For the sample clients we introduce xmalloc() to simplify OOM-handling.
This patch only converts a few callsites, but this will be our strategy
going forward.
It is possible to receive a motion event that was generated by the
compositor based on a pick of a surface of old dimensions. This was
triggerable on toytoolkit clients when minimising. The new window
dimensions were propagated through the widget hierarchy before the event
was dispatched.
This issue was triggering a segfault due to the focussed widget being
lost as the client code tried to identify which widget should have the
focus using co-ordinates outside the dimensions of the surface.
https://bugs.freedesktop.org/show_bug.cgi?id=66795
If the shift modifier is active then we don't make the cursor and the
anchor the same and as a result we develop a selection in the direction
that the arrow key gets pressed in.
https://bugs.freedesktop.org/show_bug.cgi?id=66802
As some CJK fonts are dual-width, calculate the average width of ASCII
glyphs and use that instead of the max_x_advance of the font. This is
what VTE does too.
https://bugs.freedesktop.org/show_bug.cgi?id=63796
The panel and background were never created for hotplugged outputs and
since some parts of the code assume that they always exist that would
lead to desktop-shell client to crash in that case.
This was easier to spot when the display was locked, because Weston
respawns the shell client and the user might not notice since there is
no flicker.
https://bugs.freedesktop.org/show_bug.cgi?id=66531
This lets the code for adding panel launchers and setting up the
background to be moved into panel_* and background_* functions.
Note that this changes the behavior of the default launcher. Before
this change a default launcher would be added only if there was no
config file. Now a launcher is also added if there is no valid
launcher section.
Originally window.c was requesting version 1 but several clients were
calling version 2 and 3 events including the desktop shell itself.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
In preparation for upcoming changes, we want to make sure that apps
written with the toy toolkit continue to operate properly if no XKB
keymap is received. If there's no XKB keymap, then we shouldn't
try to figure out keyboard modifier states (since we probably don't
even have equivalents of PC-style modifiers).
Reviewed-by: Singh, Satyeshwar <satyeshwar.singh@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
AC_USE_SYSTEM_EXTENSIONS enables _XOPEN_SOURCE, _GNU_SOURCE and similar
macros to expose the largest extent of functionality supported by the
underlying system. This is required since these macros are often
limiting rather than merely additive, e.g. _XOPEN_SOURCE will actually
on some systems hide declarations which are not part of the X/Open spec.
Since this goes into config.h rather than the command line, ensure all
source is consistently including config.h before anything else,
including system libraries. This doesn't need to be guarded by a
HAVE_CONFIG_H ifdef, which was only ever a hangover from the X.Org
modular transition.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
[pq: rebased and converted more files]
A wayland compositor doesn't provide a mechanism for buffer sharing between
clients. Under X, one client can render to a Pixmap and another can use it
as a source in a subsequent drawing operations. Wayland doesn't have a
mechanims to share Pixmaps or textures between clients like that, but it's
possible for one client to act as a nested compositor to another client.
This less work than it sounds, since the nested compositor won't have to
provide input devices or even any kind of shell extension. The nested
compositor and its client can be very tightly coupled and have very specific
expectations of what the other process should provide.
In this example, nested.c is a toytoolkit application that uses cairo-gl
for rendering and forks and execs nested-client.c. As it execs the client,
it passes it one end of a socketpair that will be the clients connection
to the nested compositor. The nested compositor doesn't even create a
listening socket.
The client is a minimal GLES2 application, which just renders a spinning
triangle in its frame callback.
Ignore the whole commit-string or preedit_string transaction when the
delete_surrounding event was invalid.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Delete text marked with wl_text_input::delete_surrounding_text on
preedit_string event. When text is explicitly marked with
delete_surrounding_text do not delete selected text.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
This lets you try fullscreen in different methods, sizes, scales,
translations, etc. You can verify both output and input (via mouse over
of the rectangles).
Whether or not a shm pool is used for resizing is now configurable at
build time (--disable-resize-optimization).
[pq: removed an unnecessary hunk from the patch]
Scale-crop mode scales the wallpaper to tightly fill the whole output,
but preserving wallpaper aspect ratio. If aspect ratio differs from the
output's, the wallpaper is centered cutting it from top/bottom or
left/right.
Add this to the weston.ini man page, and explain all three modes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
On Raspberry Pi, weston-desktop-shell is so slow to start, that the
compositor has time to run the fade-in before the wallpaper is up. The
user launching Weston sees the screen flipping to black, the fbcon
fading in, and then the desktop popping up.
To fix this, wait for the weston-desktop-shell to draw
everything before starting the initial fade-in. A new request is
added to the private desktop-shell protocol to signal it. If a
desktop-shell client does not support the new request, the fade-in
happens already at bind time.
If weston-desktop-shell crashes, or does not send the 'desktop_ready'
request in 15 seconds, the compositor will fade in anyway. This should
avoid a blocked screen in case weston-desktop-shell malfunction.
shell_fade_startup() does not directly start the fade-in but schedules
an idle callback, so that the compositor can process all pending events
before starting the fade clock. Otherwise (on RPi) we risk skipping part
of the animation. Yes, it is a hack, that should have been done in
window.c and weston-desktop-shell instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We pick the window scale/tranform based on what the output uses, which means
we can avoid rotations in the compositor, and get sharper rendering
in scaled outputs.
We used to just store the buffer size here which is not right if the
surface has a buffer_transform or a buffer_scale. To fix this we pass
the transform and scale into the toysurface prepare and swap calls and
move both the surface to buffer and the buffer to surface size
conversion there.
Without this interactive resize on the top or left sides of a transformed
or scaled surface will not work correctly.
Apparently some compilers complain about set but not used variables
'available' and 'bufs', but I don't get the warning. Still, separate the
debugging code from shm_surface_buffer_release(), so that we only
compute 'bufs' when it is printed. This should fix the warnings.
The debugging code now prints the shm_surface buffer state before and
after, instead of just after.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This set of changes adds support for searching for a given config file
in the directories listed in $XDG_CONFIG_DIRS if it wasn't found in
$XDG_CONFIG_HOME or ~/.config. This allows packages to install custom
config files in /etc/xdg/weston, for example, thus allowing them to
avoid dealing with home directories.
To avoid a TOCTOU race the config file is actually open()ed during the
search. Its file descriptor is returned and stored in the compositor
for later use when performing subsequent config file parses.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
In case a toytoolkit application manages to schedule resizes constantly,
throttle them to the main surface display.
When resizing, all surfaces are updated synchronously, so it also makes
sense to synchronize on the main surface's frame callback particularly.
Rendering any faster will not make sense.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Mesa's eglSwapBuffers() waits for the frame event from the previous
swapBuffers, before it returns. Apparently eglSwapInterval(), which
should be able to disable the wait, is unimplemented for now.
When a sub-surface contains an EGL widget, and the commit mode is
synchronized, the frame events will not be delivered to EGL until the
parent surface gets committed. Therefore rendering the EGL widget twice
would lead to a deadlock.
When the window is being resized, we need to force a repaint of the EGL
widget, too, to make the whole window consistent. For that, we need to
make sure the frame event from the previous eglSwapBuffers() actually
arrives.
This patch adds an extra wl_surface.commit(parent), when the window is
being resized, which should guarantee, that the previous eglSwapBuffers
gets its event.
To properly handle an EGL widget in a sub-surface, running in its own
thread, the EGL widget's automatic updates should be paused before
sending the extra wl_surface.commit(parent). A natural place for the
pause would be in the widget's resize hook. However, wl_surface.commit
cannot be called right after resize hooks, because it would commit new,
incomplete surface state. Therefore this patch is not enough for
threaded toytoolkit applications. Luckily those do not exist yet.
When eglSwapInterval() gets implemented, this patch should be reverted.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Kristian Høgsberg
Rob Bradford
Peter Maatman
Peng Wu
Ander Conselvan de Oliveira
Jason Ekstrand
Daiki Ueno
Matt Roper
Daniel Stone
Armin K
U. Artie Eoff
Jan Arne Petersen
Alexander Larsson
Louis-Francis Ratté-Boulianne
Pekka Paalanen
Pekka Paalanen
Dima Ryazanov
Ossama Othman