You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

3093 lines
79 KiB

/*
* Copyright © 2010-2011 Benjamin Franzke
* Copyright © 2013 Jason Ekstrand
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial
* portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "config.h"
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
#include <assert.h>
#include <stddef.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <sys/mman.h>
#include <linux/input.h>
#include <wayland-client.h>
#include <wayland-cursor.h>
#ifdef ENABLE_EGL
#include <wayland-egl.h>
#endif
#include <libweston/libweston.h>
#include <libweston/backend-wayland.h>
#include "renderer-gl/gl-renderer.h"
#include "shared/weston-drm-fourcc.h"
#include "shared/weston-egl-ext.h"
#include "pixman-renderer.h"
#include "shared/helpers.h"
#include "shared/image-loader.h"
#include "shared/os-compatibility.h"
#include "shared/cairo-util.h"
#include "shared/timespec-util.h"
#include "fullscreen-shell-unstable-v1-client-protocol.h"
#include "xdg-shell-client-protocol.h"
#include "presentation-time-server-protocol.h"
#include "linux-dmabuf.h"
#include <libweston/windowed-output-api.h>
#define WINDOW_TITLE "Weston Compositor"
static const uint32_t wayland_formats[] = {
DRM_FORMAT_ARGB8888,
};
struct wayland_backend {
struct weston_backend base;
struct weston_compositor *compositor;
struct {
struct wl_display *wl_display;
struct wl_registry *registry;
struct wl_compositor *compositor;
struct wl_shell *shell;
struct xdg_wm_base *xdg_wm_base;
struct zwp_fullscreen_shell_v1 *fshell;
struct wl_shm *shm;
struct wl_list output_list;
struct wl_event_source *wl_source;
uint32_t event_mask;
} parent;
bool use_pixman;
bool sprawl_across_outputs;
bool fullscreen;
struct theme *theme;
cairo_device_t *frame_device;
struct wl_cursor_theme *cursor_theme;
struct wl_cursor *cursor;
struct wl_list input_list;
/* These struct wayland_input objects are waiting for the outer
* compositor to provide a name and initial capabilities. */
struct wl_list pending_input_list;
};
struct wayland_output {
struct weston_output base;
struct {
bool draw_initial_frame;
struct wl_surface *surface;
struct wl_output *output;
uint32_t global_id;
struct wl_shell_surface *shell_surface;
struct xdg_surface *xdg_surface;
struct xdg_toplevel *xdg_toplevel;
int configure_width, configure_height;
bool wait_for_configure;
} parent;
int keyboard_count;
char *title;
struct frame *frame;
struct {
struct wl_egl_window *egl_window;
struct {
cairo_surface_t *top;
cairo_surface_t *left;
cairo_surface_t *right;
cairo_surface_t *bottom;
} border;
} gl;
struct {
struct wl_list buffers;
struct wl_list free_buffers;
} shm;
struct weston_mode mode;
struct wl_callback *frame_cb;
};
struct wayland_parent_output {
struct wayland_backend *backend; /**< convenience */
struct wayland_head *head;
struct wl_list link;
struct wl_output *global;
uint32_t id;
struct {
char *make;
char *model;
int32_t width, height;
uint32_t subpixel;
} physical;
int32_t x, y;
uint32_t transform;
uint32_t scale;
struct wl_callback *sync_cb; /**< wl_output < 2 done replacement */
struct wl_list mode_list;
struct weston_mode *preferred_mode;
struct weston_mode *current_mode;
};
struct wayland_head {
struct weston_head base;
struct wayland_parent_output *parent_output;
};
struct wayland_shm_buffer {
struct wayland_output *output;
struct wl_list link;
struct wl_list free_link;
struct wl_buffer *buffer;
void *data;
size_t size;
int width;
int height;
pixman_region32_t damage; /**< in global coords */
int frame_damaged;
pixman_image_t *pm_image;
cairo_surface_t *c_surface;
};
struct wayland_input {
struct weston_seat base;
struct wayland_backend *backend;
struct wl_list link;
struct {
struct wl_seat *seat;
struct wl_pointer *pointer;
struct wl_keyboard *keyboard;
struct wl_touch *touch;
struct {
struct wl_surface *surface;
int32_t hx, hy;
} cursor;
} parent;
7 years ago
struct weston_touch_device *touch_device;
enum weston_key_state_update keyboard_state_update;
uint32_t key_serial;
uint32_t enter_serial;
uint32_t touch_points;
bool touch_active;
bool has_focus;
int seat_version;
struct wayland_output *output;
struct wayland_output *touch_focus;
struct wayland_output *keyboard_focus;
struct weston_pointer_axis_event vert, horiz;
bool seat_initialized;
struct wl_callback *initial_info_cb;
char *name;
enum wl_seat_capability caps;
};
struct gl_renderer_interface *gl_renderer;
static void
wayland_head_destroy(struct weston_head *base);
static inline struct wayland_head *
to_wayland_head(struct weston_head *base)
{
if (base->backend_id != wayland_head_destroy)
return NULL;
return container_of(base, struct wayland_head, base);
}
static void
wayland_output_destroy(struct weston_output *base);
static inline struct wayland_output *
to_wayland_output(struct weston_output *base)
{
if (base->destroy != wayland_output_destroy)
return NULL;
return container_of(base, struct wayland_output, base);
}
static inline struct wayland_backend *
to_wayland_backend(struct weston_compositor *base)
{
return container_of(base->backend, struct wayland_backend, base);
}
static void
wayland_shm_buffer_destroy(struct wayland_shm_buffer *buffer)
{
cairo_surface_destroy(buffer->c_surface);
pixman_image_unref(buffer->pm_image);
wl_buffer_destroy(buffer->buffer);
munmap(buffer->data, buffer->size);
pixman_region32_fini(&buffer->damage);
wl_list_remove(&buffer->link);
wl_list_remove(&buffer->free_link);
free(buffer);
}
static void
buffer_release(void *data, struct wl_buffer *buffer)
{
struct wayland_shm_buffer *sb = data;
if (sb->output) {
wl_list_insert(&sb->output->shm.free_buffers, &sb->free_link);
} else {
wayland_shm_buffer_destroy(sb);
}
}
static const struct wl_buffer_listener buffer_listener = {
buffer_release
};
static struct wayland_shm_buffer *
wayland_output_get_shm_buffer(struct wayland_output *output)
{
struct wayland_backend *b =
to_wayland_backend(output->base.compositor);
struct wl_shm *shm = b->parent.shm;
struct wayland_shm_buffer *sb;
struct wl_shm_pool *pool;
int width, height, stride;
int32_t fx, fy;
int fd;
unsigned char *data;
if (!wl_list_empty(&output->shm.free_buffers)) {
sb = container_of(output->shm.free_buffers.next,
struct wayland_shm_buffer, free_link);
wl_list_remove(&sb->free_link);
wl_list_init(&sb->free_link);
return sb;
}
if (output->frame) {
width = frame_width(output->frame);
height = frame_height(output->frame);
} else {
width = output->base.current_mode->width;
height = output->base.current_mode->height;
}
stride = cairo_format_stride_for_width(CAIRO_FORMAT_ARGB32, width);
fd = os_create_anonymous_file(height * stride);
if (fd < 0) {
weston_log("could not create an anonymous file buffer: %s\n",
strerror(errno));
return NULL;
}
data = mmap(NULL, height * stride, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (data == MAP_FAILED) {
weston_log("could not mmap %d memory for data: %s\n", height * stride,
strerror(errno));
close(fd);
return NULL;
}
sb = zalloc(sizeof *sb);
if (sb == NULL) {
weston_log("could not zalloc %zu memory for sb: %s\n", sizeof *sb,
strerror(errno));
close(fd);
munmap(data, height * stride);
return NULL;
}
sb->output = output;
wl_list_init(&sb->free_link);
wl_list_insert(&output->shm.buffers, &sb->link);
pixman_region32_init(&sb->damage);
pixman_region32_copy(&sb->damage, &output->base.region);
sb->frame_damaged = 1;
sb->data = data;
sb->width = width;
sb->height = height;
sb->size = height * stride;
pool = wl_shm_create_pool(shm, fd, sb->size);
sb->buffer = wl_shm_pool_create_buffer(pool, 0,
width, height,
stride,
WL_SHM_FORMAT_ARGB8888);
wl_buffer_add_listener(sb->buffer, &buffer_listener, sb);
wl_shm_pool_destroy(pool);
close(fd);
memset(data, 0, sb->size);
sb->c_surface =
cairo_image_surface_create_for_data(data, CAIRO_FORMAT_ARGB32,
width, height, stride);
fx = 0;
fy = 0;
if (output->frame)
frame_interior(output->frame, &fx, &fy, 0, 0);
sb->pm_image =
pixman_image_create_bits(PIXMAN_a8r8g8b8, width, height,
(uint32_t *)(data + fy * stride) + fx,
stride);
return sb;
}
static void
frame_done(void *data, struct wl_callback *callback, uint32_t time)
{
struct wayland_output *output = data;
struct timespec ts;
assert(callback == output->frame_cb);
wl_callback_destroy(callback);
output->frame_cb = NULL;
/* XXX: use the presentation extension for proper timings */
/*
* This is the fallback case, where Presentation extension is not
* available from the parent compositor. We do not know the base for
* 'time', so we cannot feed it to finish_frame(). Do the only thing
* we can, and pretend finish_frame time is when we process this
* event.
*/
weston_compositor_read_presentation_clock(output->base.compositor, &ts);
weston_output_finish_frame(&output->base, &ts, 0);
}
static const struct wl_callback_listener frame_listener = {
frame_done
};
static void
draw_initial_frame(struct wayland_output *output)
{
struct wayland_shm_buffer *sb;
sb = wayland_output_get_shm_buffer(output);
/* If we are rendering with GL, then orphan it so that it gets
* destroyed immediately */
if (output->gl.egl_window)
sb->output = NULL;
wl_surface_attach(output->parent.surface, sb->buffer, 0, 0);
wl_surface_damage(output->parent.surface, 0, 0,
sb->width, sb->height);
}
#ifdef ENABLE_EGL
static void
wayland_output_update_gl_border(struct wayland_output *output)
{
int32_t ix, iy, iwidth, iheight, fwidth, fheight;
cairo_t *cr;
if (!output->frame)
return;
if (!(frame_status(output->frame) & FRAME_STATUS_REPAINT))
return;
fwidth = frame_width(output->frame);
fheight = frame_height(output->frame);
frame_interior(output->frame, &ix, &iy, &iwidth, &iheight);
if (!output->gl.border.top)
output->gl.border.top =
cairo_image_surface_create(CAIRO_FORMAT_ARGB32,
fwidth, iy);
cr = cairo_create(output->gl.border.top);
frame_repaint(output->frame, cr);
cairo_destroy(cr);
gl_renderer->output_set_border(&output->base, GL_RENDERER_BORDER_TOP,
fwidth, iy,
cairo_image_surface_get_stride(output->gl.border.top) / 4,
cairo_image_surface_get_data(output->gl.border.top));
if (!output->gl.border.left)
output->gl.border.left =
cairo_image_surface_create(CAIRO_FORMAT_ARGB32,
ix, 1);
cr = cairo_create(output->gl.border.left);
cairo_translate(cr, 0, -iy);
frame_repaint(output->frame, cr);
cairo_destroy(cr);
gl_renderer->output_set_border(&output->base, GL_RENDERER_BORDER_LEFT,
ix, 1,
cairo_image_surface_get_stride(output->gl.border.left) / 4,
cairo_image_surface_get_data(output->gl.border.left));
if (!output->gl.border.right)
output->gl.border.right =
cairo_image_surface_create(CAIRO_FORMAT_ARGB32,
fwidth - (ix + iwidth), 1);
cr = cairo_create(output->gl.border.right);
cairo_translate(cr, -(iwidth + ix), -iy);
frame_repaint(output->frame, cr);
cairo_destroy(cr);
gl_renderer->output_set_border(&output->base, GL_RENDERER_BORDER_RIGHT,
fwidth - (ix + iwidth), 1,
cairo_image_surface_get_stride(output->gl.border.right) / 4,
cairo_image_surface_get_data(output->gl.border.right));
if (!output->gl.border.bottom)
output->gl.border.bottom =
cairo_image_surface_create(CAIRO_FORMAT_ARGB32,
fwidth, fheight - (iy + iheight));
cr = cairo_create(output->gl.border.bottom);
cairo_translate(cr, 0, -(iy + iheight));
frame_repaint(output->frame, cr);
cairo_destroy(cr);
gl_renderer->output_set_border(&output->base, GL_RENDERER_BORDER_BOTTOM,
fwidth, fheight - (iy + iheight),
cairo_image_surface_get_stride(output->gl.border.bottom) / 4,
cairo_image_surface_get_data(output->gl.border.bottom));
}
#endif
static int
wayland_output_start_repaint_loop(struct weston_output *output_base)
{
struct wayland_output *output = to_wayland_output(output_base);
struct wayland_backend *wb;
assert(output);
wb = to_wayland_backend(output->base.compositor);
/* If this is the initial frame, we need to attach a buffer so that
* the compositor can map the surface and include it in its render
* loop. If the surface doesn't end up in the render loop, the frame
* callback won't be invoked. The buffer is transparent and of the
* same size as the future real output buffer. */
if (output->parent.draw_initial_frame) {
output->parent.draw_initial_frame = false;
draw_initial_frame(output);
}
output->frame_cb = wl_surface_frame(output->parent.surface);
wl_callback_add_listener(output->frame_cb, &frame_listener, output);
wl_surface_commit(output->parent.surface);
wl_display_flush(wb->parent.wl_display);
return 0;
}
#ifdef ENABLE_EGL
static int
wayland_output_repaint_gl(struct weston_output *output_base,
pixman_region32_t *damage)
{
struct wayland_output *output = to_wayland_output(output_base);
struct weston_compositor *ec;
assert(output);
ec = output->base.compositor;
output->frame_cb = wl_surface_frame(output->parent.surface);
wl_callback_add_listener(output->frame_cb, &frame_listener, output);
wayland_output_update_gl_border(output);
ec->renderer->repaint_output(&output->base, damage);
pixman_region32_subtract(&ec->primary_plane.damage,
&ec->primary_plane.damage, damage);
return 0;
}
#endif
static void
wayland_output_update_shm_border(struct wayland_shm_buffer *buffer)
{
int32_t ix, iy, iwidth, iheight, fwidth, fheight;
cairo_t *cr;
if (!buffer->output->frame || !buffer->frame_damaged)
return;
cr = cairo_create(buffer->c_surface);
frame_interior(buffer->output->frame, &ix, &iy, &iwidth, &iheight);
fwidth = frame_width(buffer->output->frame);
fheight = frame_height(buffer->output->frame);
/* Set the clip so we don't unnecisaraly damage the surface */
cairo_move_to(cr, ix, iy);
cairo_rel_line_to(cr, iwidth, 0);
cairo_rel_line_to(cr, 0, iheight);
cairo_rel_line_to(cr, -iwidth, 0);
cairo_line_to(cr, ix, iy);
cairo_line_to(cr, 0, iy);
cairo_line_to(cr, 0, fheight);
cairo_line_to(cr, fwidth, fheight);
cairo_line_to(cr, fwidth, 0);
cairo_line_to(cr, 0, 0);
cairo_line_to(cr, 0, iy);
cairo_close_path(cr);
cairo_clip(cr);
/* Draw using a pattern so that the final result gets clipped */
cairo_push_group(cr);
frame_repaint(buffer->output->frame, cr);
cairo_pop_group_to_source(cr);
cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
cairo_paint(cr);
cairo_destroy(cr);
}
static void
wayland_shm_buffer_attach(struct wayland_shm_buffer *sb)
{
pixman_region32_t damage;
pixman_box32_t *rects;
int32_t ix, iy, iwidth, iheight, fwidth, fheight;
int i, n;
pixman_region32_init(&damage);
pixman_region32_copy(&damage, &sb->damage);
pixman_region32_translate(&damage, -sb->output->base.x,
-sb->output->base.y);
weston_transformed_region(sb->output->base.width,
sb->output->base.height,
sb->output->base.transform,
sb->output->base.current_scale,
&damage, &damage);
if (sb->output->frame) {
frame_interior(sb->output->frame, &ix, &iy, &iwidth, &iheight);
fwidth = frame_width(sb->output->frame);
fheight = frame_height(sb->output->frame);
pixman_region32_translate(&damage, ix, iy);
if (sb->frame_damaged) {
pixman_region32_union_rect(&damage, &damage,
0, 0, fwidth, iy);
pixman_region32_union_rect(&damage, &damage,
0, iy, ix, iheight);
pixman_region32_union_rect(&damage, &damage,
ix + iwidth, iy,
fwidth - (ix + iwidth), iheight);
pixman_region32_union_rect(&damage, &damage,
0, iy + iheight,
fwidth, fheight - (iy + iheight));
}
}
rects = pixman_region32_rectangles(&damage, &n);
wl_surface_attach(sb->output->parent.surface, sb->buffer, 0, 0);
for (i = 0; i < n; ++i)
wl_surface_damage(sb->output->parent.surface, rects[i].x1,
rects[i].y1, rects[i].x2 - rects[i].x1,
rects[i].y2 - rects[i].y1);
if (sb->output->frame)
pixman_region32_fini(&damage);
}
static int
wayland_output_repaint_pixman(struct weston_output *output_base,
pixman_region32_t *damage)
{
struct wayland_output *output = to_wayland_output(output_base);
struct wayland_backend *b;
struct wayland_shm_buffer *sb;
assert(output);
b = to_wayland_backend(output->base.compositor);
if (output->frame) {
if (frame_status(output->frame) & FRAME_STATUS_REPAINT)
wl_list_for_each(sb, &output->shm.buffers, link)
sb->frame_damaged = 1;
}
wl_list_for_each(sb, &output->shm.buffers, link)
pixman_region32_union(&sb->damage, &sb->damage, damage);
sb = wayland_output_get_shm_buffer(output);
wayland_output_update_shm_border(sb);
pixman_renderer_output_set_buffer(output_base, sb->pm_image);
b->compositor->renderer->repaint_output(output_base, &sb->damage);
wayland_shm_buffer_attach(sb);
output->frame_cb = wl_surface_frame(output->parent.surface);
wl_callback_add_listener(output->frame_cb, &frame_listener, output);
wl_surface_commit(output->parent.surface);
wl_display_flush(b->parent.wl_display);
pixman_region32_fini(&sb->damage);
pixman_region32_init(&sb->damage);
sb->frame_damaged = 0;
pixman_region32_subtract(&b->compositor->primary_plane.damage,
&b->compositor->primary_plane.damage, damage);
return 0;
}
static void
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
wayland_backend_destroy_output_surface(struct wayland_output *output)
{
assert(output->parent.surface);
if (output->parent.xdg_toplevel) {
xdg_toplevel_destroy(output->parent.xdg_toplevel);
output->parent.xdg_toplevel = NULL;
}
if (output->parent.xdg_surface) {
xdg_surface_destroy(output->parent.xdg_surface);
output->parent.xdg_surface = NULL;
}
if (output->parent.shell_surface) {
wl_shell_surface_destroy(output->parent.shell_surface);
output->parent.shell_surface = NULL;
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
wl_surface_destroy(output->parent.surface);
output->parent.surface = NULL;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
}
static void
wayland_output_destroy_shm_buffers(struct wayland_output *output)
{
struct wayland_shm_buffer *buffer, *next;
/* Throw away any remaining SHM buffers */
wl_list_for_each_safe(buffer, next, &output->shm.free_buffers, free_link)
wayland_shm_buffer_destroy(buffer);
/* These will get thrown away when they get released */
wl_list_for_each(buffer, &output->shm.buffers, link)
buffer->output = NULL;
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
static int
wayland_output_disable(struct weston_output *base)
{
struct wayland_output *output = to_wayland_output(base);
struct wayland_backend *b;
assert(output);
b = to_wayland_backend(base->compositor);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
if (!output->base.enabled)
return 0;
if (b->use_pixman) {
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
pixman_renderer_output_destroy(&output->base);
#ifdef ENABLE_EGL
} else {
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
gl_renderer->output_destroy(&output->base);
wl_egl_window_destroy(output->gl.egl_window);
#endif
}
wayland_output_destroy_shm_buffers(output);
wayland_backend_destroy_output_surface(output);
if (output->frame)
frame_destroy(output->frame);
cairo_surface_destroy(output->gl.border.top);
cairo_surface_destroy(output->gl.border.left);
cairo_surface_destroy(output->gl.border.right);
cairo_surface_destroy(output->gl.border.bottom);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return 0;
}
static void
wayland_output_destroy(struct weston_output *base)
{
struct wayland_output *output = to_wayland_output(base);
assert(output);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
wayland_output_disable(&output->base);
weston_output_release(&output->base);
if (output->frame_cb)
wl_callback_destroy(output->frame_cb);
free(output->title);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
free(output);
}
static const struct wl_shell_surface_listener shell_surface_listener;
#ifdef ENABLE_EGL
static int
wayland_output_init_gl_renderer(struct wayland_output *output)
{
int32_t fwidth = 0, fheight = 0;
struct gl_renderer_output_options options = {
.drm_formats = wayland_formats,
.drm_formats_count = ARRAY_LENGTH(wayland_formats),
};
if (output->frame) {
fwidth = frame_width(output->frame);
fheight = frame_height(output->frame);
} else {
fwidth = output->base.current_mode->width;
fheight = output->base.current_mode->height;
}
output->gl.egl_window =
wl_egl_window_create(output->parent.surface,
fwidth, fheight);
if (!output->gl.egl_window) {
weston_log("failure to create wl_egl_window\n");
return -1;
}
options.window_for_legacy = output->gl.egl_window;
options.window_for_platform = output->gl.egl_window;
if (gl_renderer->output_window_create(&output->base, &options) < 0)
goto cleanup_window;
return 0;
cleanup_window:
wl_egl_window_destroy(output->gl.egl_window);
return -1;
}
#endif
static int
wayland_output_init_pixman_renderer(struct wayland_output *output)
{
const struct pixman_renderer_output_options options = {
.use_shadow = true,
};
return pixman_renderer_output_create(&output->base, &options);
}
static void
wayland_output_resize_surface(struct wayland_output *output)
{
struct wayland_backend *b =
to_wayland_backend(output->base.compositor);
int32_t ix, iy, iwidth, iheight;
int32_t width, height;
struct wl_region *region;
width = output->base.current_mode->width;
height = output->base.current_mode->height;
if (output->frame) {
frame_resize_inside(output->frame, width, height);
frame_input_rect(output->frame, &ix, &iy, &iwidth, &iheight);
region = wl_compositor_create_region(b->parent.compositor);
wl_region_add(region, ix, iy, iwidth, iheight);
wl_surface_set_input_region(output->parent.surface, region);
wl_region_destroy(region);
if (output->parent.xdg_surface) {
xdg_surface_set_window_geometry(output->parent.xdg_surface,
ix,
iy,
iwidth,
iheight);
}
frame_opaque_rect(output->frame, &ix, &iy, &iwidth, &iheight);
region = wl_compositor_create_region(b->parent.compositor);
wl_region_add(region, ix, iy, iwidth, iheight);
wl_surface_set_opaque_region(output->parent.surface, region);
wl_region_destroy(region);
width = frame_width(output->frame);
height = frame_height(output->frame);
} else {
region = wl_compositor_create_region(b->parent.compositor);
wl_region_add(region, 0, 0, width, height);
wl_surface_set_input_region(output->parent.surface, region);
wl_region_destroy(region);
region = wl_compositor_create_region(b->parent.compositor);
wl_region_add(region, 0, 0, width, height);
wl_surface_set_opaque_region(output->parent.surface, region);
wl_region_destroy(region);
if (output->parent.xdg_surface) {
xdg_surface_set_window_geometry(output->parent.xdg_surface,
0,
0,
width,
height);
}
}
#ifdef ENABLE_EGL
if (output->gl.egl_window) {
wl_egl_window_resize(output->gl.egl_window,
width, height, 0, 0);
/* These will need to be re-created due to the resize */
gl_renderer->output_set_border(&output->base,
GL_RENDERER_BORDER_TOP,
0, 0, 0, NULL);
cairo_surface_destroy(output->gl.border.top);
output->gl.border.top = NULL;
gl_renderer->output_set_border(&output->base,
GL_RENDERER_BORDER_LEFT,
0, 0, 0, NULL);
cairo_surface_destroy(output->gl.border.left);
output->gl.border.left = NULL;
gl_renderer->output_set_border(&output->base,
GL_RENDERER_BORDER_RIGHT,
0, 0, 0, NULL);
cairo_surface_destroy(output->gl.border.right);
output->gl.border.right = NULL;
gl_renderer->output_set_border(&output->base,
GL_RENDERER_BORDER_BOTTOM,
0, 0, 0, NULL);
cairo_surface_destroy(output->gl.border.bottom);
output->gl.border.bottom = NULL;
}
#endif
wayland_output_destroy_shm_buffers(output);
}
static int
wayland_output_set_windowed(struct wayland_output *output)
{
struct wayland_backend *b =
to_wayland_backend(output->base.compositor);
if (output->frame)
return 0;
if (!b->theme) {
b->theme = theme_create();
if (!b->theme)
return -1;
}
output->frame = frame_create(b->theme, 100, 100,
FRAME_BUTTON_CLOSE, output->title, NULL);
if (!output->frame)
return -1;
if (output->keyboard_count)
frame_set_flag(output->frame, FRAME_FLAG_ACTIVE);
wayland_output_resize_surface(output);
if (output->parent.xdg_toplevel) {
xdg_toplevel_unset_fullscreen(output->parent.xdg_toplevel);
} else if (output->parent.shell_surface) {
wl_shell_surface_set_toplevel(output->parent.shell_surface);
} else {
abort();
}
return 0;
}
static void
wayland_output_set_fullscreen(struct wayland_output *output,
enum wl_shell_surface_fullscreen_method method,
uint32_t framerate, struct wl_output *target)
{
if (output->frame) {
frame_destroy(output->frame);
output->frame = NULL;
}
wayland_output_resize_surface(output);
if (output->parent.xdg_toplevel) {
xdg_toplevel_set_fullscreen(output->parent.xdg_toplevel, target);
} else if (output->parent.shell_surface) {
wl_shell_surface_set_fullscreen(output->parent.shell_surface,
method, framerate, target);
} else {
abort();
}
}
static struct weston_mode *
wayland_output_choose_mode(struct wayland_output *output,
struct weston_mode *ref_mode)
{
struct weston_mode *mode;
/* First look for an exact match */
wl_list_for_each(mode, &output->base.mode_list, link)
if (mode->width == ref_mode->width &&
mode->height == ref_mode->height &&
mode->refresh == ref_mode->refresh)
return mode;
/* If we can't find an exact match, ignore refresh and try again */
wl_list_for_each(mode, &output->base.mode_list, link)
if (mode->width == ref_mode->width &&
mode->height == ref_mode->height)
return mode;
/* Yeah, we failed */
return NULL;
}
enum mode_status {
MODE_STATUS_UNKNOWN,
MODE_STATUS_SUCCESS,
MODE_STATUS_FAIL,
MODE_STATUS_CANCEL,
};
static void
mode_feedback_successful(void *data,
struct zwp_fullscreen_shell_mode_feedback_v1 *fb)
{
enum mode_status *value = data;
printf("Mode switch successful\n");
*value = MODE_STATUS_SUCCESS;
}
static void
mode_feedback_failed(void *data, struct zwp_fullscreen_shell_mode_feedback_v1 *fb)
{
enum mode_status *value = data;
printf("Mode switch failed\n");
*value = MODE_STATUS_FAIL;
}
static void
mode_feedback_cancelled(void *data, struct zwp_fullscreen_shell_mode_feedback_v1 *fb)
{
enum mode_status *value = data;
printf("Mode switch cancelled\n");
*value = MODE_STATUS_CANCEL;
}
struct zwp_fullscreen_shell_mode_feedback_v1_listener mode_feedback_listener = {
mode_feedback_successful,
mode_feedback_failed,
mode_feedback_cancelled,
};
static enum mode_status
wayland_output_fullscreen_shell_mode_feedback(struct wayland_output *output,
struct weston_mode *mode)
{
struct wayland_backend *b = to_wayland_backend(output->base.compositor);
struct zwp_fullscreen_shell_mode_feedback_v1 *mode_feedback;
enum mode_status mode_status;
int ret = 0;
mode_feedback =
zwp_fullscreen_shell_v1_present_surface_for_mode(b->parent.fshell,
output->parent.surface,
output->parent.output,
mode->refresh);
zwp_fullscreen_shell_mode_feedback_v1_add_listener(mode_feedback,
&mode_feedback_listener,
&mode_status);
output->parent.draw_initial_frame = false;
draw_initial_frame(output);
wl_surface_commit(output->parent.surface);
mode_status = MODE_STATUS_UNKNOWN;
while (mode_status == MODE_STATUS_UNKNOWN && ret >= 0)
ret = wl_display_dispatch(b->parent.wl_display);
zwp_fullscreen_shell_mode_feedback_v1_destroy(mode_feedback);
return mode_status;
}
static int
wayland_output_switch_mode(struct weston_output *output_base,
struct weston_mode *mode)
{
struct wayland_output *output;
struct wayland_backend *b;
struct wl_surface *old_surface;
struct weston_mode *old_mode;
enum mode_status mode_status;
if (output_base == NULL) {
weston_log("output is NULL.\n");
return -1;
}
output = to_wayland_output(output_base);
assert(output);
if (mode == NULL) {
weston_log("mode is NULL.\n");
return -1;
}
b = to_wayland_backend(output_base->compositor);
if (output->parent.xdg_surface || output->parent.shell_surface || !b->parent.fshell)
return -1;
mode = wayland_output_choose_mode(output, mode);
if (mode == NULL)
return -1;
if (output->base.current_mode == mode)
return 0;
old_mode = output->base.current_mode;
old_surface = output->parent.surface;
output->base.current_mode = mode;
output->parent.surface =
wl_compositor_create_surface(b->parent.compositor);
wl_surface_set_user_data(output->parent.surface, output);
/* Blow the old buffers because we changed size/surfaces */
wayland_output_resize_surface(output);
mode_status = wayland_output_fullscreen_shell_mode_feedback(output, mode);
/* This should kick-start things again */
wayland_output_start_repaint_loop(&output->base);
if (mode_status == MODE_STATUS_FAIL) {
output->base.current_mode = old_mode;
wl_surface_destroy(output->parent.surface);
output->parent.surface = old_surface;
wayland_output_resize_surface(output);
return -1;
}
old_mode->flags &= ~WL_OUTPUT_MODE_CURRENT;
output->base.current_mode->flags |= WL_OUTPUT_MODE_CURRENT;
if (b->use_pixman) {
pixman_renderer_output_destroy(output_base);
if (wayland_output_init_pixman_renderer(output) < 0)
goto err_output;
#ifdef ENABLE_EGL
} else {
gl_renderer->output_destroy(output_base);
wl_egl_window_destroy(output->gl.egl_window);
if (wayland_output_init_gl_renderer(output) < 0)
goto err_output;
#endif
}
wl_surface_destroy(old_surface);
weston_output_schedule_repaint(&output->base);
return 0;
err_output:
/* XXX */
return -1;
}
static void
handle_xdg_surface_configure(void *data, struct xdg_surface *surface,
uint32_t serial)
{
xdg_surface_ack_configure(surface, serial);
}
static const struct xdg_surface_listener xdg_surface_listener = {
handle_xdg_surface_configure
};
static void
handle_xdg_toplevel_configure(void *data, struct xdg_toplevel *toplevel,
int32_t width, int32_t height,
struct wl_array *states)
{
struct wayland_output *output = data;
output->parent.configure_width = width;
output->parent.configure_height = height;
output->parent.wait_for_configure = false;
/* FIXME: implement resizing */
}
static void
handle_xdg_toplevel_close(void *data, struct xdg_toplevel *xdg_toplevel)
{
struct wayland_output *output = data;
struct weston_compositor *compositor = output->base.compositor;
wayland_output_destroy(&output->base);
if (wl_list_empty(&compositor->output_list))
weston_compositor_exit(compositor);
}
static const struct xdg_toplevel_listener xdg_toplevel_listener = {
handle_xdg_toplevel_configure,
handle_xdg_toplevel_close,
};
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
static int
wayland_backend_create_output_surface(struct wayland_output *output)
{
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
struct wayland_backend *b = to_wayland_backend(output->base.compositor);
assert(!output->parent.surface);
output->parent.surface =
wl_compositor_create_surface(b->parent.compositor);
if (!output->parent.surface)
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return -1;
wl_surface_set_user_data(output->parent.surface, output);
output->parent.draw_initial_frame = true;
if (b->parent.xdg_wm_base) {
output->parent.xdg_surface =
xdg_wm_base_get_xdg_surface(b->parent.xdg_wm_base,
output->parent.surface);
xdg_surface_add_listener(output->parent.xdg_surface,
&xdg_surface_listener, output);
output->parent.xdg_toplevel =
xdg_surface_get_toplevel(output->parent.xdg_surface);
xdg_toplevel_add_listener(output->parent.xdg_toplevel,
&xdg_toplevel_listener, output);
xdg_toplevel_set_title(output->parent.xdg_toplevel, output->title);
wl_surface_commit(output->parent.surface);
output->parent.wait_for_configure = true;
while (output->parent.wait_for_configure)
wl_display_dispatch(b->parent.wl_display);
weston_log("wayland-backend: Using xdg_wm_base\n");
}
else if (b->parent.shell) {
output->parent.shell_surface =
wl_shell_get_shell_surface(b->parent.shell,
output->parent.surface);
if (!output->parent.shell_surface) {
wl_surface_destroy(output->parent.surface);
return -1;
}
wl_shell_surface_add_listener(output->parent.shell_surface,
&shell_surface_listener, output);
weston_log("wayland-backend: Using wl_shell\n");
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return 0;
}
static int
wayland_output_enable(struct weston_output *base)
{
struct wayland_output *output = to_wayland_output(base);
struct wayland_backend *b;
enum mode_status mode_status;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
int ret = 0;
assert(output);
b = to_wayland_backend(base->compositor);
wl_list_init(&output->shm.buffers);
wl_list_init(&output->shm.free_buffers);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
weston_log("Creating %dx%d wayland output at (%d, %d)\n",
output->base.current_mode->width,
output->base.current_mode->height,
output->base.x, output->base.y);
if (!output->parent.surface)
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
ret = wayland_backend_create_output_surface(output);
if (ret < 0)
return -1;
if (b->use_pixman) {
if (wayland_output_init_pixman_renderer(output) < 0)
goto err_output;
output->base.repaint = wayland_output_repaint_pixman;
#ifdef ENABLE_EGL
} else {
if (wayland_output_init_gl_renderer(output) < 0)
goto err_output;
output->base.repaint = wayland_output_repaint_gl;
#endif
}
output->base.start_repaint_loop = wayland_output_start_repaint_loop;
output->base.assign_planes = NULL;
output->base.set_backlight = NULL;
output->base.set_dpms = NULL;
output->base.switch_mode = wayland_output_switch_mode;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
if (b->sprawl_across_outputs) {
if (b->parent.fshell) {
wayland_output_resize_surface(output);
mode_status = wayland_output_fullscreen_shell_mode_feedback(output, &output->mode);
if (mode_status == MODE_STATUS_FAIL) {
zwp_fullscreen_shell_v1_present_surface(b->parent.fshell,
output->parent.surface,
ZWP_FULLSCREEN_SHELL_V1_PRESENT_METHOD_CENTER,
output->parent.output);
output->parent.draw_initial_frame = true;
}
} else {
wayland_output_set_fullscreen(output,
WL_SHELL_SURFACE_FULLSCREEN_METHOD_DRIVER,
output->mode.refresh, output->parent.output);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
}
} else if (b->fullscreen) {
wayland_output_set_fullscreen(output, 0, 0, NULL);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
} else {
wayland_output_set_windowed(output);
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return 0;
err_output:
wayland_backend_destroy_output_surface(output);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return -1;
}
static int
wayland_output_setup_for_parent_output(struct wayland_output *output,
struct wayland_parent_output *poutput);
static int
wayland_output_setup_fullscreen(struct wayland_output *output,
struct wayland_head *head);
static int
wayland_output_attach_head(struct weston_output *output_base,
struct weston_head *head_base)
{
struct wayland_output *output = to_wayland_output(output_base);
struct wayland_head *head = to_wayland_head(head_base);
struct wayland_backend *b;
assert(output);
if (!head)
return -1;
b = to_wayland_backend(output_base->compositor);
if (!wl_list_empty(&output->base.head_list))
return -1;
if (head->parent_output) {
if (wayland_output_setup_for_parent_output(output,
head->parent_output) < 0)
return -1;
} else if (b->fullscreen) {
if (wayland_output_setup_fullscreen(output, head) < 0)
return -1;
} else {
/* A floating window, nothing to do. */
}
return 0;
}
static void
wayland_output_detach_head(struct weston_output *output_base,
struct weston_head *head)
{
struct wayland_output *output = to_wayland_output(output_base);
assert(output);
/* Rely on the disable hook if the output was enabled. We do not
* support cloned heads, so detaching is guaranteed to disable the
* output.
*/
if (output->base.enabled)
return;
/* undo setup fullscreen */
if (output->parent.surface)
wayland_backend_destroy_output_surface(output);
}
static struct weston_output *
wayland_output_create(struct weston_compositor *compositor, const char *name)
{
struct wayland_output *output;
char *title;
/* name can't be NULL. */
assert(name);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
output = zalloc(sizeof *output);
if (output == NULL) {
perror("zalloc");
return NULL;
}
if (asprintf(&title, "%s - %s", WINDOW_TITLE, name) < 0) {
free(output);
return NULL;
}
output->title = title;
weston_output_init(&output->base, compositor, name);
output->base.destroy = wayland_output_destroy;
output->base.disable = wayland_output_disable;
output->base.enable = wayland_output_enable;
output->base.attach_head = wayland_output_attach_head;
output->base.detach_head = wayland_output_detach_head;
weston_compositor_add_pending_output(&output->base, compositor);
return &output->base;
}
static struct wayland_head *
wayland_head_create(struct weston_compositor *compositor, const char *name)
{
struct wayland_head *head;
assert(name);
head = zalloc(sizeof *head);
if (!head)
return NULL;
weston_head_init(&head->base, name);
head->base.backend_id = wayland_head_destroy;
weston_head_set_connection_status(&head->base, true);
weston_compositor_add_head(compositor, &head->base);
return head;
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
static int
wayland_head_create_windowed(struct weston_compositor *compositor,
const char *name)
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
{
if (!wayland_head_create(compositor, name))
return -1;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return 0;
}
static int
wayland_head_create_for_parent_output(struct weston_compositor *compositor,
struct wayland_parent_output *poutput)
{
struct wayland_head *head;
char name[100];
int ret;
ret = snprintf(name, sizeof(name), "wlparent-%d", poutput->id);
if (ret < 1 || (unsigned)ret >= sizeof(name))
return -1;
head = wayland_head_create(compositor, name);
if (!head)
return -1;
assert(!poutput->head);
head->parent_output = poutput;
poutput->head = head;
weston_head_set_monitor_strings(&head->base,
poutput->physical.make,
poutput->physical.model, NULL);
weston_head_set_physical_size(&head->base,
poutput->physical.width,
poutput->physical.height);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return 0;
}
static void
wayland_head_destroy(struct weston_head *base)
{
struct wayland_head *head = to_wayland_head(base);
assert(head);
if (head->parent_output)
head->parent_output->head = NULL;
weston_head_release(&head->base);
free(head);
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
static int
wayland_output_set_size(struct weston_output *base, int width, int height)
{
struct wayland_output *output = to_wayland_output(base);
struct weston_head *head;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
int output_width, output_height;
if (!output)
return -1;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
/* We can only be called once. */
assert(!output->base.current_mode);
/* Make sure we have scale set. */
assert(output->base.scale);
if (width < 1) {
weston_log("Invalid width \"%d\" for output %s\n",
width, output->base.name);
return -1;
}
if (height < 1) {
weston_log("Invalid height \"%d\" for output %s\n",
height, output->base.name);
return -1;
}
wl_list_for_each(head, &output->base.head_list, output_link) {
weston_head_set_monitor_strings(head, "wayland", "none", NULL);
/* XXX: Calculate proper size. */
weston_head_set_physical_size(head, width, height);
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
output_width = width * output->base.scale;
output_height = height * output->base.scale;
output->mode.flags =
WL_OUTPUT_MODE_CURRENT | WL_OUTPUT_MODE_PREFERRED;
output->mode.width = output_width;
output->mode.height = output_height;
output->mode.refresh = 60000;
wl_list_insert(&output->base.mode_list, &output->mode.link);
output->base.current_mode = &output->mode;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return 0;
}
static int
wayland_output_setup_for_parent_output(struct wayland_output *output,
struct wayland_parent_output *poutput)
{
struct weston_mode *mode;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
if (poutput->current_mode) {
mode = poutput->current_mode;
} else if (poutput->preferred_mode) {
mode = poutput->preferred_mode;
} else if (!wl_list_empty(&poutput->mode_list)) {
mode = container_of(poutput->mode_list.next,
struct weston_mode, link);
} else {
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
weston_log("No valid modes found. Skipping output.\n");
return -1;
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
output->base.scale = 1;
output->base.transform = WL_OUTPUT_TRANSFORM_NORMAL;
output->parent.output = poutput->global;
wl_list_insert_list(&output->base.mode_list, &poutput->mode_list);
wl_list_init(&poutput->mode_list);
/* No other mode should have CURRENT already. */
mode->flags |= WL_OUTPUT_MODE_CURRENT;
output->base.current_mode = mode;
/* output->mode is unused in this path. */
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return 0;
}
static int
wayland_output_setup_fullscreen(struct wayland_output *output,
struct wayland_head *head)
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
{
struct wayland_backend *b = to_wayland_backend(output->base.compositor);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
int width = 0, height = 0;
output->base.scale = 1;
output->base.transform = WL_OUTPUT_TRANSFORM_NORMAL;
if (wayland_backend_create_output_surface(output) < 0)
return -1;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
/* What should size be set if conditional is false? */
if (b->parent.xdg_wm_base || b->parent.shell) {
if (output->parent.xdg_toplevel)
xdg_toplevel_set_fullscreen(output->parent.xdg_toplevel,
output->parent.output);
else if (output->parent.shell_surface)
wl_shell_surface_set_fullscreen(output->parent.shell_surface,
0, 0, NULL);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
wl_display_roundtrip(b->parent.wl_display);
width = output->parent.configure_width;
height = output->parent.configure_height;
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
if (wayland_output_set_size(&output->base, width, height) < 0)
goto err_set_size;
/* The head is not attached yet, so set_size did not set these. */
weston_head_set_monitor_strings(&head->base, "wayland", "none", NULL);
/* XXX: Calculate proper size. */
weston_head_set_physical_size(&head->base, width, height);
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
return 0;
err_set_size:
wayland_backend_destroy_output_surface(output);
return -1;
}
static void
shell_surface_ping(void *data, struct wl_shell_surface *shell_surface,
uint32_t serial)
{
wl_shell_surface_pong(shell_surface, serial);
}
static void
shell_surface_configure(void *data, struct wl_shell_surface *shell_surface,
uint32_t edges, int32_t width, int32_t height)
{
struct wayland_output *output = data;
output->parent.configure_width = width;
output->parent.configure_height = height;
/* FIXME: implement resizing */
}
static void
shell_surface_popup_done(void *data, struct wl_shell_surface *shell_surface)
{
}
static const struct wl_shell_surface_listener shell_surface_listener = {
shell_surface_ping,
shell_surface_configure,
shell_surface_popup_done
};
/* Events received from the wayland-server this compositor is client of: */
/* parent input interface */
static void
input_set_cursor(struct wayland_input *input)
{
struct wl_buffer *buffer;
struct wl_cursor_image *image;
if (!input->backend->cursor)
return; /* Couldn't load the cursor. Can't set it */
image = input->backend->cursor->images[0];
buffer = wl_cursor_image_get_buffer(image);
if (!buffer)
return;
wl_pointer_set_cursor(input->parent.pointer, input->enter_serial,
input->parent.cursor.surface,
image->hotspot_x, image->hotspot_y);
wl_surface_attach(input->parent.cursor.surface, buffer, 0, 0);
wl_surface_damage(input->parent.cursor.surface, 0, 0,
image->width, image->height);
wl_surface_commit(input->parent.cursor.surface);
}
static void
input_handle_pointer_enter(void *data, struct wl_pointer *pointer,
uint32_t serial, struct wl_surface *surface,
wl_fixed_t fixed_x, wl_fixed_t fixed_y)
{
struct wayland_input *input = data;
int32_t fx, fy;
enum theme_location location;
double x, y;
if (!surface) {
input->output = NULL;
input->has_focus = false;
notify_pointer_focus(&input->base, NULL, 0, 0);
return;
}
x = wl_fixed_to_double(fixed_x);
y = wl_fixed_to_double(fixed_y);
/* XXX: If we get a modifier event immediately before the focus,
* we should try to keep the same serial. */
input->enter_serial = serial;
input->output = wl_surface_get_user_data(surface);
if (input->output->frame) {
location = frame_pointer_enter(input->output->frame, input,
x, y);
frame_interior(input->output->frame, &fx, &fy, NULL, NULL);
x -= fx;
y -= fy;
if (frame_status(input->output->frame) & FRAME_STATUS_REPAINT)
weston_output_schedule_repaint(&input->output->base);
} else {
location = THEME_LOCATION_CLIENT_AREA;
}
weston_output_transform_coordinate(&input->output->base, x, y, &x, &y);
if (location == THEME_LOCATION_CLIENT_AREA) {
input->has_focus = true;
notify_pointer_focus(&input->base, &input->output->base, x, y);
wl_pointer_set_cursor(input->parent.pointer,
input->enter_serial, NULL, 0, 0);
} else {
input->has_focus = false;
notify_pointer_focus(&input->base, NULL, 0, 0);
input_set_cursor(input);
}
}
static void
input_handle_pointer_leave(void *data, struct wl_pointer *pointer,
uint32_t serial, struct wl_surface *surface)
{
struct wayland_input *input = data;
if (!input->output)
return;
if (input->output->frame) {
frame_pointer_leave(input->output->frame, input);
if (frame_status(input->output->frame) & FRAME_STATUS_REPAINT)
weston_output_schedule_repaint(&input->output->base);
}
notify_pointer_focus(&input->base, NULL, 0, 0);
input->output = NULL;
input->has_focus = false;
}
static void
input_handle_motion(void *data, struct wl_pointer *pointer,
uint32_t time, wl_fixed_t fixed_x, wl_fixed_t fixed_y)
{
struct wayland_input *input = data;
int32_t fx, fy;
enum theme_location location;
bool want_frame = false;
double x, y;
struct timespec ts;
if (!input->output)
return;
x = wl_fixed_to_double(fixed_x);
y = wl_fixed_to_double(fixed_y);
if (input->output->frame) {
location = frame_pointer_motion(input->output->frame, input,
x, y);
frame_interior(input->output->frame, &fx, &fy, NULL, NULL);
x -= fx;
y -= fy;
if (frame_status(input->output->frame) & FRAME_STATUS_REPAINT)
weston_output_schedule_repaint(&input->output->base);
} else {
location = THEME_LOCATION_CLIENT_AREA;
}
weston_output_transform_coordinate(&input->output->base, x, y, &x, &y);
if (input->has_focus && location != THEME_LOCATION_CLIENT_AREA) {
input_set_cursor(input);
notify_pointer_focus(&input->base, NULL, 0, 0);
input->has_focus = false;
want_frame = true;
} else if (!input->has_focus &&
location == THEME_LOCATION_CLIENT_AREA) {
wl_pointer_set_cursor(input->parent.pointer,
input->enter_serial, NULL, 0, 0);
notify_pointer_focus(&input->base, &input->output->base, x, y);
input->has_focus = true;
want_frame = true;
}
if (location == THEME_LOCATION_CLIENT_AREA) {
timespec_from_msec(&ts, time);
notify_motion_absolute(&input->base, &ts, x, y);
want_frame = true;
}
if (want_frame && input->seat_version < WL_POINTER_FRAME_SINCE_VERSION)
notify_pointer_frame(&input->base);
}
static void
input_handle_button(void *data, struct wl_pointer *pointer,
uint32_t serial, uint32_t time, uint32_t button,
enum wl_pointer_button_state state)
{
struct wayland_input *input = data;
enum theme_location location;
struct timespec ts;
if (!input->output)
return;
if (input->output->frame) {
location = frame_pointer_button(input->output->frame, input,
button, state);
if (frame_status(input->output->frame) & FRAME_STATUS_MOVE) {
if (input->output->parent.xdg_toplevel)
xdg_toplevel_move(input->output->parent.xdg_toplevel,
input->parent.seat, serial);
else if (input->output->parent.shell_surface)
wl_shell_surface_move(input->output->parent.shell_surface,
input->parent.seat, serial);
frame_status_clear(input->output->frame,
FRAME_STATUS_MOVE);
return;
}
if (frame_status(input->output->frame) & FRAME_STATUS_CLOSE) {
wayland_output_destroy(&input->output->base);
input->output = NULL;
input->keyboard_focus = NULL;
if (wl_list_empty(&input->backend->compositor->output_list))
weston_compositor_exit(input->backend->compositor);
return;
}
if (frame_status(input->output->frame) & FRAME_STATUS_REPAINT)
weston_output_schedule_repaint(&input->output->base);
} else {
location = THEME_LOCATION_CLIENT_AREA;
}
if (location == THEME_LOCATION_CLIENT_AREA) {
timespec_from_msec(&ts, time);
notify_button(&input->base, &ts, button, state);
if (input->seat_version < WL_POINTER_FRAME_SINCE_VERSION)
notify_pointer_frame(&input->base);
}
}
static void
input_handle_axis(void *data, struct wl_pointer *pointer,
uint32_t time, uint32_t axis, wl_fixed_t value)
{
struct wayland_input *input = data;
struct weston_pointer_axis_event weston_event;
struct timespec ts;
weston_event.axis = axis;
weston_event.value = wl_fixed_to_double(value);
weston_event.has_discrete = false;
if (axis == WL_POINTER_AXIS_VERTICAL_SCROLL &&
input->vert.has_discrete) {
weston_event.has_discrete = true;
weston_event.discrete = input->vert.discrete;
input->vert.has_discrete = false;
} else if (axis == WL_POINTER_AXIS_HORIZONTAL_SCROLL &&
input->horiz.has_discrete) {
weston_event.has_discrete = true;
weston_event.discrete = input->horiz.discrete;
input->horiz.has_discrete = false;
}
timespec_from_msec(&ts, time);
notify_axis(&input->base, &ts, &weston_event);
if (input->seat_version < WL_POINTER_FRAME_SINCE_VERSION)
notify_pointer_frame(&input->base);
}
static void
input_handle_frame(void *data, struct wl_pointer *pointer)
{
struct wayland_input *input = data;
notify_pointer_frame(&input->base);
}
static void
input_handle_axis_source(void *data, struct wl_pointer *pointer,
uint32_t source)
{
struct wayland_input *input = data;
notify_axis_source(&input->base, source);
}
static void
input_handle_axis_stop(void *data, struct wl_pointer *pointer,
uint32_t time, uint32_t axis)
{
struct wayland_input *input = data;
struct weston_pointer_axis_event weston_event;
struct timespec ts;
weston_event.axis = axis;
weston_event.value = 0;
timespec_from_msec(&ts, time);
notify_axis(&input->base, &ts, &weston_event);
}
static void
input_handle_axis_discrete(void *data, struct wl_pointer *pointer,
uint32_t axis, int32_t discrete)
{
struct wayland_input *input = data;
if (axis == WL_POINTER_AXIS_VERTICAL_SCROLL) {
input->vert.has_discrete = true;
input->vert.discrete = discrete;
} else if (axis == WL_POINTER_AXIS_HORIZONTAL_SCROLL) {
input->horiz.has_discrete = true;
input->horiz.discrete = discrete;
}
}
static const struct wl_pointer_listener pointer_listener = {
input_handle_pointer_enter,
input_handle_pointer_leave,
input_handle_motion,
input_handle_button,
input_handle_axis,
input_handle_frame,
input_handle_axis_source,
input_handle_axis_stop,
input_handle_axis_discrete,
};
static void
input_handle_keymap(void *data, struct wl_keyboard *keyboard, uint32_t format,
int fd, uint32_t size)
{
struct wayland_input *input = data;
struct xkb_keymap *keymap;
char *map_str;
if (!data) {
close(fd);
return;
}
if (format == WL_KEYBOARD_KEYMAP_FORMAT_XKB_V1) {
map_str = mmap(NULL, size, PROT_READ, MAP_SHARED, fd, 0);
if (map_str == MAP_FAILED) {
weston_log("mmap failed: %s\n", strerror(errno));
goto error;
}
keymap = xkb_keymap_new_from_string(input->backend->compositor->xkb_context,
map_str,
XKB_KEYMAP_FORMAT_TEXT_V1,
0);
munmap(map_str, size);
if (!keymap) {
weston_log("failed to compile keymap\n");
goto error;
}
input->keyboard_state_update = STATE_UPDATE_NONE;
} else if (format == WL_KEYBOARD_KEYMAP_FORMAT_NO_KEYMAP) {
weston_log("No keymap provided; falling back to default\n");
keymap = NULL;
input->keyboard_state_update = STATE_UPDATE_AUTOMATIC;
} else {
weston_log("Invalid keymap\n");
goto error;
}
close(fd);
if (weston_seat_get_keyboard(&input->base))
weston_seat_update_keymap(&input->base, keymap);
else
weston_seat_init_keyboard(&input->base, keymap);
xkb_keymap_unref(keymap);
return;
error:
wl_keyboard_release(input->parent.keyboard);
close(fd);
}
static void
input_handle_keyboard_enter(void *data,
struct wl_keyboard *keyboard,
uint32_t serial,
struct wl_surface *surface,
struct wl_array *keys)
{
struct wayland_input *input = data;
struct wayland_output *focus;
focus = input->keyboard_focus;
if (focus) {
/* This shouldn't happen */
focus->keyboard_count--;
if (!focus->keyboard_count && focus->frame)
frame_unset_flag(focus->frame, FRAME_FLAG_ACTIVE);
if (frame_status(focus->frame) & FRAME_STATUS_REPAINT)
weston_output_schedule_repaint(&focus->base);
}
if (!surface) {
input->keyboard_focus = NULL;
return;
}
input->keyboard_focus = wl_surface_get_user_data(surface);
input->keyboard_focus->keyboard_count++;
focus = input->keyboard_focus;
if (focus->frame) {
frame_set_flag(focus->frame, FRAME_FLAG_ACTIVE);
if (frame_status(focus->frame) & FRAME_STATUS_REPAINT)
weston_output_schedule_repaint(&focus->base);
}
/* XXX: If we get a modifier event immediately before the focus,
* we should try to keep the same serial. */
notify_keyboard_focus_in(&input->base, keys,
STATE_UPDATE_AUTOMATIC);
}
static void
input_handle_keyboard_leave(void *data,
struct wl_keyboard *keyboard,
uint32_t serial,
struct wl_surface *surface)
{
struct wayland_input *input = data;
struct wayland_output *focus;
notify_keyboard_focus_out(&input->base);
focus = input->keyboard_focus;
if (!focus)
return;
focus->keyboard_count--;
if (!focus->keyboard_count && focus->frame) {
frame_unset_flag(focus->frame, FRAME_FLAG_ACTIVE);
if (frame_status(focus->frame) & FRAME_STATUS_REPAINT)
weston_output_schedule_repaint(&focus->base);
}
input->keyboard_focus = NULL;
}
static void
input_handle_key(void *data, struct wl_keyboard *keyboard,
uint32_t serial, uint32_t time, uint32_t key, uint32_t state)
{
struct wayland_input *input = data;
struct timespec ts;
if (!input->keyboard_focus)
return;
timespec_from_msec(&ts, time);
input->key_serial = serial;
notify_key(&input->base, &ts, key,
state ? WL_KEYBOARD_KEY_STATE_PRESSED :
WL_KEYBOARD_KEY_STATE_RELEASED,
input->keyboard_state_update);
}
static void
input_handle_modifiers(void *data, struct wl_keyboard *wl_keyboard,
uint32_t serial_in, uint32_t mods_depressed,
uint32_t mods_latched, uint32_t mods_locked,
uint32_t group)
{
struct weston_keyboard *keyboard;
struct wayland_input *input = data;
struct wayland_backend *b = input->backend;
uint32_t serial_out;
/* If we get a key event followed by a modifier event with the
* same serial number, then we try to preserve those semantics by
* reusing the same serial number on the way out too. */
if (serial_in == input->key_serial)
serial_out = wl_display_get_serial(b->compositor->wl_display);
else
serial_out = wl_display_next_serial(b->compositor->wl_display);
keyboard = weston_seat_get_keyboard(&input->base);
xkb_state_update_mask(keyboard->xkb_state.state,
mods_depressed, mods_latched,
mods_locked, 0, 0, group);
notify_modifiers(&input->base, serial_out);
}
static void
input_handle_repeat_info(void *data, struct wl_keyboard *keyboard,
int32_t rate, int32_t delay)
{
struct wayland_input *input = data;
struct wayland_backend *b = input->backend;
b->compositor->kb_repeat_rate = rate;
b->compositor->kb_repeat_delay = delay;
}
static const struct wl_keyboard_listener keyboard_listener = {
input_handle_keymap,
input_handle_keyboard_enter,
input_handle_keyboard_leave,
input_handle_key,
input_handle_modifiers,
input_handle_repeat_info,
};
static void
input_handle_touch_down(void *data, struct wl_touch *wl_touch,
uint32_t serial, uint32_t time,
struct wl_surface *surface, int32_t id,
wl_fixed_t fixed_x, wl_fixed_t fixed_y)
{
struct wayland_input *input = data;
struct wayland_output *output;
enum theme_location location;
bool first_touch;
int32_t fx, fy;
double x, y;
struct timespec ts;
x = wl_fixed_to_double(fixed_x);
y = wl_fixed_to_double(fixed_y);
timespec_from_msec(&ts, time);
first_touch = (input->touch_points == 0);
input->touch_points++;
input->touch_focus = wl_surface_get_user_data(surface);
output = input->touch_focus;
if (!first_touch && !input->touch_active)
return;
if (output->frame) {
location = frame_touch_down(output->frame, input, id, x, y);
frame_interior(output->frame, &fx, &fy, NULL, NULL);
x -= fx;
y -= fy;
if (frame_status(output->frame) & FRAME_STATUS_REPAINT)
weston_output_schedule_repaint(&output->base);
if (first_touch && (frame_status(output->frame) & FRAME_STATUS_MOVE)) {
input->touch_points--;
if (output->parent.xdg_toplevel)
xdg_toplevel_move(output->parent.xdg_toplevel,
input->parent.seat, serial);
else if (output->parent.shell_surface)
wl_shell_surface_move(output->parent.shell_surface,
input->parent.seat, serial);
frame_status_clear(output->frame,
FRAME_STATUS_MOVE);
return;
}
if (first_touch && location != THEME_LOCATION_CLIENT_AREA)
return;
}
weston_output_transform_coordinate(&output->base, x, y, &x, &y);
notify_touch(input->touch_device, &ts, id, x, y, WL_TOUCH_DOWN);
input->touch_active = true;
}
static void
input_handle_touch_up(void *data, struct wl_touch *wl_touch,
uint32_t serial, uint32_t time, int32_t id)
{
struct wayland_input *input = data;
struct wayland_output *output = input->touch_focus;
bool active = input->touch_active;
struct timespec ts;
timespec_from_msec(&ts, time);
input->touch_points--;
if (!output)
return;
if (output->frame) {
frame_touch_up(output->frame, input, id);
if (frame_status(output->frame) & FRAME_STATUS_CLOSE) {
wayland_output_destroy(&output->base);
input->touch_focus = NULL;
input->keyboard_focus = NULL;
if (wl_list_empty(&input->backend->compositor->output_list))
weston_compositor_exit(input->backend->compositor);
return;
}
if (frame_status(output->frame) & FRAME_STATUS_REPAINT)
weston_output_schedule_repaint(&output->base);
}
if (active)
notify_touch(input->touch_device, &ts, id, 0, 0, WL_TOUCH_UP);
}
static void
input_handle_touch_motion(void *data, struct wl_touch *wl_touch,
uint32_t time, int32_t id,
wl_fixed_t fixed_x, wl_fixed_t fixed_y)
{
struct wayland_input *input = data;
struct wayland_output *output = input->touch_focus;
int32_t fx, fy;
double x, y;
struct timespec ts;
x = wl_fixed_to_double(fixed_x);
y = wl_fixed_to_double(fixed_y);
timespec_from_msec(&ts, time);
if (!output || !input->touch_active)
return;
if (output->frame) {
frame_interior(output->frame, &fx, &fy, NULL, NULL);
x -= fx;
y -= fy;
}
weston_output_transform_coordinate(&output->base, x, y, &x, &y);
notify_touch(input->touch_device, &ts, id, x, y, WL_TOUCH_MOTION);
}
static void
input_handle_touch_frame(void *data, struct wl_touch *wl_touch)
{
struct wayland_input *input = data;
if (!input->touch_focus || !input->touch_active)
return;
notify_touch_frame(input->touch_device);
if (input->touch_points == 0) {
input->touch_focus = NULL;
input->touch_active = false;
}
}
static void
input_handle_touch_cancel(void *data, struct wl_touch *wl_touch)
{
struct wayland_input *input = data;
if (!input->touch_focus || !input->touch_active)
return;
notify_touch_cancel(input->touch_device);
}
static const struct wl_touch_listener touch_listener = {
input_handle_touch_down,
input_handle_touch_up,
input_handle_touch_motion,
input_handle_touch_frame,
input_handle_touch_cancel,
};
7 years ago
static struct weston_touch_device *
create_touch_device(struct wayland_input *input)
{
struct weston_touch_device *touch_device;
char str[128];
/* manufacture a unique'ish name */
snprintf(str, sizeof str, "wayland-touch[%u]",
wl_proxy_get_id((struct wl_proxy *)input->parent.seat));
touch_device = weston_touch_create_touch_device(input->base.touch_state,
str, NULL, NULL);
return touch_device;
}
static void
input_update_capabilities(struct wayland_input *input, enum wl_seat_capability caps)
{
if ((caps & WL_SEAT_CAPABILITY_POINTER) && !input->parent.pointer) {
input->parent.pointer = wl_seat_get_pointer(input->parent.seat);
wl_pointer_set_user_data(input->parent.pointer, input);
wl_pointer_add_listener(input->parent.pointer,
&pointer_listener, input);
weston_seat_init_pointer(&input->base);
} else if (!(caps & WL_SEAT_CAPABILITY_POINTER) && input->parent.pointer) {
if (input->seat_version >= WL_POINTER_RELEASE_SINCE_VERSION)
wl_pointer_release(input->parent.pointer);
else
wl_pointer_destroy(input->parent.pointer);
input->parent.pointer = NULL;
weston_seat_release_pointer(&input->base);
}
if ((caps & WL_SEAT_CAPABILITY_KEYBOARD) && !input->parent.keyboard) {
input->parent.keyboard = wl_seat_get_keyboard(input->parent.seat);
wl_keyboard_set_user_data(input->parent.keyboard, input);
wl_keyboard_add_listener(input->parent.keyboard,
&keyboard_listener, input);
} else if (!(caps & WL_SEAT_CAPABILITY_KEYBOARD) && input->parent.keyboard) {
if (input->seat_version >= WL_KEYBOARD_RELEASE_SINCE_VERSION)
wl_keyboard_release(input->parent.keyboard);
else
wl_keyboard_destroy(input->parent.keyboard);
input->parent.keyboard = NULL;
weston_seat_release_keyboard(&input->base);
}
if ((caps & WL_SEAT_CAPABILITY_TOUCH) && !input->parent.touch) {
input->parent.touch = wl_seat_get_touch(input->parent.seat);
wl_touch_set_user_data(input->parent.touch, input);
wl_touch_add_listener(input->parent.touch,
&touch_listener, input);
weston_seat_init_touch(&input->base);
7 years ago
input->touch_device = create_touch_device(input);
} else if (!(caps & WL_SEAT_CAPABILITY_TOUCH) && input->parent.touch) {
7 years ago
weston_touch_device_destroy(input->touch_device);
input->touch_device = NULL;
if (input->seat_version >= WL_TOUCH_RELEASE_SINCE_VERSION)
wl_touch_release(input->parent.touch);
else
wl_touch_destroy(input->parent.touch);
input->parent.touch = NULL;
weston_seat_release_touch(&input->base);
}
}
static void
input_handle_capabilities(void *data, struct wl_seat *seat,
enum wl_seat_capability caps)
{
struct wayland_input *input = data;
if (input->seat_initialized)
input_update_capabilities(input, caps);
else
input->caps = caps;
}
static void
input_handle_name(void *data, struct wl_seat *seat,
const char *name)
{
struct wayland_input *input = data;
if (!input->seat_initialized) {
assert(!input->name);
input->name = strdup(name);
}
}
static const struct wl_seat_listener seat_listener = {
input_handle_capabilities,
input_handle_name,
};
static void
display_finish_add_seat(void *data, struct wl_callback *wl_callback,
uint32_t callback_data)
{
struct wayland_input *input = data;
char *name;
assert(wl_callback == input->initial_info_cb);
wl_callback_destroy(input->initial_info_cb);
input->initial_info_cb = NULL;
input->seat_initialized = true;
wl_list_remove(&input->link);
wl_list_insert(input->backend->input_list.prev, &input->link);
name = input->name ? input->name : "default";
weston_seat_init(&input->base, input->backend->compositor, name);
free(input->name);
input->name = NULL;
input_update_capabilities(input, input->caps);
/* Because this happens one roundtrip after wl_seat is bound,
* wl_compositor will also have been bound by this time. */
input->parent.cursor.surface =
wl_compositor_create_surface(input->backend->parent.compositor);
input->vert.axis = WL_POINTER_AXIS_VERTICAL_SCROLL;
input->horiz.axis = WL_POINTER_AXIS_HORIZONTAL_SCROLL;
}
static const struct wl_callback_listener seat_callback_listener = {
display_finish_add_seat
};
static void
display_start_add_seat(struct wayland_backend *b, uint32_t id, uint32_t available_version)
{
struct wayland_input *input;
uint32_t version = MIN(available_version, 4);
input = zalloc(sizeof *input);
if (input == NULL)
return;
input->backend = b;
input->parent.seat = wl_registry_bind(b->parent.registry, id,
&wl_seat_interface, version);
input->seat_version = version;
wl_seat_add_listener(input->parent.seat, &seat_listener, input);
wl_seat_set_user_data(input->parent.seat, input);
/* Wait one roundtrip for the compositor to provide the seat name
* and initial capabilities */
input->initial_info_cb = wl_display_sync(b->parent.wl_display);
wl_callback_add_listener(input->initial_info_cb,
&seat_callback_listener, input);
wl_list_insert(input->backend->pending_input_list.prev, &input->link);
}
static void
wayland_input_destroy(struct wayland_input *input)
{
if (input->touch_device)
weston_touch_device_destroy(input->touch_device);
weston_seat_release(&input->base);
if (input->parent.keyboard) {
if (input->seat_version >= WL_KEYBOARD_RELEASE_SINCE_VERSION)
wl_keyboard_release(input->parent.keyboard);
else
wl_keyboard_destroy(input->parent.keyboard);
}
if (input->parent.pointer) {
if (input->seat_version >= WL_POINTER_RELEASE_SINCE_VERSION)
wl_pointer_release(input->parent.pointer);
else
wl_pointer_destroy(input->parent.pointer);
}
if (input->parent.touch) {
if (input->seat_version >= WL_TOUCH_RELEASE_SINCE_VERSION)
wl_touch_release(input->parent.touch);
else
wl_touch_destroy(input->parent.touch);
}
if (input->parent.seat) {
if (input->seat_version >= WL_SEAT_RELEASE_SINCE_VERSION)
wl_seat_release(input->parent.seat);
else
wl_seat_destroy(input->parent.seat);
}
if (input->initial_info_cb)
wl_callback_destroy(input->initial_info_cb);
if (input->parent.cursor.surface)
wl_surface_destroy(input->parent.cursor.surface);
if (input->name)
free(input->name);
free(input);
}
static void
wayland_parent_output_geometry(void *data, struct wl_output *output_proxy,
int32_t x, int32_t y,
int32_t physical_width, int32_t physical_height,
int32_t subpixel, const char *make,
const char *model, int32_t transform)
{
struct wayland_parent_output *output = data;
output->x = x;
output->y = y;
output->physical.width = physical_width;
output->physical.height = physical_height;
output->physical.subpixel = subpixel;
free(output->physical.make);
output->physical.make = strdup(make);
free(output->physical.model);
output->physical.model = strdup(model);
output->transform = transform;
}
static struct weston_mode *
find_mode(struct wl_list *list, int32_t width, int32_t height, uint32_t refresh)
{
struct weston_mode *mode;
wl_list_for_each(mode, list, link) {
if (mode->width == width && mode->height == height &&
mode->refresh == refresh)
return mode;
}
mode = zalloc(sizeof *mode);
if (!mode)
return NULL;
mode->width = width;
mode->height = height;
mode->refresh = refresh;
wl_list_insert(list, &mode->link);
return mode;
}
static struct weston_output *
wayland_parent_output_get_enabled_output(struct wayland_parent_output *poutput)
{
struct wayland_head *head = poutput->head;
if (!head)
return NULL;
if (!weston_head_is_enabled(&head->base))
return NULL;
return weston_head_get_output(&head->base);
}
static void
wayland_parent_output_mode(void *data, struct wl_output *wl_output_proxy,
uint32_t flags, int32_t width, int32_t height,
int32_t refresh)
{
struct wayland_parent_output *output = data;
struct weston_output *enabled_output;
struct weston_mode *mode;
enabled_output = wayland_parent_output_get_enabled_output(output);
if (enabled_output) {
mode = find_mode(&enabled_output->mode_list,
width, height, refresh);
if (!mode)
return;
mode->flags = flags;
/* Do a mode-switch on current mode change? */
} else {
mode = find_mode(&output->mode_list, width, height, refresh);
if (!mode)
return;
mode->flags = flags;
if (flags & WL_OUTPUT_MODE_CURRENT)
output->current_mode = mode;
if (flags & WL_OUTPUT_MODE_PREFERRED)
output->preferred_mode = mode;
}
}
static const struct wl_output_listener output_listener = {
wayland_parent_output_geometry,
wayland_parent_output_mode
};
static void
output_sync_callback(void *data, struct wl_callback *callback, uint32_t unused)
{
struct wayland_parent_output *output = data;
assert(output->sync_cb == callback);
wl_callback_destroy(callback);
output->sync_cb = NULL;
assert(output->backend->sprawl_across_outputs);
wayland_head_create_for_parent_output(output->backend->compositor, output);
}
static const struct wl_callback_listener output_sync_listener = {
output_sync_callback
};
static void
wayland_backend_register_output(struct wayland_backend *b, uint32_t id)
{
struct wayland_parent_output *output;
output = zalloc(sizeof *output);
if (!output)
return;
output->backend = b;
output->id = id;
output->global = wl_registry_bind(b->parent.registry, id,
&wl_output_interface, 1);
if (!output->global) {
free(output);
return;
}
wl_output_add_listener(output->global, &output_listener, output);
output->scale = 0;
output->transform = WL_OUTPUT_TRANSFORM_NORMAL;
output->physical.subpixel = WL_OUTPUT_SUBPIXEL_UNKNOWN;
wl_list_init(&output->mode_list);
wl_list_insert(&b->parent.output_list, &output->link);
if (b->sprawl_across_outputs) {
output->sync_cb = wl_display_sync(b->parent.wl_display);
wl_callback_add_listener(output->sync_cb,
&output_sync_listener, output);
}
}
static void
wayland_parent_output_destroy(struct wayland_parent_output *output)
{
struct weston_mode *mode, *next;
if (output->sync_cb)
wl_callback_destroy(output->sync_cb);
if (output->head)
wayland_head_destroy(&output->head->base);
wl_output_destroy(output->global);
free(output->physical.make);
free(output->physical.model);
wl_list_for_each_safe(mode, next, &output->mode_list, link) {
wl_list_remove(&mode->link);
free(mode);
}
wl_list_remove(&output->link);
free(output);
}
static void
xdg_wm_base_ping(void *data, struct xdg_wm_base *shell, uint32_t serial)
{
xdg_wm_base_pong(shell, serial);
}
static const struct xdg_wm_base_listener wm_base_listener = {
xdg_wm_base_ping,
};
static void
registry_handle_global(void *data, struct wl_registry *registry, uint32_t name,
const char *interface, uint32_t version)
{
struct wayland_backend *b = data;
if (strcmp(interface, "wl_compositor") == 0) {
b->parent.compositor =
wl_registry_bind(registry, name,
&wl_compositor_interface,
MIN(version, 4));
} else if (strcmp(interface, "xdg_wm_base") == 0) {
b->parent.xdg_wm_base =
wl_registry_bind(registry, name,
&xdg_wm_base_interface, 1);
xdg_wm_base_add_listener(b->parent.xdg_wm_base,
&wm_base_listener, b);
} else if (strcmp(interface, "wl_shell") == 0) {
b->parent.shell =
wl_registry_bind(registry, name,
&wl_shell_interface, 1);
} else if (strcmp(interface, "zwp_fullscreen_shell_v1") == 0) {
b->parent.fshell =
wl_registry_bind(registry, name,
&zwp_fullscreen_shell_v1_interface, 1);
} else if (strcmp(interface, "wl_seat") == 0) {
display_start_add_seat(b, name, version);
} else if (strcmp(interface, "wl_output") == 0) {
wayland_backend_register_output(b, name);
} else if (strcmp(interface, "wl_shm") == 0) {
b->parent.shm =
wl_registry_bind(registry, name, &wl_shm_interface, 1);
}
}
static void
registry_handle_global_remove(void *data, struct wl_registry *registry,
uint32_t name)
{
struct wayland_backend *b = data;
struct wayland_parent_output *output, *next;
wl_list_for_each_safe(output, next, &b->parent.output_list, link)
if (output->id == name)
wayland_parent_output_destroy(output);
// todo: handle wl_seat removal
}
static const struct wl_registry_listener registry_listener = {
registry_handle_global,
registry_handle_global_remove
};
static int
wayland_backend_handle_event(int fd, uint32_t mask, void *data)
{
struct wayland_backend *b = data;
int count = 0;
if ((mask & WL_EVENT_HANGUP) || (mask & WL_EVENT_ERROR)) {
weston_compositor_exit(b->compositor);
return 0;
}
if (mask & WL_EVENT_READABLE)
count = wl_display_dispatch(b->parent.wl_display);
if (mask & WL_EVENT_WRITABLE)
wl_display_flush(b->parent.wl_display);
if (mask == 0) {
count = wl_display_dispatch_pending(b->parent.wl_display);
wl_display_flush(b->parent.wl_display);
}
if (count < 0) {
weston_compositor_exit(b->compositor);
return 0;
}
return count;
}
static void
wayland_destroy(struct weston_compositor *ec)
{
struct wayland_backend *b = to_wayland_backend(ec);
struct weston_head *base, *next;
struct wayland_parent_output *output, *next_output;
struct wayland_input *input, *next_input;
wl_event_source_remove(b->parent.wl_source);
weston_compositor_shutdown(ec);
wl_list_for_each_safe(base, next, &ec->head_list, compositor_link) {
if (to_wayland_head(base))
wayland_head_destroy(base);
}
wl_list_for_each_safe(output, next_output, &b->parent.output_list, link)
wayland_parent_output_destroy(output);
wl_list_for_each_safe(input, next_input, &b->input_list, link)
wayland_input_destroy(input);
wl_list_for_each_safe(input, next_input, &b->pending_input_list, link)
wayland_input_destroy(input);
if (b->parent.shm)
wl_shm_destroy(b->parent.shm);
if (b->parent.xdg_wm_base)
xdg_wm_base_destroy(b->parent.xdg_wm_base);
if (b->parent.shell)
wl_shell_destroy(b->parent.shell);
if (b->parent.fshell)
zwp_fullscreen_shell_v1_release(b->parent.fshell);
if (b->parent.compositor)
wl_compositor_destroy(b->parent.compositor);
if (b->theme)
theme_destroy(b->theme);
if (b->frame_device)
cairo_device_destroy(b->frame_device);
wl_cursor_theme_destroy(b->cursor_theme);
wl_registry_destroy(b->parent.registry);
wl_display_flush(b->parent.wl_display);
wl_display_disconnect(b->parent.wl_display);
free(b);
}
static const char *left_ptrs[] = {
"left_ptr",
"default",
"top_left_arrow",
"left-arrow"
};
static void
create_cursor(struct wayland_backend *b,
struct weston_wayland_backend_config *config)
{
unsigned int i;
b->cursor_theme = wl_cursor_theme_load(config->cursor_theme,
config->cursor_size,
b->parent.shm);
if (!b->cursor_theme) {
fprintf(stderr, "could not load cursor theme\n");
return;
}
b->cursor = NULL;
for (i = 0; !b->cursor && i < ARRAY_LENGTH(left_ptrs); ++i)
b->cursor = wl_cursor_theme_get_cursor(b->cursor_theme,
left_ptrs[i]);
if (!b->cursor) {
fprintf(stderr, "could not load left cursor\n");
return;
}
}
static void
fullscreen_binding(struct weston_keyboard *keyboard,
const struct timespec *time, uint32_t key, void *data)
{
struct wayland_backend *b = data;
struct wayland_input *input = NULL;
wl_list_for_each(input, &b->input_list, link)
if (&input->base == keyboard->seat)
break;
if (!input || !input->output)
return;
if (input->output->frame)
wayland_output_set_fullscreen(input->output, 0, 0, NULL);
else
wayland_output_set_windowed(input->output);
weston_output_schedule_repaint(&input->output->base);
}
static struct wayland_backend *
wayland_backend_create(struct weston_compositor *compositor,
struct weston_wayland_backend_config *new_config)
{
struct wayland_backend *b;
struct wl_event_loop *loop;
int fd;
b = zalloc(sizeof *b);
if (b == NULL)
return NULL;
b->compositor = compositor;
compositor->backend = &b->base;
if (weston_compositor_set_presentation_clock_software(compositor) < 0)
goto err_compositor;
b->parent.wl_display = wl_display_connect(new_config->display_name);
if (b->parent.wl_display == NULL) {
weston_log("Error: Failed to connect to parent Wayland compositor: %s\n",
strerror(errno));
weston_log_continue(STAMP_SPACE "display option: %s, WAYLAND_DISPLAY=%s\n",
new_config->display_name ?: "(none)",
getenv("WAYLAND_DISPLAY") ?: "(not set)");
goto err_compositor;
}
wl_list_init(&b->parent.output_list);
wl_list_init(&b->input_list);
wl_list_init(&b->pending_input_list);
b->parent.registry = wl_display_get_registry(b->parent.wl_display);
wl_registry_add_listener(b->parent.registry, &registry_listener, b);
wl_display_roundtrip(b->parent.wl_display);
if (b->parent.shm == NULL) {
weston_log("Error: Failed to retrieve wl_shm from parent Wayland compositor\n");
goto err_display;
}
create_cursor(b, new_config);
#ifdef ENABLE_EGL
b->use_pixman = new_config->use_pixman;
#else
b->use_pixman = true;
#endif
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
b->fullscreen = new_config->fullscreen;
if (!b->use_pixman) {
gl_renderer = weston_load_module("gl-renderer.so",
"gl_renderer_interface");
if (!gl_renderer)
b->use_pixman = true;
}
if (!b->use_pixman) {
const struct gl_renderer_display_options options = {
.egl_platform = EGL_PLATFORM_WAYLAND_KHR,
.egl_native_display = b->parent.wl_display,
.egl_surface_type = EGL_WINDOW_BIT,
.drm_formats = wayland_formats,
.drm_formats_count = ARRAY_LENGTH(wayland_formats),
};
if (gl_renderer->display_create(compositor, &options) < 0) {
weston_log("Failed to initialize the GL renderer; "
"falling back to pixman.\n");
b->use_pixman = true;
}
}
if (b->use_pixman) {
if (pixman_renderer_init(compositor) < 0) {
weston_log("Failed to initialize pixman renderer\n");
goto err_display;
}
}
b->base.destroy = wayland_destroy;
b->base.create_output = wayland_output_create;
loop = wl_display_get_event_loop(compositor->wl_display);
fd = wl_display_get_fd(b->parent.wl_display);
b->parent.wl_source =
wl_event_loop_add_fd(loop, fd, WL_EVENT_READABLE,
wayland_backend_handle_event, b);
if (b->parent.wl_source == NULL)
goto err_display;
wl_event_source_check(b->parent.wl_source);
if (compositor->renderer->import_dmabuf) {
if (linux_dmabuf_setup(compositor) < 0)
weston_log("Error: initializing dmabuf "
"support failed.\n");
}
return b;
err_display:
wl_display_disconnect(b->parent.wl_display);
err_compositor:
weston_compositor_shutdown(compositor);
free(b);
return NULL;
}
static void
wayland_backend_destroy(struct wayland_backend *b)
{
wl_display_disconnect(b->parent.wl_display);
if (b->theme)
theme_destroy(b->theme);
if (b->frame_device)
cairo_device_destroy(b->frame_device);
wl_cursor_theme_destroy(b->cursor_theme);
weston_compositor_shutdown(b->compositor);
free(b);
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
static const struct weston_windowed_output_api windowed_api = {
wayland_output_set_size,
wayland_head_create_windowed,
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
};
static void
config_init_to_defaults(struct weston_wayland_backend_config *config)
{
}
WL_EXPORT int
weston_backend_init(struct weston_compositor *compositor,
struct weston_backend_config *config_base)
{
struct wayland_backend *b;
struct wayland_parent_output *poutput;
struct weston_wayland_backend_config new_config;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
int ret;
if (config_base == NULL ||
config_base->struct_version != WESTON_WAYLAND_BACKEND_CONFIG_VERSION ||
config_base->struct_size > sizeof(struct weston_wayland_backend_config)) {
weston_log("wayland backend config structure is invalid\n");
return -1;
}
config_init_to_defaults(&new_config);
memcpy(&new_config, config_base, config_base->struct_size);
b = wayland_backend_create(compositor, &new_config);
if (!b)
return -1;
if (new_config.sprawl || b->parent.fshell) {
b->sprawl_across_outputs = true;
wl_display_roundtrip(b->parent.wl_display);
wl_list_for_each(poutput, &b->parent.output_list, link)
wayland_head_create_for_parent_output(compositor, poutput);
return 0;
}
if (new_config.fullscreen) {
if (!wayland_head_create(compositor, "wayland-fullscreen")) {
weston_log("Unable to create a fullscreen head.\n");
goto err_outputs;
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
}
return 0;
}
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
ret = weston_plugin_api_register(compositor, WESTON_WINDOWED_OUTPUT_API_NAME,
&windowed_api, sizeof(windowed_api));
weston: Port Wayland backend to new output handling API This is a complete port of the Wayland backend that uses the recently added output handling API for output configuration. - Output can be configured at runtime by passing the necessary configuration parameters, which can be filled in manually, obtained from the configuration file or obtained from the command line using previously added functionality. It is required that the scale and transform values are set using the previously added functionality. - Output can be created at runtime using the output API. The output creation only creates a pending output, which needs to be configured the same way as mentioned above. However, the backend can behave both as windowed backend and as a backend that issues "hotplug" events, when running under fullscreen shell or with --sprawl command line option. The first case was covered by reusing previously added functionality. The second case required another API to be introduced and implemented into both the backend and compositor for handling output setup. After everything has been set, output needs to be enabled manually using weston_output_enable(). v2: - Fix wet_configure_windowed_output_from_config() usage. - Call wayland_output_disable() explicitly from wayland_output_destroy(). v3: - Get rid of weston_wayland_output_api and rework output creation and configuration in case wayland backend is started with --sprawl or on fullscreen-shell. - Remove unneeded free(). - Disallow calling wayland_output_configure more than once. - Remove unneeded checks for output->name == NULL as that has been disallowed. - Use weston_compositor_add_pending_output(). v4: - Drop unused fields from weston_wayland_backend_config and bump WESTON_WAYLAND_BACKEND_CONFIG_VERSION to 2. - Move output creation to backend itself when --fullscreen is used. - Prevent possible duplicated output names by assigning a different name to outputs created without any configuration specified. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
8 years ago
if (ret < 0) {
weston_log("Failed to register output API.\n");
wayland_backend_destroy(b);
return -1;
}
weston_compositor_add_key_binding(compositor, KEY_F,
MODIFIER_CTRL | MODIFIER_ALT,
fullscreen_binding, b);
return 0;
err_outputs:
wayland_backend_destroy(b);
return -1;
}