When we introduced support for variable zpos, we did so by filtering the
list of acceptable planes and then creating a separate zpos-ordered
list. Now that the planes are already zpos-sorted in the backend list,
and we have more early filtering, we can replace this with a single
plane-list walk.
Signed-off-by: Daniel Stone <daniels@collabora.com>
For better or worse, cursor planes can only be used by uploaded SHM
buffers right now, so ignore them when we're calculating the acceptable
plane mask for client dmabufs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we're in renderer-only mode, we can only use the renderer and the
cursor plane. Don't even try to import client buffers as it makes no
sense.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we have a SHM buffer, it can only go into a cursor plane - and only
then if it's of the right format.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Each output is hardcoded to the use of a single 'special' (primary or
cursor) plane; make sure we don't try to steal them from other outputs
which might not be happy to discover that we've taken it off them.
Signed-off-by: Daniel Stone <daniels@collabora.com>
GBM is how we import all our client content into DRM FBs, so don't try
anything other than renderer-only without it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It's possible to write this with a few less twisty special cases. Tested
manually with a randomly-distributed input tree as well as manually
trying to hit special cases around first/last entries.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This ensures that users that previously set the option explicitly will also have
a chance to notice the deprecation.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
While the option is still available, this brings more attention to the
upcoming deprecation of weston-launch.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
weston-launch will be removed in a future release as this feature has
been offloaded to libseat and seatd-launch. Print an early deprecation
warning to give existing users time to migrate.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
It's invalid for a client to pass the compositor's supported version
directly to wl_registry_bind. For instance, under wlroots the client
will bind to wl_output version 4 and crash because it doesn't handle
the new "name" event.
Signed-off-by: Simon Ser <contact@emersion.fr>
Transforming the scanout damage by the zoom will result in rectangles
outside of the display, and some with negative co-ordinates. This makes
at least some drivers unhappy (tested on vmware), and the page flip fails,
and weston hangs indefinitely.
Clip the damage to the output so we don't fall down.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Rename the build option to "deprecated-backend-fbdev" so that a
previously configured build dir doesn't retain the old setting.
This is consistent with the existing "deprecated-wl-shell" option.
Make the option default to "false".
Print a warning when fbdev is force-enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
References: https://gitlab.freedesktop.org/wayland/weston/-/issues/581
The invariant is clearly documented in code comments, but the code
failed to ensure it in all cases. Fix it.
There is one very specific protocol sequence triggered by a development
version of the Wine Wayland driver when Chrome (win64 app) is switched
from window to fullscreen and then back by pressing F11 key. The switch
back triggered
weston: ../libweston/color.c:217: weston_paint_node_ensure_color_transform: Assertion 'it->surf_xform_valid == false' failed
For some reason, that specific protocol sequence causes
weston_compositor_build_view_list() to create a transient second view
for a sub-surface. In the Chrome traces, I have seen that happen twice
per run. The first time it works, the old view gets immediately
destroyed. The second time (during un-fullscreening) a new transient
view is create and then it fails the invariant check.
The fix is in weston_paint_node_create() which is supposed to ensure the
invariant. However, it went through the (new) view's paint node list,
which will not contain paint nodes from other views. In hindsight this
is an obvious bug, but perhaps all views having exactly one associated
surface each somehow confused the author. Since the invariant is about
surface+output, go through the surface's paint node list instead. That
list contains all the relevant paint nodes by definition.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/568
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Give a role and a label for the test desktop shell background surface.
This makes it easier reading scenegraph dumps and other surface related
debug messages in tests when you don't have to guess what this
mysterious "PID 0, surface ID 0" surface is.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
There is no weston_surface_set_transform_parent(), it is called
weston_view_set_transform_parent() now since
a7af70436b .
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Adds appid for all clients using the toolkit, flower, fullscreen, image,
resizor, scaler, smoke, stacking, subsurfaces, terminal,
touch-calibrator, transformed, etc.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Commit 0e4f097d broke opaque regions, and since then weston will waste
time rendering occluded areas.
I think this is because we're taking the intersection of the opaque
and scissor regions even when the scissor region isn't enabled.
An easy test is to turn on triangle fan debugging with the gl renderer,
then run weston-simple-damage and move another opaque application such as
weston-terminal over it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
With the recent changes, weston could be started as user service. This
adds some examples and howtos one might do that. Includes some simple
systemd unit files.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Leak found running drm-smoke-test with ASan.
Do not forget to destroy the SHM buffer by the end of the test.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This fixes a leak found running drm-smoke-test with ASan. Do not forget
to call prog_args_fini() when:
- skipping DRM-backend tests because we don't have
WESTON_TEST_SUITE_DRM_DEVICE set.
- we fail to acquire the lock needed to run DRM-backend tests.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Leak found running drm-smoke-test with ASan.
Do not forget to free the launcher before returning when we can't open
the launcher fd. Also, just set 'out = launcher' after all error paths,
otherwise we give the caller a stale pointer.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Leak found running drm-smoke-test with ASan.
Do not forget to free string specific_device in load_drm_backend().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
We need to remove our listener link before we free the structure
it's inside, or the signal list walk will try to dereference it.
Remove the improbable NULL check at the same time.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The code currently checked the return value of weston_config_section_get_bool()
which is incorrect. The return value of weston_config_section_get_bool() is
zero whether the config option is present or not, and it is non-zero in case
the config option is not present.
The code must check whether the config option is either true or false,
or in case the option is not present then default to false. Adjust the
code accordingly.
Reviewed-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Since commit 992ee045f1 we create a new surface when we update the cursor
image. This broke animated cursors by discarding any existing frame
callback used for timing, and moving the setup for frame callbacks to
after the commit on the pointer surface.
To fix this we need another surface commit for the frame callbacks, but
this alone is not enough to fix the regression, as a lingering kludge
intended to fix problems when reusing the pointer surface is no longer
working as intended.
Since we no longer re-use the same surface, we can delete the old surface
on pointer exit, along with any callbacks set on it. Then a frame callback
will be recreated naturally. This lets us remove the now broken kludge
from the past and restore animated cursor functionality.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We need to unlink this before freeing it since it's being called from
weston_signal_emit_mutable.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
weston_touch_destroy(), which is called from weston_seat_release(),
asserts that all its touch devices have been destroyed. The Wayland
backend currently destroys the touch devices ... immediately after
calling weston_seat_release().
Invert the ordering so that touch devices are destroyed first and we
don't trip over the assert.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When EGL initialization fails (failure to create a GLES3 or GLES2
context) we will end up calling gbm_device_destroy() twice, once
in init_egl() and once in the drm_backend_create() error path.
Given that we should also take care of properly destroying the gbm
device when we don't have any inputs for instance, mark the gbm device
as NULL to avoid calling gbm_device_destroy() once more when destroying
the DRM-backend.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As mesa includes gbm_bo_get_fd_for_plane() from 21.1.0 version onwards,
build the dma-buf feedback client only after that. This should provide
some sanity for package maintainers, as this would need pulling a
rather newer mesa version to build it (which might not be available).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
When setting the window as opaque or fullscreen (which creates an opaque
region) make it so we don't have any alpha pixels set.
This was mistakenly dropped from a previous patch series update to
simple-egl.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Nothing special, but avoids hitting the warning about
terminating/finishing a layer with views on it.
Fixes#509.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This properly takes care of removing any of the views being added into
different layers upon shell destruction. Aggregates the shell_surface
destruction into one place to make things much more clearer. Keep the
animation part only the weston_desktop_surface destruction rather than
doing it at shutdown.
Fixes#509.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Replaces potential corruption signal emit call sites with the more safer
weston_signal_emit_mutable().
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This simulates an output removal which should trigger a crash when
the compositor is shutdown abruptly by having a view with a listener installed
on its output_destroy signal.
This patch assumes that weston_compositor_remove_output() has already
been amended to use the more safer version for triggering signal
emission.
As both shells use this construct it should catch any potential signal
corruption.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This uses the more safer version of signal emission to avoid a potential
crash when the output is destroyed that will follow a surface/view
destruction for which it has a listener attached (to the output_destroy
signal).
Fixes: #734
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This avoids crashes due to removal of notification listeners from within
invocations of other listener callbacks in the same signal emission.
Fixes: #415
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Daniel Stone
Simon Ser
Kenny Levinsen
Derek Foreman
Pekka Paalanen
Marius Vlad
Leandro Ribeiro
Marek Vasut
Alexandros Frantzis