Remoting plugin support streaming image of virtual output on drm-backend
to remote output. By appending remote-output section in weston.ini,
weston loads remoting plugin module and creates virtual outputs via
remoting plugin. The mode, host, and port properties are configurable in
remote-output section.
This plugin send motion jpeg images to client via RTP using gstreamer.
Client can receive by using following pipeline of gst-launch.
gst-launch-1.0 rtpbin name=rtpbin \
udpsrc caps="application/x-rtp,media=(string)video,clock-rate=(int)90000,
encoding-name=JPEG,payload=26" port=[PORTNUMBER] !
rtpbin.recv_rtp_sink_0 \
rtpbin. ! rtpjpegdepay ! jpegdec ! autovideosink \
udpsrc port=[PORTNUMBER+1] ! rtpbin.recv_rtcp_sink_0 \
rtpbin.send_rtcp_src_0 !
udpsink port=[PORTNUMBER+2] sync=false async=false
where, PORTNUMBER is specified in weston.ini.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Xwayland block SIGUSR1 signal for handling this signal. However, if some
weston plugins creates additional threads before xwayland is loaded,
this signal get delivered these threads and causes weston quit.
Therefore, we should set up SIGUSR1 blocking early so that these threads
can inherit the setting when created.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Add support virtual output for streaming image to remote output by
remoting-plugin which will be added by the patch:
"Add remoting plugin for output streaming."
The gbm bo of virtual output is the linear format.
Virtual output is implemented based on a patch by Grigory Kletsko
<grigory.kletsko@cogentembedded.com>.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Store usage flags of gbm bo in drm_output in order to specify the bo
format for each output. A following patch will add a new type of
drm_output which requires different gbm_bo_flags.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Add new API to gl-renderer interface for providing fence sync fd. the
backend can wait for GPU rendering by this API.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
In the case where CreateContext/MakeCurrent fails, we still want to
know what the EGL driver is capable of.
Move the EGL info printing, just after the eglInitialize() call to
ensure that.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Split the two into separate functions. Former requires an initialized
EGL display, while the latter a current context.
We will use that distinction with the next patch.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We are currently formatting 32-bit signed integers into 8 byte buffers,
which are too small, causing the compiler to complain. Update the buffer
size to the minimum required value of 12 bytes: 1 for the sign, 10 for
the number, and 1 for the null byte terminator.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Not every output will have a backlight control, and even if it does we
may just not be able to find it. Not having backlight control isn't an
error, so don't spam the log with it, as doing so can confuse users into
thinking this is an actual error which is responsible for their real
problems.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Not having swap_buffers_with_damage could cause a performance impact on
some backends, but at least on GBM it causes no issues. It also seems to
confuse users into thinking it's a legitimate error which could explain
session slowness.
Similarly with buffer_age, whilst we do lose a little bit of performance
by not being able to do partial renders, it is not a great deal, and the
user is unlikely to be able to do anything about it in any event.
Remove the warning; we print the full extension list at startup, so we
already have enough information from the logs to easily diagnose any
real errors.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Keep non-desktop heads representing e.g. head mounted displays turned off by
default. When using the DRM backend they can still be enabled by setting an
explicit [output] mode (or "mode=preferred") in weston.ini.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Use the DRM connector "non-desktop" property to mark weston_heads that
represent head mounted displays and other non-standard displays that the
desktop should not be extended to.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add non-desktop property for weston_heads representing displays that the
desktop should not be extended to by default, e.g. head mounted displays.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Implement drm_view_is_opaque() using weston_view_is_opaque(). Also, use
weston_view_is_opaque() directly in drm_output_propose_state(), with the
clipped_view.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Use the weston_surface is_opaque property, the opaque region, and the view
alpha value to determine whether the weston_view is opaque in a specific
region.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add an is_opaque property that is set to true if the attached buffer does not
have an alpha component, or if the solid color is non-transparent.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add the centered option as background-type. This draws the image
once in the center of the screen. If the image is larger, it will
be cropped like scale-crop.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Only draw the background once, using the the current default
background color or the user specified background color.
This allows for non-filling background image implemenation
while still using the specified background color.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Weston should not exit if stdin is a closed stream. This allows
to launch with a closed stdin:
# weston <&-
This fixes screen sharing using weston: Weston closes the stdin
before forking itself to execute the screen sharing instance of
weston. Before this patch screen sharing failed with:
Screen share failed: No wl_shm found
unknown child process exited
Fixes: f0d39b2243 ("weston: Set CLOEXEC on stdin")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Add a 'drm-debug' scope which prints verbose information about the DRM
backend's repaint cycle, including the decision tree on how views are
assigned (or not) to planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Shift up our calculation of the flags we use for atomic commits. We will
later use this to differentiate between test-only and full commits when
printing debug information inside drm_output_state_apply_atomic.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a 'scene-graph' debug scope which will dump out the current set of
outputs, layers, and views and as much information as possible about how
they are rendered and composited.
Signed-off-by: Daniel Stone <daniels@collabora.com>
As a counterpart to weston_layer_set_mask_infinite(), returning if the
mask is the same as what is set.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is better than running Weston with WAYLAND_DEBUG=server:
- It is enabled on demand, no unnecessary flooding and no need to
restart the compositor if debug was enabled.
- It prints client pointers so that messages with different clients can
be seen apart.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
parse and print message arguments in protocol_log_fn
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Instead of a compile time choice, offer the XWM debugging messages
through the weston-debug protocol and tool on demand. Users will not
need to recompile weston to get XWM debugging, and it won't flood the
weston log.
The debug scope needs to be initialized in launcher.c for it be
available from start, before the first X11 client tries to connect and
initializes XWM.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
pass the wm_debug scope to weston_debug_scope_printf API to append
the scopename to the timestr
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is preparation for using the weston-debug infrastructure for
WM_DEBUG. dump_property() may be called from different debugging
contexts and often needs to be prefixed with more information.
An alternative to this patch would be to pass in the weston_debug_scope
as an argument to dump_property(), but then all callers would need to be
converted to weston-debug infra in a single commit.
Therefore require the callers to provide the FILE* to print to.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Write the output of dump_property() out in one log call. When multiple
processes (weston and Xwayland) are writing to the same file, this will
keep the property dump uninterrupted by Xwayland debug prints.
This is also preparation for more development in the same direction.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This registers a new weston-debug scope "log" through which one can get
live log output interspersed with possible other debugging prints. This
is implemented by passing the format and varargs received in our usual
logging entrypoints through to the debug scope as well.
Anywhere where the varargs set is used twice (once for vfprintf, another
for the debug scope), we copy the va_list in order to avoid reusing it,
which leads to memory safety issues.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
A tool for accessing the zcompositor_debug_v1 interface features.
Installed along weston-info, because it should be potentially useful for
people running libweston-based compositors.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Added a man page for weston-debug client
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
[Pekka: fixed 'missing braces aroudn initializer' warning]
Add --list and --all arguments, using interface advertisement.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Let users enable the compositor debug protocol on the compositor command
line. This allows weston-debug tool to work.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_debug is both a libweston API for relaying debugging messages,
and the compositor-debug wayland protocol implementation for accessing those
debug messages from a Wayland client.
weston_debug_compositor_{create,destroy}() are private API, hence not
exported.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
append the debug scope name along with the timestamp in
weston_debug_scope_timestamp API
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add explicit advertisement of debug scope names.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
This is a new debugging extension for non-production environments. The
aim is to replace all build-time choosable debug prints in the
compositor with runtime subscribable debug streams.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Added new libweston-$MAJOR-protocols.pc file and install that
for external projects to find the XML files installed by libweston.
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Use noarch_pkgconfig_DATA instead, add ${pc_sysrootdir}, drop
unnecessary EXTRA_DIST of weston-debug.xml.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add explicit advertisement of available debug interfaces.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Change format of substituted variables to follow the pattern used by
configure_file() in Meson.
This helps the migration to Meson, making man/meson.build much cleaner.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Linux v4.7 introduced a new connector type for display parallel
interface (DPI). Add DPI to the list of connectors in the DRM
backend of Weston as well. This avoid DPI connectors showing up
as UNNAMED.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Client may map any file descriptor opened for writing with PROT_WRITE
themselves. On linux, even a read-only file descriptor to an unlinked
file can be re-opened with write permission through /proc/self/fd.
The only way to prevent this is to create a memfd which
is subsequently write-sealed. Unfortunately this prevents clients
from mapping with MAP_SHARED, which is already in widespread usage.
To isolate and protect the keymap, whilst allowing MAP_SHARED clients
to continue to work, use a unique file descriptor for each
wl_keyboard resource.
Reviewed-by: Daniel Stone <daniels@collabora.com>
We've always had "send_keymap" internally, but some places failed to use
it. Since we also use this in the text backend, export it.
Reviewed-by: Daniel Stone <daniels@collabora.com>
During de-init ensure removal of compositor destroy notification
from list. Otherwise a dongling pointer is left behind which will
affect other plugins.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>