It's been unused since the legacy (non-libinput) input backends have
been removed.
Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The GCC address sanitizer overrides dlopen and dlclose, so the configure
test does not detect libdl as a needed dependency for linking. It is
still needed though, as dlsym is not exported by the sanitizer. The
result is that linking fails in the end.
Fix this by checking for dlsym instead of dlopen.
This can be reproduced by configuring the build with:
CFLAGS="-fsanitize=address -fsanitize=undefined"
LDFLAGS="-fsanitize=address -fsanitize=undefined"
Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Without this weston crashes when a client using xdg-shell-v5 is run.
Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
xdg_shell requires this information to be shared with the client in
order to conform with the specification.
The code to forward this to the client by way of a configure() event
is already in place and works fine, it was just never being used until
now.
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
commit 749637a8a3
introduced this feature, but the break is outside of any conditional
so only the first item in the list is ever tested.
If a client skips a few configures and then acks the most recent
it's still operating within spec, so the break should only occur
when a match is found.
This version also adds a break after we miss the target, as a tiny
optimization (the list will be cleaned up on disconnect anyway),
as it makes the code no more difficult to read or maintain.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This is easily noticed as a leaked fd on every VC switch.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix a regression with VT-switching away from Weston and then back
causing drmModePageFlip() to fail with ENOSPC or EINVAL, leaving one or
more outputs not updated. The regression appeared in
47224cc9312fef05c1a523ea0da0a1aae66f100d:
compositor-drm: Delete drm_backend_set_modes
Fix it by forcing a drmModeSetCrtc() on all outputs both initially
created and after VT-switch in.
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: moved state_invalid=true from create_output_for_connector() to
drm_output_enable()
Reviewed-by: Daniel Stone <daniels@collabora.com>
We still need to close fds passed to us - or we leak quite a few fds
on VC switch.
Regression, originally fixed in 8f5acc2f3a
and re-broken in commit 72dea06d79
but only for the logind launcher.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Shell surfaces may have a geometry that is different to the size of
their main surface, e.g. due to subcompositing.
In states where size is strictly enforced (fullscreen and maximized),
the size that the compositor wants must be checked against the window
geometry and not just the main surface size.
Fix by calling weston_desktop_surface_get_geometry and using that size
instead of main surface size.
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
The focused surface is used for determining whether shell surfaces
are activated. They should also be considered activated when a
subsurface has focus. Inserting a call to
weston_surface_get_main_surface fixes this.
seat->focused_surface is only used for shell_surface keyboard focus
tracking.
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This is a simple wrapper for casting the user data of a wl_resource into
a struct weston_output pointer. Using the wrapper clearly marks all the
places where a wl_output protocol object is used.
Replace ALL wl_output related calls to wl_resource_get_user_data() with
a call to weston_output_from_resource().
v2: add type assert in weston_output_from_resource().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
It's a little awkward to try to keep the weston_output::region and
weston_output::previous_damage allocate exactly only when the output is
enabled. There was also a leak: weston_output_move() was calling
weston_output_init_geometry() on an already allocated regions without
fini in between.
Fix both issues by allocating the regions in weston_output_init(),
always fini/init'ing them in weston_output_init_geometry(), and fini'ing
for good in weston_output_destroy().
This nicely gets rid of weston_output_enable_undo() so I do not need to
try to figure out what to do with it later.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Move the wl_output global management into weston_compositor_add_output()
and weston_compositor_remove_output().
If weston_output_enable() fails, there is no need to clean up the global
and the clients will not see a wl_output come and go.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Move the output id management into weston_compositor_add_output() and
weston_compositor_remove_output(). This is a more logical place, and
works towards assimilating weston_output_enable_undo().
The output id is no longer available to the backend enable() vfuncs, but
it was not used there to begin with.
v2: moved assert earlier in weston_compositor_add_output()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Enabling an already enabled output is an error, at least with the
current implementation.
However, disabling an output that has not been enabled is ok.
Cope with the first and document the second.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
It was ambiguous what this flag meant - it did not mean whether the
backend is considering this output to be enabled, because
weston_output_destroy() unsets it while deliberately not calling the
backend disable() vfunc.
Perhaps the most clear definition is with respect to the output's
assignment in the pending vs. enabled output lists. There is also a whole
bunch of variables that are allocated only when enabled is true.
Since the flag is related to the list membership, set and clear the flag
only when manipulating the lists.
Assert that weston_compositor_add_output() and
weston_compositor_remove_output() are not called in a wrong state.
v2:
- talk about "list of enabled outputs"
- clear 'enabled' in weston_compositor_remove_output() earlier
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
weston_compositor_add_pending_output() is the point through which all
backends must go when creating a new output. The enable and disable
vfuns are essential for anything to be done with the output, so it makes
sense to check them here, rather than when actually enabling or
disabling.
Particularly the disable vfunc is rarely called, so this gets the check
better excercised.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Only used internally in core. Needs to happen automatically when
something changes, so there should no need to call it from outside.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Only used by weston_output_enable().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Document two more functions of the weston_output API.
Exported functions marked internal are meant for backends only.
Exported functions not marked internal are meant for libweston users.
v2: talk about "list of enabled outputs".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
A weston_output available to the compositor should always be either in
the list of pending outputs or the list of enabled outputs. Let
weston_compositor_add_output() and weston_compositor_remove_output()
handle the moves between the lists.
This way weston_output_enable() does not need to remove and
oops-it-failed-add-it-back. weston_output_disable() does not need to
manually re-add the output back to the pending list.
To make everything nicely symmetric and fix any unbalancing caused by
this:
- weston_output_destroy() explicitly wl_list_remove()s
- weston_compositor_add_pending_output() first removes then inserts, as
we have the assumption that the link is always valid, even if empty.
Update the documentations, too.
v2:
- talk about "list of enabled outputs"
- keep wl_list_remove in weston_compositor_remove_output in its old
place
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Trying to make it more readable. Things that happen in the same step are
kept in the same paragraph.
v2: talk about "list of enabled outputs"
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Dead code as orientation cannot be changed anymore, see patches:
ivi-shell: remove layer_set_orientation API
ivi-shell: remove surface_set_orientation API
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: added commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This API is used to rotate the contents of
application's buffer, which are in the render
order list of the layer. But this API is not
needed because an application can rotate
its buffers with set_buffer_transform request
of wl_surface interface
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This API is used to rotate the contents of
application's buffer. But it is not needed
because an application can rotate its buffers
with set_buffer_transform request of
wl_surface interface.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It is analagous to layer_remove_surface API.
The API removes a layer from the render order
of the screen.
v3:
add the new vfunc at the end of
the ivi_layout_interface struct.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Eugen Friedrich <friedrix@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When we receive configure_notify we should update the surface's
position by calling xwayland_api->set_xwayland(). Otherwise some surfaces
like dnd surfaces from xwayland views are "stuck" at one place. When
setting XWAYLAND state though we should always call view_set_position(),
not just the first time we set this state.
Signed-off-by: Ilia Bozhinov <ammen99@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Now we keep track of serial->state association and we discard the states
that the client ignored.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We were checking against the pending size, which lead some clients
(simple-egl) to crash because they sent a buffer before acknowledging
the latest configure event.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We need to make sure the client bound dmabuf with a high enough
version to receive modifier events before sending them or the
client will crash.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We shouldn't free &modifier_invalid because it wasn't allocated
with malloc()
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Some log messages weren't terminated with a newline.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
It looks like there are some code paths where this has been forgotten, so
it likely doesn't work as is. It's probable that nobody has actually
used this in a very long time, so it's not worth the maintenance burden
of keeping xkbcommon vs raw keyboard code anymore.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When switching a state twice in a row, we were overwriting the old value
without setting it back, sending a wrong state to the client.
Now we update our requested state, then check if we need to schedule a
configure event, if we have one scheduled already or even if we can
cancel it.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
mesa's freedreno driver supports importing dmabufs with format
DRM_FORMAT_NV12 and DRM_FORMAT_MOD_SAMSUNG_64_32_TILE modifier.
demonstrate weston modifier advertising and import path using this
combination when run with --import-format=NV12.
v2:
- hard code format if platform doesn't implement
EGL_EXT_image_dma_buf_import_modifiers and cannot advertise
format/modifier support.
- squash using valid frame data to fill dmabuf planes
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
abstract drm specific bits to struct drm_device and support running on
freedreno. introduce 'modifier' event.
v2: rebase to master, deprecate 'format' event.
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Arnaud Vrac
Pekka Paalanen
Bryce Harrington
Philipp Kerling
Derek Foreman
Michael Teyfel
Ucan, Emre (ADITG/SW1)
Ilia Bozhinov
Quentin Glidic
Varad Gautam
Varad Gautam