The protocol does not require us to flush_damage() on wl_buffer
destruction. In fact, by the time the server receives this request, the
client may have already clobbered the buffer's storage, so we could be
reading undefined data. Instead, just forget about the buffer. The
protocol already says, that a client must not destroy a buffer that is
being read by the server, or the window contents become undefined.
The practical reason for this change is that the following commit can
consolidate wl_buffer destruction listener handlers.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
If a client called wl_surface.attach with the same wl_buffer as
previously, the compositor would mistakenly send a release on that
buffer. This will cause problems only when clients start to properly use
the wl_buffer.release event.
Do not send wl_buffer.release if the same buffer is attached again.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Do not remove the input panel layer from the layer list when the
shell is locked in hide_input_panels().
https://bugs.freedesktop.org/show_bug.cgi?id=56543
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
This a basic calibration tool designed for "in factory" calibration of a touch
screen. The constants for the calibration functions:
x' = Ax + By + C and
y' = Dx + Ey + F
Are printed on stdout when the calibration is completed.
When redrawing surfaces, use_shader() checks if the desired shader is
already in use to avoid a call to glUseProgram(). However, once the
debug binding is activated, that same check would prevent the usage of
the recompiled shaders until something cause a different shader to be
passed to use_shader().
It's pure WM-related function, so use the same 'weston_wm_' prefix that others
in the same file are already using.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
It was already being used in most of launcher.c and window-manager.c, so let's
make a standard everywhere now.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
In a few cases, we set a motion handler just to be able to set a fixed
cursor. This adds a default cursor helper that can be used in those cases.
In case of the 'transformed' test case, we also avoid a brief flicker
of the pointer cursor, which is set on enter when the move grab is lifted.
Change the boolean parameter 'resize_hint' into a bitmask 'flags'.
Note, that this flags is very different to the other flags used in
creating the toysurface implementations. They do not make sense to mix
one way or the other. Prepare() cannot change the surface type, and
surface constructors do not care for dynamic hint flags.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
When a window's buffer transformation is set, its buffers are
reallocated with the appropriate size (i.e., with width and height
swapped in case of 90 or 270 degree rotation).
Since the opaque region was set in frame_resize_handler(), if a client
created a frameless window setting the toplevel widget as opaque would
have no effect.
This patch fixes this by moving the call wl_surface_set_opaque_region()
to idle_resize(), and changing the latter function to set the whole
window as opaque if its toplevel widget has the opaque flag set.
Fix the following build warnings, and the build failures due to the
warning fixes:
CC libshared_cairo_la-image-loader.lo
image-loader.c:369:1: warning: no previous prototype for 'load_image'
CC x11_backend_la-compositor-x11.lo
compositor-x11.c: In function 'x11_output_set_icon':
compositor-x11.c:396:2: warning: implicit declaration of function 'load_image'
compositor-x11.c:396:8: warning: assignment makes pointer from integer without a cast
CC wayland_backend_la-compositor-wayland.lo
compositor-wayland.c: In function 'create_border':
compositor-wayland.c:97:2: warning: implicit declaration of function 'load_image'
compositor-wayland.c:97:8: warning: assignment makes pointer from integer without a cast
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The implementation of buffer transformation didn't handle transformed
shm buffers properly. The partial texture upload was broken since the
damage is in surface coordinates that don't necessarily match the
buffer's coordinates. It also wouldn't handle the buffer stride
properly, resulting in incorrect rendering if it didn't match the
buffer's width.
The logic used for converting texture coordinates was generalized and
moved out of the renderer, since this conversion may be useful in other
places, such as the backends.
To reproduce, launch the terminal, open a second window using Ctrl-Shift-N,
go back to the first window, and press Ctrl-D. The terminal's master FD gets
events even after being closed, causing terminal_destroy to be called twice
on the same object.
To fix this, I'm adding a function to stop watching an FD.
We were pulling in cairo and the image loading libraries through libshared.
Split out libshared into a core libshared and a libshared-cairo that
pulls in the extra libraries.
Since a6813d288, there is no longer a "type" key in the [shell] config section.
Instead the code accepts a [core] section with a modules key, containing a
comma separated list of modules to load. This patch removes the type keys
and adds a core section in the example weston.ini config file.
Since surface.commit was introduced, opqaue regions are stored in a pending
variable that isn't used until surface.commit. Xwayland uses the surface opaque
region as a way to tell weston what region of the surface should be opaque.
However when this pending opaque region was introduced, xwm was not updated
and so we have the 'black = transparent' problem again. This patch fixes the
problem by having xwm use the pending opaque regions.
Listen for wl_buffer.release events in the shm path, and if a previously
posted buffer is still held by the server, allocate another one. The
maximum of two should be enough, since there is no point for a server to
hold more than one buffer at a time.
Buffer allocation happens as needed instead of window creation time.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
After the toysurface rewrite, windows do not have a valid Cairo surface
outside their repaint cycle, so tooltips are not getting their size
right.
Create a dummy Cairo surface only for querying text extents, so we do
not rely on any window surfaces of parent windows or otherwise.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Implement shm_surface as a sub-class of toysurface, and unify the
toysurface call sites removing most buffer type specific branching.
Do not destroy and create a surface, if the size does not change.
The resizing optimization of shm surfaces is retained, but the pool is
moved from struct window to struct shm_surface, since it does not apply
to egl_window_surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
We need more structure to the way we handle the backing storage in
toytoolkit, to make it possible to double-buffer the shm case properly.
The existing buffer handling is very complex with the three
different cases:
- EGLSurface backed Cairo surface with a window associated
- wl_shm backed Cairo surface with a window associated
- wl_shm backed Cairo surface without a window, as used by dnd.c
Introduce the toysurface abstraction, which defines the interface for
the both buffer handling cases that have a window associated. It also
means, that windows will not have a valid Cairo surface outside of their
repaint cycle.
Convert the EGLsurface case into toysurface for starters. For EGL-based
Cairo surfaces, the private data is no longer needed. Destroying
egl_window_surface will trigger the destruction of the cairo_surface_t,
not vice versa. This is possible because display_create_surface() is
shm-only.
The shm cases are left untouched.
As a side-effect, display_acquire_window_surface() and
display_release_window_surface() will no longer use the 'display'
argument. Instead, display will be the one inherited from the window.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Toytoolkit doesn't buy us anything in this case, we're not rendering or
handling regular input events. Just talk directly to wl_display and
look up the 'input_method' global directly.
The key events we pass through to the input_method_context has to have
a serial number that corresponds to the key event we got. The struct display
serial is updated on pointer enter/leave and keyboard events, but not the
input method keyboard events. So the display serial will never correspond
to the key event we're dealing with and we have to pass through the
serial we get from the key event.
This simple change allows you to drive the editor using the keyboard
(supporting backspace and delete and left and right arrow keys.) The idea
behind this change is to allow the testing of the interoperation between a
virtual keyboard and real one.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Allow an input method to forward (unfiltered) key and modifier events
from the hardware keyboard to the client.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Send state and modifier from the demo keyboard with the keysym event and
take them into account in the editor example.
Add some helper functions to write and read a modifiers_map array.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Rename the key event in text_model to keysym and add serial, time and
modifiers arguments. Add a modifiers_map event to transfer an array of
0-terminated modifier names, so that a mapping of modifiers to the
modifier bit mask is possible.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>