[With hexadecimal color values now handled via their own routine,
re-introduce the negative unsigned numbers fix.]
strtoul() has a side effect that when given a string representing a
negative number, it treats it as a high value hexadecimal. IOW,
strtoul("-42", &val) sets val to 0xffffffd6. This could potentially
result in unintended surprise behaviors.
Catch this by using strtol() and then manually check for the negative
value. This logic is modelled after Wayland's strtouint().
Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX]. The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.
Also add a test case for negative numbers that catches this error
condition.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Previously weston_config_section_get_uint was serving dual purpose for
parsing both unsigned decimal integer values (ids, counts, seconds,
etc.) and hexadecimal values (colors), by relying on strtoul's
auto-detection mechanism.
However, this usage is unable to catch certain kinds of error
conditions, such as specifying a negative number where an unsigned
should be used. And for colors in particular, it would misparse hex
values if the leading 0x was omitted. E.g. "background-color=99999999"
would render a near-black background (effectively 0x05f5e0ff) instead of
medium grey, and "background-color=ffffffff" would be treated as an
error rather than white. "background-color=0x01234567",
"background-color=01234567", and "background-color=1234567" each
resulted in the value being parsed as hexadecimal, octal, and decimal
respectively, resulting in colors 0x01234567, 0x00053977, and 0x0012d687
being displayed.
This new routine forces hexadecimal to be used in all cases when parsing
color values, so "0x01234567" and "01234567" result in the same color
value, "99999999" is grey, and "ffffffff" is white. It also requires
exactly 8 or 10 digits (other lengths likely indicate typos), or the
value "0" (black).
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
In order to test warping when pointer confinemen region changes, add
key binding to the maximized state without using the mouse.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
By passing --complex-confine-region confine will draw an area looking
like a strange H in half transparent gray. This region will act as the
confine region when pointer confinement is activated (by right clicking).
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
We can use this to test more complex confine regions.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Clear the white lines that is drawn by pointer motions. It makes it
easier to debug pointer movements as one won't need to restart confine
just to get a clean plate.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch adds support for when the resulting pointer confinement region
is not a rectangle.
Support for this is implemented by converting the rectangles of the
region into the regions outer border. Pointer motions are then clamped
to these borders in order to not escape the confinement region.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Use pointer confinement to make the line drawing not go outside the
drawing area. It is toggled with the letf pointer button.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The new confine client will be used to demonstrate pointer confinement.
It is so far identical to clickdot except that it doesn't respond to
clicks.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Resizes the window using pointer locking when holding the left pointer
button down. The pointer lock cursor position hint is used to warp the
pointer to the same position relative to the bottom right corner.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch implements the wp_pointer_constraints protocol used for
locking or confining a pointer. It consists of a new global object with
two requests; one for locking the surface to a position, one for
confining the pointer to a given region.
In this patch, only the locking part is fully implemented as in
specified in the protocol, while confinement is only implemented for
when the union of the passed region and the input region of the confined
surface is a single rectangle.
Note that the pointer constraints protocol is still unstable and as
such has the unstable protocol naming conventions applied.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniels@collabora.com>
A wp_relative_pointer object is an extension to the wl_pointer interface
only used for emitting relative pointer events. It will only emit events
when the parent pointer has focus.
To get a relative pointer object, use the get_relative_pointer request
of the global wp_relative_pointer_manager object.
The relative pointer protocol is currently an unstable protocol, so
unstable protocol naming conventions has been applied.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Provide timestamps with microsecond granularity if the backend can
provide it. Backends that can't should set it to 0.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Adds a weston_view_activate() that can be passed an additional active
flag WESTON_ACTIVATE_CLICKED, that the shell passes when a view was
activated by clicking.
This allows shell-independent components implement heuristics depending
on how a view was activated.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Although it currently only has one available flag, but that'll change.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
In preparation for further refactoring.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Activate a view even though it effectively may already be active.
Without this, in later patches, it won't be possibe to track what view
was activated by clicking last, as a view which surface already had
keyboard focus, won't be activated.
To keep avoiding sending xdg_surface.configure events, only change the
keyboard focus if the focus actually changed.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
compositor/main.c depends on the header, while the dependency isn't
specified. Thus depending on the order of how things are build we could
get a build failure.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Otherwise we'll pick up the stale (in-tree) generated source(s) over the
fresh (out-of-tree) ones.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Will allow us to consolidate the multiple definitions through the tree.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
... prefixing it with a "weston_". This way we can reuse it across the
board, instead of the current strstr. The latter of which can give us
false positives, thus it will be resolved with next commit(s).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The header contains a set of extension check (helpers), which do not
provide any compositor related functionality and are not required for
using libweston.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Required by the bool type, used through the header.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
A more complete alternative is already provided by the weston-egl-ext.h
header. The latter of which we already include.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We provide a (workaround) definition in weston-egl-ext.h, thus we don't
need any guards.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
... and use it from simple-egl and gl-renderer.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Rather than introducing a local copy of the
EGL_WL_create_wayland_buffer_from_image (re)definition, just use the
local header.
This also gives us access to EGL_WL_bind_wayland_display which is also
used in the client, yet the C file is missing a fall-back definition.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The reduction in range limits does have an effect for color values,
which are expressed as hexadecimal values from 0x00000000 to
0xFFFFFFFF. By limiting the range to INT_MAX, color values of
0x80000000 and up are in fact lost.
This reverts commit 6351fb08c2.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Yong Bakos <ybakos@humanoriented.com>
The third arg to strtol() specifies the base to assume for the number.
When 0 is passed, as is currently done in option-parser.c, hexadecimal
and octal numbers are permitted and automatically detected and
converted.
This change is an expansion of f6051cbab8
to cover the remaining strtol() calls in Weston, where the routine is
being used to read fds and pids - which are always expressed in base-10.
It also changes the calls in config-parser, used by
weston_config_section_get_int(), which in turn is being used to read
scales, sizes, times, rates, and delays; these are all expressed in
base-10 numbers only.
The benefit of limiting this to base-10 is to eliminate surprises when
parsing numbers from the command line. Also, by making the code
consistent with other usages of strtol, it may make it possible to
factor out the common code in the future.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
strtoul() has a side effect that when given a string representing a
negative number, it returns a negated version as the value, and does not
flag an error. IOW, strtoul("-42", &val) sets val to 42. This could
potentially result in unintended surprise behaviors, such as if one were
to inadvertantly set a config param to -1 expecting that to disable it,
but with the result of setting the param to 1 instead.
Catch this by using strtol() and then manually check for the negative
value. This logic is modelled after Wayland's strtouint().
Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX]. The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.
Also add a test case for negative numbers that catches this error
condition.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Improve error checking for situations like RDP_FD=42foo, or where the
provided number is out of range.
Suggestion by Yong Bakos.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Yong Bakos
Bryce Harrington
Jonas Ådahl
Emil Velikov