Ensure that the integer type used in expressions involving
multiplication with NSEC_PER_SEC is large enough to avoid overflows on
32-bit systems. In the expressions fixed by this patch a 64-bit type
(long long) is required.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This test isn't particularly useful when the compositor doesn't support
drag and drop - so bail if we fail to create a data source.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
display_create_data_source() can return NULL when there's no data device
manager present. Instead of carrying on blindly, test its return value.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This now prints each (format, modifier) tuple, to show which ones the
compositor sends to its clients. It is only implemented for version 3+,
since I didn’t have any compositor implementing previous versions, and
the old `format` event is deprecated anyway.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Without this attribute, the test macros were making Weston fail to
build with LTO enabled.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Tested-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is a preparatory patch for the next one.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
zwp_linux_dmabuf_v1 allows clients to pass an explicit pitch for each
plane, but wl_shm only takes a single pitch parameter; the pitch for
secondary planes must be inferred.
Multi-plane sub-sampled textures have partial width/height, e.g.
YUV420/I420 has a full-size Y plane, followed by a half-width/height U
plane, and a half-width/height V plane.
GStreamer's waylandsink - the only user of wl_shm YUV formats - expects
the implementation to follow the example of Xv and implicitly divide the
pitch for secondary planes by the subsampling factor. gl-renderer was
not doing this, and instead just using the (larger) stride provided by
the client for all planes in the buffer.
Fix gl-renderer to divide pitch by the subsampling factor when uploading
from subsampled SHM buffers into GL textures, also dividing co-ordinates
when doing offset partial uploads.
Tested with:
$ gst-launch-1.0 videotestsrc ! waylandsink
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Tested-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Reviewed-by: Arnaud Vrac <avrac@freebox.fr>
Acked-by: Vincent ABRIOU <vincent.abriou@st.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fixes: fdeefe4241 ("gl-renderer: add support of WL_SHM_FORMAT_YUV420")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103063
If the --click-to-show option is specified, clicking an input field will toggle
the input panel visiblity
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Tested-by: Silvan Jegen <s.jegen@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
Previously, the hide_input_panel and show_input_panel messages for the text
input protocol were limited to specific cases, such as showing the panel on
activation, or making the panel visible after activation. Now, clients are
allowed to toggle the panel visiblity at will as long as they are the currently
active client
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Tested-by: Silvan Jegen <s.jegen@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
Logind has been long supported as means to launch Weston without
weston-launch. It's good to note it in the manual.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Stop suggesting to run Weston as root, it is only meant for debugging.
Instead, mention the two supported ways to run Weston on DRM and fbdev:
weston-launch helper and logind service.
Cc: "Ucan, Emre (ADITG/ESB)" <eucan@de.adit-jv.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: added forgotten "using" word.]
Explain that -u requires root and -t requires -u. Most importantly,
document in what format does -t expect the tty to be given.
It has been confusing, because Weston's --tty option takes an integer,
weston-launch takes a full device path.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Fix an issue introduced in:
commit ab4999492c
Author: Kristian Høgsberg <krh@bitplanet.net>
Date: Fri Jul 19 21:26:24 2013 -0700
weston-launch: Drop sleep_fork option
where the option string accidentally became "t::". That causes
$ weston-lauch -t /dev/tty4
to be parsed incorrectly, as if -t option had no argument and the tty
path gets passed to weston which errors out because of it.
This patch fixes the above to work as expected.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
setup_tty() function uses the tty argument for choosing the tty/VT only
if wl->new_user (the -u option) is given. If the tty option is given
without -u, it will only be used for misleading error messages.
To make it clear to the user that -t without -u does not work the way
one might think, let weston-launch exit with an error in that case.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
When you need to start Weston via weston-launch, systemd unit, or any
other runner, it is annoying to try to get in with a debugger,
especially if the thing you are interested in happens at start-up. To
make it easy, a new option is introduced.
The new option, implemented both as a command line option and a
weston.ini option, raises SIGSTOP early in the start-up, before the
weston_compositor has been created. This allows one to attach a debugger
at a known point in execution, and resume execution with SIGCONT.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Ian Ray <ian.ray@ge.com>
It is useful to print the backtrace regardless of whether we have a
compositor and a backend initialized yet. Move catch_signals() to the
earliest point in main() and protect the SEGV handler from dereferencing
NULL when we don't yet have a compositor or a backend.
The SEGV handler uses weston_log(), so cannot move catch_signals() any
earlier.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Change weston_compositor_get_time to return the current compositor time
as a struct timespec. Also, use clock_gettime (with CLOCK_REALTIME) to
get the time, since it's equivalent to the currently used gettimeofday
call, but returns the data directly in a struct timespec.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to touch motion events to use struct timespec to
represent time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to touch up events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to touch down events to use struct timespec to
represent time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to key events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to axis events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to button events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to motion events to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Store the output presentation timestamp as struct timespec.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Change code related to animations to use struct timespec to represent
time.
This commit is part of a larger effort to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This bumps the libweston major version due to breakage in the animation
ABI. The commits following this one break more ABI in other parts.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add helper functions to make it easy and less error-prone to convert
between values in various time units (nsec, usec, msec) and struct
timespec. These helpers are going to be used in the upcoming commits to
transition the Weston codebase to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a helper function to check if a struct timespec is zero. This helper
will be used in the upcoming commits to transition the Weston codebase
to struct timespec.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix the code to use the correct bitwise AND operator '&', instead of the
currently used logical AND operator '&&', to check the value of a bit
flag in a bit mask.
This problem was reported as a warning when building with clang.
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
-uninstalled.pc files are a pkg-config facility for working with
uninstalled libraries.
With pkg-config, foo-uninstalled.pc overrides foo.pc. foo-uninstalled.pc
should never be installed, and will be generated with references to the
build directory.
If you set up your environment so pkg-config looks for .pc files in your
build directories, you can use this to build and link against libraries
you haven't installed with "make install".
This can save time and space over installing with a prefix.
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
It appears that wayland_shm_buffer::damage is in the global coordinate
space. Therefore initializing it to width x height at 0,0 is not correct
for any output not positioned at 0,0. That is, all outputs after the
first one get it wrong.
Initialize it from the output region, which is in the global coordinate
space.
While at it, add a comment to note that damage is in global coordinate
space. As I can see, this was the last confusion about it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Damage coordinates are in global coordinate space, and they need to
be translated to local coordinate space so multiple outputs can work.
This path now matches the similar path in the X11 backend.
This patch fixes the appearance of multiple windows in the parent
compositor. Previously, all windows except the one with nested output
position 0,0 would have their damage for the parent wl_surface always
fall outside of the wl_surface, save the decorations which were handled
separately. If the parent compositor was Weston/GL, this would lead to
the output area remaining black as partial GL texture uploads would
practically never update the texture. If the parent compositor was
Weston/pixman, the parent windows would not update on screen unless
something else caused the area to be repainted.
[Pekka: adjusted commit message]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Clarify the error message to explicitly say one was trying to connect to
a parent Wayland compositor. This hopefully is a good enough hint on
what using the wayland-backend is trying to do.
Add the command line display option value and WAYLAND_DISPLAY values for
good measure. WAYLAND_SOCKET is not shown as libwayland-client removes
it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
The set_windowed and set_fullscreen functions are only useful on a
desktop shell, and never called on fullscreen-shell.
Remove the confusing dead code, and ensure we notice if these functions
get called in the wrong environment.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
To be more symmetric with wayland_output_set_fullscreen(), implement the
xdg-shell path in wayland_output_set_windowed(). This should make it
possible to use the fullscreen key binding to toggle between a floating
window and fullscreen also under xdg-shell.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
I could not find anywhere where struct parent_output was freed, so
apparently we were leaking it.
Check against wayland_backend_register_output() and add the missing
clean-up: removal from the parent output list, and free().
registry_handle_global_remove() also needs fixing to use a safer loop,
because now we are actually removing the list item.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
The wayland-backend with --sprawl is one way to trigger
wayland_output_create_for_parent_output(), which intends to find a mode
from the parent mode list and use it. Calling wayland_output_set_size()
initialized an embedded struct weston_mode and inserts that into the
mode list. Then the assignment output->mode = *mode; corrupts the
mode_list by overwriting the link entry. This leads to an endless loop
in bind_output() in compositor.c.
Fix this by manually doing the setup that wayland_output_set_size() did
and do not call it.
As a side effect, it now relays the parent compositor's physical output
size to our own clients. It no longer smashes the refresh rate either.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
This member is only ever set and never read, therefore it is dead.
Delete dead code.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Calling wl_display_roundtrip() from within a Wayland event handler means
we will re-enter event dispatch, that is, it will lead to recursive
dispatch. Even if libwayland-client was safe, this would lead to
unexpected code paths: the first event handler function has not returned
when other event handler functions may get called. In this particular
case it maybe didn't hurt, but it's still a fragile pattern to use.
Replace the wl_display_roundtrip() with a manual sync callback to do the
work.
This does not break the wayland-backend initialization sequence, because
sprawl_across_outputs was set only after the roundtrip to ensure
wl_registry globals have been received so the code would not have been
hit anyway, and weston_backend_init() also has a second roundtrip that
ensures the per wl_output events have been received before continuing.
For wayland-backend output hotplug the change is insignificant because
it will only delay the output creation a bit, and the parent outputs are
not processed anywhere in between.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Surprisingly, WESTON_OPTION_BOOLEAN uses the type int32_t, not bool.
Passing in a pointer bool does not end well. Fix this to pass in
pointers as parse_options() expects.
This fixes a bug where 'weston --use-pixman --sprawl' would work but
'weston --sprawl --use-pixman' would ignore the --sprawl option.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
If a surface is in state A, and we just sent a configure for state B,
setting back state A would be ignored, because state B has not been
committed yet.
Now, we check against the latest configured state (which is current
state if configure list is empty).
Reported on wlroots https://github.com/swaywm/wlroots/pull/280
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This patch fixes the wayland backend to not use two different
presentation methods when running on fullscreen-shell.
See also: https://patchwork.freedesktop.org/patch/114534/
v2:
- Add missing wayland_output_resize_surface() call
- Start repaint loop after initial frame has been drawn
v3:
- Redraw the initial frame if present for mode fails
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93514
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: Fix use after free spotted by Daniel Stone
Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The opaque region is a few pixels off due to the rounded corners
of the frame decorations, and, therefore, the input region
matches the window's geometry more closely.
Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a test environment variable to allow disabling universal planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If the user has passed an INVALID modifier, it's because there is no
applicable modifier, and the buffer layout should be determined by a
magic side-channel call (e.g. bo_get_tiling). If the modifier is
INVALID, don't try to pass it through to EGL, but just drop it.
On the other hand, if a modifier _is_ explicitly specified and we don't
have the modifiers extension, then refuse to import the buffer.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The timer was never removed anywhere. Remove it in disable() to match
what happens in enable().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
This is a more logical name for the function, matching the pattern used
in other backends and the hook names.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
If we pass the base->enabled test, then the renderer output is
guaranteed to be there, so we can just destroy it.
Destroying it before unmap makes the sequence match better the enable
path.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Rename fbdev_frame_buffer_destroy() to fbdev_frame_buffer_unmap()
because that is what it does. Adding the destruction of hw_surface in it
makes it the perfect counterpart to fbdev_frame_buffer_map() which
simplifies the code.
fbdev_frame_buffer_map() can no longer call that, so just open-code the
munmap() there. It is an error path, we don't really care about
failures in an error path.
The error path of fbdev_output_enable() is converted to call
buffer_unmap() since that is exactly what it did.
fbdev_output_disable() became redundant, being identical to
fbdev_frame_buffer_unmap().
Invariant: output->hw_surface cannot be non-NULL without output->fb
being non-NULL. hw_surface wraps the mmapped memory so cannot exist
without the mmap.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by Daniel Stone <daniels@collabora.com>
Alexandros Frantzis
Derek Foreman
Emmanuel Gil Peyrot
Daniel Stone
Joshua Watt
Pekka Paalanen
Reynaldo H. Verdejo Pinochet
Armin Krezović
Quentin Glidic
Sergi Granell