Trying to do HDR with XRGB8888 is a bit like using RGB565 on SDR: you
get visible color quantization and banding in gradients (without dithering
which Weston does not implement yet, and might not work too well for HDR
anyway).
Therefore, on any HDR mode, default output framebuffer format to 10 bpc
instead of 8 bpc.
Ideally we'd also optionally try 16F or 16 bpc formats, but automatic
fallbacks for those are more complicated to arrange. You can still
configure 16F or 16 bpc manually.
This patch also moves the default format setting from
drm_output_set_gbm_format() to drm_output_enable(), because setting the
default now requires eotf_mode. Frontends may call set_gbm_format()
first and set eotf_mode next. This does create an awkward situation for
outputs that a frontend disables and re-enables. This patch here makes
sure that the old output configuration remains, but changing eotf_mode
may not change the default format. One needs to call
set_gbm_format(NULL) to re-evaluate the default format. Resetting the
format on drm_output_deinit() would lose the current setting.
DRM_FORMAT_INVALID was introduced in libdrm 2.4.95 which we already
hard-depend on.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Program the connector property HDR_OUTPUT_METADATA based on the EOTF
mode of the output.
For now, this changes only the EOTF. The colorimetry and luminance are
left undefined, to be filled in by later patches. This should still be
enough to put a video sink into HDR mode, albeit the response is
probably unknown.
drm_output keeps track of the currently existing blob id. If the blob
contents need to be re-created, this blob would be destroyed and the
field set to zero. In this patch, there is no provision for runtime
changing of HDR metadata, so there is no code doing that.
Destroying the blob at arbitrary times is not a problem, because the
kernel keeps a reference to the data as long as the blob id remains with
KMS.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Check whether HDR_OUTPUT_METADATA property exists on a KMS connector. If
yes, pretend that EDID claims support for all EOTF modes and update the
head supported EOTFs mask accordingly. If not, then only SDR is
possible.
Parsing EDID to take monitor capabilities into account is left for
later.
HDR mode cannot be set without HDR_OUTPUT_METADATA.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These are fallback definitions in case libdrm is not new enough.
They are copied from libdrm 2.4.107.
struct hdr_output_metadata defines the contents of the blob to be used
with the connector property "HDR_OUTPUT_METADATA".
This is needed for programming a HDR mode in KMS.
This headers need to be excluded from Doxygen, because Doxygen chokes on
the kerneldoc markup.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
A reminder that this variable needs to be taken into account when
crafting color transformations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The no-op color manager will not support any other EOTF mode than SDR.
Other modes would require it to set up color transformations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The headless backend does not display to anything, so it doesn't care
what the EOTF mode is. To allow testing compositor internal behavior,
claim to support all EOTF modes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is the switch to turn HDR mode on.
The values in the enumeration come straight from CTA-861-G standard.
Monitors advertise support for some of the HDR modes in their EDID, and
I am not aware of any other way to detect if a HDR mode actually works
or not. Different monitors may support different and multiple modes.
Different modes may look different. Therefore the high-level choice of
how to drive a HDR video sink is left for the Weston frontend to decide.
All the details like what HDR metadata to use are left for the color
manager.
This commit adds the libweston API for backends to advertise support and
for frontends to choose a mode. Backend and frontend implementations
follow in other commits.
The frontend API does not limit the EOTF mode to the supported ones to
allow experimentation and overriding EDID.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Rather than setting the fullscreen/maximized before initial
wl_surface.commit, make it part of the initial window state.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Rather than creating the wl_egl_window at the same time as wl_surface,
do it after we get the first configure event.
With it, we also defer eglMakeCurrent() as according to the spec, the
first time a OpenGL or OpenGL ES context is made current, the viewport
and scissor dimensions are set to the size of the draw surface.
This is particulary important when attempting to start simple-egl either
as fullscreen or as maximized, as not doing so will either incorrectly
commit a buffer with the original dimensions, and later on to resize to
the correct dimensions (which is the case for fullscreen), or it will
terminate the wayland connection abruptly due to xdg-shell protocol
violation, with a mismatch for the client's geometry (the case for
maximized).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
display->wm_base is checked right after handling registry object, and
with it the globals, so there's no to perform and additional check for
xwm_base.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
A previous patch modified this for fullscreen, but missed out the
maximized state. As we check the geometry rather than the buffer
dimensions use the same terminology.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Just like start as fullscreen, let us add a start as maximized as well.
It tests out the maximized state and with clients geometry checks.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Even if the weston_buffer_reference is still alive in situations like
when we have closing animations, the underyling buffer (wl_shm_buffer)
is no longer available. Call the appropriate destroy handler to
invalidate the pixman image and avoid touch the shm_buffer.
Fixes: #613
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Synchronize events carry keylock status, so we should update it.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
When RDP indicates that a Japanese keyboard layout is used without
a Japanese 106/109 keyboard (keyboard type 7), use the "us" layout,
since the "jp" layout in xkb expects the Japanese 106/109 keyboard
layout.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Korean keyboards are keyboard type 8:
https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-getkeyboardtype
While type 8 is not explicitly mentioned in the RDP documentation,
it can be sent over the wire. Let's support the variants we can.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
This code will eventually be used by RAIL as well, so let's
split it out now.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Use the common abnt2 variant, instead of the niche nativo one.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Exposay was done as a showcase for what we could do with Weston and an
efficient compositing pipeline. This was mostly with the old
vendor-specific Raspberry Pi backend which could actually process that
many surfaces bypassing the GPU.
Given enough bitrot, Exposay is now pretty exemplary as what _not_ to do
in a Weston shell - particularly the way it manipulates existing
weston_views rather than create its own non-destructive stack.
As it's annoying technical debt, a terrible example to others, and not a
very compelling showcase in 2022, just delete it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We move this into a function for when we add horizontal wheel support
later.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We currently hardcode a 60Hz update rate for the rdp backend.
In some cases it may be useful to override this to increase the rate
for a faster monitor, or to decrease it to reduce network traffic.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Instead of hard coding a 16ms refresh interval, use the refresh rate
from the current mode to determine when the next frame should be.
Currently, we still hard code the refresh rate, so this will end up
with roughly the same value we've been using, but in the future
we'll allow setting it via command line.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We already have a way for a single RDP client connection to be
passed from a parent process to a child using a combination
of environment variable (RDP_FD) and env var (--env-socket)
This patch allows a bound socket fd (as opposed to a client
connection) to be established in a parent process and provided
to the rdp backend. WSLg uses this to set up an AF_VSOCK
socket for communication between a Windows RDP client and a
weston compositor running under a hypervisor.
Co-authored-by: Hideyuki Nagase <hideyukn@microsoft.com>
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
These events carry the 4th and 5th mouse buttons, so
we should propagate them. We also need to use pointer
frames to ensure the buttons are properly paired with
the pointer co-ordinates.
Unfortunately, there is no way in RDP to determine if
a mouse event and an extended mouse event should be in
the same pointer frame, so this is the best we can do.
We also enable extended mouse events so they'll be used.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Print a message when presentation switches to/from zero-copy mode.
This makes it easier to understand whether the compositor DMA-BUF
feedback was effective.
Signed-off-by: Simon Ser <contact@emersion.fr>
This fixes an issue when running simple-dmabuf-feedback:
"wl_display@1: error 1: invalid arguments for wl_surface@3.attach".
As we are not using create_immed request from zwp_linux_dmabuf_v1, we
can't start to use a dma-buf buffer before we process compositor's event
telling us that the creation succeeded.
This was causing problems in the following scenario:
1. buffer is marked to be recreated (because of dma-buf feedback);
2. in buffer_release() event, we destroy the buffer and recreate it;
3. after we recreate it, roundtrip is not called, as we don't want to
block during the drawing loop;
4. buffer status is not being properly tracked, so we are trying to
use a buffer before receiving the event from the compositor telling
us that the creation succeeded.
To fix this, this patch improves buffer status tracking. Now we only
pick a buffer in the drawing loop when it is available. Also, if we have
no buffers available we perform a roundtrip and try again, as we may
have recreated all of them but still didn't have the chance to process
compositor's events telling us that creation succeeded.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This is a minor re-work of how we de-activate and activate the surfaces
in desktop-shell. As activate() is being used for handling keyboard
input events, this basically rectifies that such that activation
happens only if the passed surface is different from the currently
focused surface.
Fixes: #593
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rather than punching through to set the surface as a solid colour,
attach an actual weston_buffer to it instead.
This becomes the first user of attaching non-client-generated buffers
to a weston_surface. As a result, it is necessary to introduce a
function which will allow compositors and shells to attach a buffer to a
surface. weston_surface_attach_solid() is therefore introduced as a
special-purpose helper which will attach a solid buffer to a
weston_surface.
It is not intended as a general-purpose mechanism to allow compositors
to attach client-generated buffers to surfaces, as doing so would have
unknown effects on this core part of the compositor itself.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we're checking to see if a view is suitable to go on a plane, check
for (and reject) solid-colour buffers.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The Pixman renderer keeps its own reference to buffers when attached to
surfaces, through its surface state: just use that instead.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Refactor the buffer-type check slightly so we can handle solid-color
buffers, which we do exactly nothing with.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently solid-colour displays (e.g. the background for fullscreen
views) is implemented by a special-case weston_surface which has no
buffer attached, with a special punch-through renderer callback to set
the colour.
Replace this with a weston_buffer type explicitly specifying the solid
colour, which helps us eliminate yet more special cases in renderers and
backends.
This is not handled yet in any renderer or backend, however it is also
not used by anything yet. Following commits add support to the renderers
and backends.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When the renderer/backend indicate that they do not need a surface's
buffer content to be preserved, most often because they have copied it,
simply downgrade the buffer reference to 'will not access', rather than
drop the buffer reference altogether.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In the original conception, a weston_buffer_reference indicated that the
underlying contents of the wl_buffer would or could be accessed, so
wl_buffer.release must not be sent until the last reference was
released, as the compositor may still use it.
This meant that renderers or backends which copied the buffer content -
such as the GL renderer with SHM buffers - could only send a buffer
release event to the client by 'losing' the buffer reference altogether.
The main side effect is that `weston-debug scene-graph` could not show
any information at all about SHM buffers when using the GL renderer, but
it also meant that renderers and backends grew increasingly exotic
structures to cache information about the buffer.
Now that we have an additional buffer-reference mode (still referring to
the weston_buffer/wl_buffer, but not going to access its content), we
can allow the weston_buffer_reference and weston_buffer to live as long
as the buffer itself, even if we do send a release event.
This will enable a bunch of backend and renderer deduplication, as well
as finally making scene-graph more useful.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add a mode argument to weston_buffer_reference which indicates whether a
buffer's storage may/will be accessed, or whether the underlying storage
will no longer be accessed, e.g. because it has been copied. This will
be used to retain a pointer to the weston_buffer whilst being able to
send a release event to the client.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Keep the weston_buffer alive for as long as at least one of the
underlying wl_buffer or a backend usage exists.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make sure we don't die if we're asked to flush the damage on a SHM
buffer which has subsequently been destroyed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Pekka Paalanen
Marius Vlad
Hideyuki Nagase
Daniel Stone
Derek Foreman
Brenton DeGeer
Simon Ser
Leandro Ribeiro