CLASS_DIAGRAM has been obsolete in newer version of doxygen, and
it's enabled if HAVE_DOT and CLASS_GRAPH are set.
This increase DOT_GRAPH_MAX_NODES to avoid dot complaning,
and include dot/graphviz for doxygen.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Same as LaTeX, RTF is being made obsolete in newer version of doxygen.
Also, we weren't really using it so there's no harm in removing it
entirely.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
LaTeX has become obsolete in newer doxygen version, and we weren't using
it at all so remove it entirely.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Introduced with e0a858a5f2, commit 'weston-debug: Introduce
weston_log_subscription and weston_log_subscriber objects'. We don't
really return a weston_log_subscription so let's remove it.
Some newer doxygen detects this and we are treating warning as errors.
Fixes#594
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This is adding basically a copy of alpha-blending-test.c. The difference
is that here we use ICC files to set up the output color profile, and
then test light-linear blending only. BLOCK_WIDTH is set to 1 to fit
inside the output size used by the fixture setup, which is smaller than
in the original, but does not change the results.
The test is aimed at testing how color-lcms module succeeds in
linearizing the output of different ICC output profiles. Incorrect
linearization should cause changes in blending results.
The tolerance is taken from the currently achieved error statistics
(1.40908) and rounded up a little to achieve a suitable margin.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It was binding to any advertised version, but it can't actually work
with version 4 (because it doesn't handle the new configure_bounds
event).
Other sample clients in the tree are hard-coding version 1, so do the
same here.
Fixes: 6d9fda7156 ("clients/presentation-shm: use xdg_shell instead of wl_shell")
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Switch from per-channel max error tolerance to max two-norm (Euclidean
distance) error. Geometrically this means that previously the accepted
volume was a +/- tolerance cube around the reference point, and now it
is a sphere with tolerance radius.
The real benefit is simplifying the code.
The error tolerance are also changed to float. Integers cannot represent
values between 1 and 2, and the jump from 1 to 2 would have been too
much. AdobeRGB tolerance gets relaxed a bit, while BT2020 tolerance
becomes stricter. The new tolerance values are the reported achieved
two-norm max errors plus a bit of margin.
Surprisingly the sRGB case tolerances remain strictly at zero, and
that's no bug in the test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
compare_float() was an ad hoc max error logger with optional debug
logging.
Now that we have rgb_diff_stat, we can get the same statistics and more
with less code. It looks like we would lose the pixel index x, but that
can be recovered from the dump file line number.
This patch takes care to keep the test condition exactly the same as it
was before. The statistics print-out has more details now.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Switch from per-channel max error tolerance to max two-norm (Euclidean
distance) error. Geometrically this means that previously the accepted
volume was a +/- tolerance cube around the reference point, and now it
is a sphere with tolerance radius. This makes the check slightly
stricter.
The real benefit is simplifying the code.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
compare_float() was an ad hoc max error logger with optional debug
logging.
Now that we have rgb_diff_stat, we can get the same statistics and more
with less code. It looks like we would lose the pixel index x, but that
can be recovered from the dump file line number.
This patch takes care to keep the test condition exactly the same as it
was before. The statistics print-out has more details now.
The recorded dump position is the foreground color as that varies while
the background color is constant.
An example Octave function is included to show how to visualize the
rgb_diff_stat dump.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is a special case of scalar_stat dumps to record all of two-norm
and RGB differences on the same line in the dump file.
This makes the dump file easier to handle when you want full RGB errors
recorded.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The recently introduced rgb_diff_stat value dumping feature logs the
"position" where the value or error was measured. The reference value
was used as the position, but the problem with the reference value is
that it is an output value and not an input value. Therefore mapping
that back to which input values promoted the error is not easy.
Fix that problem by passing the position explicitly into
rgb_diff_stat_update(), just like it is already passed in to
scalar_stat_update().
Currently the only user simply passes the reference value as position,
because there the input value is also the reference value. This is not
true for future uses of rgb_diff_stat.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The new field in struct scalar_stat allows recording all tested values
into a file. This is intended to replace ad hoc dumping code like in
alpha-blending-test.c.
To make it easy to set up, also offer a helper to open a writable file
whose name consists of a custom prefix and test name.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Seems it will be common to print all four min/max/avg sets of errors, so
move the printing code into a shared place.
While 0.0-1.0 is the natural range for color values, people are often
accustomed to working with 8-bit or even 10-bit pixel values. An error
of +/- 1 in 8-bit is more intuitive than +/- 0.004 in floating-point.
Hence 'scaling_bits' is added so the caller can determine the value
scaling. This will scale both the reported error numbers, and the
recorded error positions (rgb-tuples), so they are all comparable.
I'm happy to get rid of those two macros as well.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
More tests are going to need this.
The API is changed to work by copy in and copy out to match the other
color_util API. Hopefully this makes the caller code easier to read.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We treat the argv we pass into the compositor as its to mangle, just as
it is free to do so for POSIX argv. To support this, we stash argv away
and free the saved copy later so as to not leak.
This works perfectly, except when we never call the compositor at all,
and have no saved array to free. Make sure we free the args in this
case, which can be seen as a leak of any generated args when a test
skips on preflight checks, e.g. drm-smoke when not running in CI.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Pango, Cairo, and fontconfig, all want to leave thread-global data
hanging around in order to maintain a cache. Try to clean up as much of
it as we possibly can on exit, apart from the Pango language string
which appears to be unfreeable, so has been added to LSan suppressions.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rework PangoCairo context initialisation, so we don't leak either the
Pango layout, or any of the derived objects it creates.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This code was all dead, since neither cairo-glesv2 nor the sample nested
compositor ever made it to the Meson build.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This was introduced in a partial MR, where the later commits in the new
multi-GPU MR fully fix it, but the initially cherry-picked ones don't.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We were only destroying these when the parent display removed the output
global. Do it on shutdown too, so we can avoid leaking it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Many programs use this information to help position pop-ups properly, and
without it funny things happen. For example, nedit and tkinter apps will
position their menus incorrectly either all the time or after an initial
window move, firefox may position right-click pop-ups incorrectly
depending on other internal state.
https://tronche.com/gui/x/icccm/sec-4.html#s-4.1.5 has much detail on
how this should work, and the Advice to Implementors section shows that
common client practices will break in the face of our miserly handling
of ConfigureNotify events.
Instead of trying to send it only for configure requests received when a
client is in a fullscreen state, send them much more frequently.
Fixes#619
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Currently weston_wm_window_send_configurenotify is only called for
fullscreen clients, and it is written to be correct only in that case.
Fix it up to handle other cases properly so we can use it for them in a
later commit. Synthetic Configure Notify events are relative to the
root window, so this means adding our window co-ordinate when
necessary.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We're going to need this to properly send xwayland events later, so add
API to get the current x,y co-ordinates of a shell surface and add it to
the kiosk and desktop shells.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
It doesn't need to be using desktop-shell; trying to use it is not
sensible as it will try to bind to all the devices we're repeatedly
creating and destroying, sometimes lose the race, and fail the test
because desktop-shell has died too early.
Signed-off-by: Daniel Stone <daniels@collabora.com>
noop-renderer needs to actually access the buffer content, to ensure
that the bad-buffer test works. This was previously done using a
volatile variable, but clang rightly pointed out that the variable
access had no effect (since the volatile stack variable was never read
from, and the source is not volatile), so 9b0b5b57dd changed it to be
explicitly marked it as unused to suppress the compiler warning.
Unfortunately suppressing the warning still leaves the compiler free to
optimise out the access.
Replace the variable decorations with actually using the result of the
read, so we can be really sure that it's never going to be optimised
away.
Signed-off-by: Daniel Stone <daniels@collabora.com>
ca9bb01fe6 made it so that we already set shm_buffer, width, height,
etc, in the core. There's no need for the renderer to do this.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Our positioning of override redirect windows falls apart when an
app is on the fullscreen layer, because we end up putting its
menus and tooltips beneath it. This patch raises the special
override redirect layer to be just below things like on-screen
keyboards (and, unfortunately, above things like panels).
There is no perfect way to deal with this problem, especially
for content like tooltips that don't come with transience hints.
In some cases override redirect menus could be better placed by
using the parenting/transience information provided with them
at map time, and we should probably do that at some point, but
that would still leave us with tooltips below full screen
applications, and the need for this layer change.
based on a patch
Co-authored-by: Hideyuki Nagase <hideyukn@microsoft.com>
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
I changed the layer position and the comments, so:
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Make fail_on_null static inline and put it in xalloc.h so we can use the
header exclusively instead of having to link with the library for it.
This is so we can use xalloc in places (like the RDP backend) without
having to bring in libshared.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
It's not really useful to have libweston without libweston-desktop. It's
also very little code.
Merging both into the same DSO will allow us to cut out a bunch of
indirection and pain.
Signed-off-by: Daniel Stone <daniels@collabora.com>
A view shouldn't be mapped if a surface isn't mapped, and it shouldn't
be in the scene graph if it isn't mapped either. Print when this happens
so you can see more from the debug.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently the idle_repaint_source is removed when the output is destroyed.
This covers the most common case: When a monitor is unplugged then the
corresponding DRM output is destroyed and not just disabled.
However, outputs can be explicitly disabled by the shell. In this case the
output is not removed and idle_repaint() may be called for a removed
output.
Remove the idle_repaint_source in weston_compositor_remove_output() to fix
this. And reset the variable to ensure that the source can be created
again.
Removing the source in weston_output_release() is now no longer necessary
since it calls weston_compositor_remove_output().
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
It's not the most code ever, but it does make desktop-shell somewhat
more complicated for questionable (i.e. no) end-user benefit.
When desktop-shell is back in more healthy shape it could potentially be
reintroduced, but for now it's just making it more difficult to reason
about desktop-shell and fix it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
weston_compositor_reflow_outputs() assumes that all output are positioned from
left to right with no gaps in the same order in which they where created.
If the shell moves an output with weston_output_move() then this assumption is
no longer true. So stop reflowing the outputs in the case. The shell is now
responsible for positioning all outputs as needed.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Particularly important was _XWAYLAND_ALLOW_COMMITS atom which caused
some annoying flicker when resizing or hoovering over buttons.
This was introduced with 'shared/xcb-xwayland: Split into common
helpers' and somehow I missed those atoms.
Fixes 49d6532254
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This is another followup to ffc011d6a3
("backend-drm: check that outputs and heads are in fact ours") which missed
some places.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
https://specifications.freedesktop.org/wm-spec/1.4/ar01s05.html says
"The Window Manager MUST set _NET_FRAME_EXTENTS to the extents of the
window's frame", so this is probably something we should be doing.
Some programs (such as some versions of Firefox) expect this to be present,
and will render popups in wrong locations if it's not.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We need these values to calculate frame extents to properly set
_NET_FRAME_EXTENTS, but we don't want to calculate them twice.
Break out these bits from frame_resize_inside, and update it to use
the new function.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Marius Vlad
Pekka Paalanen
Michel Dänzer
Daniel Stone
Derek Foreman
Hideyuki Nagase
Michael Olbrich