.c:58)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea368 is 216 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Looking at the first of these, unbind_input_panel() gets called when the
text-backend destroys its helper client which has bound to input_panel
interface. This happens after the shell's destroy_signal callback has
been called, so the shell has already been freed.
The other two errors come from
wl_list_remove(&input_panel_surface->link);
which has gone stale when the shell was destroyed
(shell->input_panel.surfaces list).
Rather than creating even more destroy listeners and hooking them up in
spaghetti, modify text-backend to not hook up to the compositor destroy
signal. Instead, make it the text_backend_init() callers' responsibility
to also call text_backend_destroy() appropriately, before the shell goes
away.
This fixed all the above Valgrind errors, and avoid a crash with
ivi-shell when exiting Weston.
Also using desktop-shell exhibited similar Valgrind errors which are
fixed by this patch, but those didn't happen to cause any crashes AFAIK.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
This is a follow-up for the patch that removed weston-screensaver. The
aim is to clean up shell.c a little by removing non-essential
components. Vanilla Weston desktop is only a demo, external projects are
encouraged to create user-friendly desktop environments.
The support for launching a screensaver client and the protocol bindings
are removed. With them, all related configuration options are removed,
and the manuals are updated accordingly.
The screensaver protocol definition is left in desktop-shell.xml for
posterity.
This does not affect Weston's or desktop-shells ability to put screens
to sleep after inactivity. The inactivity timer continues to operate as
before. Also screen locking is unaffected.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Removed multiple definitions of the MIN() macro from existing
locations and unified with a single definition. Updated sources
to use the shared version.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Using the parent '../' path component in #include statements makes
the codebase more rigid and is redundant due to proper -I use.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Whether a input method is used should be the responsibility
of the shell because some shells may not want to implement
an input method at all
Signed-off-by: Murray Calavera <murray.calavera@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Do not use a black blanket surface when the startup animation is
specified to be "none". This is the final fix needed to make the
screenshot test deterministic and independent of weston-desktop-shell.
Previously, the black surface would cover all outputs until
weston-desktop-shell signalled ready. Then, depending on the set
animation, either the black surface was immediately removed (none) or a
fade-in started (fade).
Now, when there is no black surface at all for "none", the compositor
will show garbage until weston-desktop-shell gets everything up. This
may be undesireable but works for tests. To have the old "none"
behaviour back, I would propose to add a new startup-animation value
"black" for it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
It's possible for more than one animation to be taking place on a view at
the same time. If one of those animations is the shell's fade out for
dying surfaces, its completion handler will trigger the surface destroy
signal, causing other animations on the animation list to remove themselves.
Since this removal occurs during the linked list walk, the compositor may
crash.
We move the actual surface destruction into an idle handler to avoid this.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Weston has sent the first 'resizing' configure event with width=height=0.
But resizing to that size doesn't make sense.
Instead, we now send the current width and height of the surface at the beginning
of resizing.
Signed-off-by: Ryo Munakata <ryomnktml@gmail.com>
Bob Ham
Giulio Camuffo
Jonas Ådahl
Peter Hutterer
Marek Chalupa
Derek Foreman
Ben Hummon
Mario Kleiner
Pekka Paalanen
Jon Cruz
Bryce Harrington
Murray Calavera
Michael Vetter
Ryo Munakata