Backport #21351
This fixes error "unauthorized_client: invalid client secret" when
client includes secret in Authorization header rather than request body.
OAuth spec permits both:
https://www.rfc-editor.org/rfc/rfc6749#section-2.3.1
Clients in possession of a client password MAY use the HTTP Basic
authentication scheme ... Alternatively, the authorization server MAY
support including the client credentials in the request-body
Sanity validation that client id and client secret in request are
consistent with Authorization header.
Improve error descriptions. Error codes remain the same.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
The images used by Gitea's drone pipeline were upgraded to Go 1.19.x
It causes the lint fails because Go 1.19 uses new code format.
This PR partially backport #20758 (including the emoji-data sync),
partially fix the format manually.
Backport #20925
This commit updates the `GET /api/v1/repos/{owner}/{repo}/archive/{archive}`
endpoint which prior to this PR had a couple of issues.
1. The endpoint had a hard-coded 20s timeout for the archiver to complete after
which a 500 (Internal Server Error) was returned to client. For a scripted
API client there was no clear way of telling that the operation timed out and
that it should retry.
2. Whenever the timeout _did occur_, the code used to panic. This was caused by
the API endpoint "delegating" to the same call path as the web, which uses a
slightly different way of reporting errors (HTML rather than JSON for
example).
More specifically, `api/v1/repo/file.go#GetArchive` just called through to
`web/repo/repo.go#Download`, which expects the `Context` to have a `Render`
field set, but which is `nil` for API calls. Hence, a `nil` pointer error.
The code addresses (1) by dropping the hard-coded timeout. Instead, any
timeout/cancelation on the incoming `Context` is used.
The code addresses (2) by updating the API endpoint to use a separate call path
for the API-triggered archive download. This avoids producing HTML-errors on
errors (it now produces JSON errors).
Signed-off-by: Peter Gardfjäll <peter.gardfjall.work@gmail.com>
Signed-off-by: Peter Gardfjäll <peter.gardfjall.work@gmail.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Peter Gardfjäll <peter.gardfjall.work@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #20981
When on /admin/users/ endpoints if the user is no longer in the DB,
redirect instead of causing a http 500.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport #20961
The webhook payload should use the right ref when it‘s specified in the testing request.
The compare URL should not be empty, a URL like `compare/A...A` seems useless in most cases but is helpful when testing.
Backport #21011
When migrating add several more important sanity checks:
* SHAs must be SHAs
* Refs must be valid Refs
* URLs must be reasonable
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #20886
Add code to test if GetAttachmentByID returns an ErrAttachmentNotExist error
and return NotFound instead of InternalServerError
Fix#20884
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #20850
This patch fixes the issue that the mirror address field is ignored from the repo setting form.
Co-authored-by: Gary Wang <wzc782970009@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #20878
The go crypto library does not pad keyIDs to 16 characters with preceding zeroes. This
is a somewhat confusing thing for most users who expect these to have preceding zeroes.
This PR prefixes any sub 16 length KeyID with preceding zeroes and removes preceding
zeroes from KeyIDs inputted on the API.
Fix#20876
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #20855
Whilst looking at #20840 I noticed that the Mirrors data doesn't appear
to be being used therefore we can remove this and in fact none of the
related code is used elsewhere so it can also be removed.
Related #20840
Related #20804
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #20844
Currently the function takes in the UserID option, but isn't being used within the SQL query. This patch fixes that by checking that only teams are being returned that the user belongs to.
Fix #20829
Backport #20785
This fixes a problem where the "All" line item on the Issues or Pull Requests page was only showing the count of the selected repos instead of the total of all issues/prs in all repos.
The "total number of shown issues" number is now stashed in a different context variable in case it wants to be used by the frontend later. It's currently not being used.
Fixes#20574
* Add disable download source configuration (#20548)
Add configuration to enable/disable download source from UI.
Co-authored-by: zeripath <art27@cantab.net>
* Fix BaseVars not used in renderering
* Fix disabled open in vscode menu when disabling download source from UI
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
This enables git.Command's Run to optionally use the given context directly so its deadline will be respected. Otherwise, it falls back to the previous behavior of using the supplied timeout or a default timeout value of 360 seconds.
repo's serviceRPC() calls now use the context's deadline (which is unset/unlimited) instead of the default 6-minute timeout. This means that large repo clones will no longer arbitrarily time out on the upload-pack step, and pushes can take longer than 6 minutes on the receive-pack step.
Fixes#20680
Keep the same behavior as 1.16
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Tyrone Yeh <tyrone_yeh@draytek.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
WebAuthn have updated their specification to set the maximum size of the
CredentialID to 1023 bytes. This is somewhat larger than our current
size and therefore we need to migrate.
The PR changes the struct to add CredentialIDBytes and migrates the CredentialID string
to the bytes field before another migration drops the old CredentialID field. Another migration
renames this field back.
Fix#20457
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
- Always respect the user's configured mime type map
- Allow more types like image/pdf/video/audio to serve with correct content-type
- Shorten cache duration of raw files to 5 minutes, matching GitHub
- Don't set `content-disposition: attachment`, let the browser decide whether it wants to download or display a file directly
- Implement rfc5987 for filenames, remove previous hack. Confirmed it working in Safari.
- Make PDF attachment work in Safari by removing `sandbox` attribute.
This change will make a lot more file types open directly in browser now. Logic should generally be more readable than before with less `if` nesting and such.
Replaces: https://github.com/go-gitea/gitea/pull/20460
Replaces: https://github.com/go-gitea/gitea/pull/20455
Fixes: https://github.com/go-gitea/gitea/issues/20404
There are existing packages out there whose version do not conform to SemVer, yet, one would like to have them available in a generic package repository. To this end, remove the SemVer restriction on package versions when using the Generic package registry, and replace it with a check that simply makes sure the version isn't empty.
Signed-off-by: Gergely Nagy <me@gergo.csillger.hu>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Gergely Nagy <algernon@users.noreply.github.com>
`no-transform` allegedly disables CloudFlare auto-minify and we did not
set caching headers on html or api requests, which seems good to have
regardless.
Transformation is still allowed for asset requests.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Andrew Thornton <art27@cantab.net>
When viewing a subdirectory and the latest commit to that directory in
the table, the commit status icon incorrectly showed the status of the
HEAD commit instead of the latest for that directory.
When you create a new release(e.g. via Tea) and specify a tag that already exists on the repository, Gitea will instead use the `UpdateRelease` functionality. However it currently doesn't set the Target field. This PR fixes that.
Backport #20373
Cron will try to run certain things at startup but these depend on multiple things
being set-up. Therefore we should initialize cron last.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #20299. Follow #20298. Only the `GlobalInitInstalled` function should prepare the SSH files for external server or starts the builtin server.
* `trustedUserCaKeys` is removed, use `SSH.TrustedUserCAKeys` directly
* introduce `ssh.Init`, move the SSH init code from `routers/init.go` to it
* `ssh.Init` will start builtin SSH server or prepare external SSH server files
KN4CK3R
Gusted
M Hickford
Jason Song
wxiaoguang
Tyrone Yeh
zeripath
José Carlos
Lunny Xiao
parnic
parnic
6543
silverwind
Norwin