This creates the FP16 shadow framebuffer automatically if the color
transformation from blending space to output space is not identity and
the backend does not claim to implement it on the renderer's behalf.
That makes the weston_output_set_renderer_shadow_buffer() API and
use-renderer-shadow weston.ini option obsolete.
To still cater for the one test that needs to enable the shadow
framebuffer in spite of not needing it for color correct blending, the
quirk it uses now also forces the shadow.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add a regression test to verify that the cursor image is correctly
updated when setting a cursor surface with an already committed buffer
from a previous pointer entry, without recommitting a cursor buffer for
the current entry.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Store the pointer serial for events that provide one, so that it can be
used by tests to send requests that require it (e.g., setting the cursor
surface).
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Clean up after each test to avoid ASan reporting leaks.
At few points client_roundtrip() is replaced with client_destroy()
because the latter does a final roundtrip anyway.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
expect_protocol_error() ensures that the connection has failed in the
expected way. To satisfy ASan leak detection, we still need to tear down
everything, including call client_destroy().
client_destroy() needs to check that tear-down does not cause protocol
errors, so it does one last roundtrip that checks that is succeeds. But
if the connection is already down in an expected way, this roundtrip
cannot succeed and must be skipped.
Also moves the roundtrip under 'if (wl_display)', assuming the 'if' is
there for a reason - but obviously that reason was never used as it
would have crashed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
struct weston_test_surface in the test harness' compositor plugin had no
tear down code, which lead to ASan report on alpha-blending test:
Direct leak of 64 byte(s) in 2 object(s) allocated from:
#0 0x7f8931f10330 in __interceptor_malloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9330)
#1 0x7f892d934425 in move_surface ../../git/weston/tests/weston-test.c:181
#2 0x7f893159d8ed in ffi_call_unix64 (/lib/x86_64-linux-gnu/libffi.so.6+0x68ed)
While at it, let's do this properly for once:
- put the creation in a new function
- hook up to the weston_surface destroy signal so this actually gets
freed (fixes the leak)
- check that we don't overwrite another surface role
- check that committed_private actually is ours
- set the surface label func so it gets properly listed in debugs and
traces
- use the proper surface role setup call, so no-one stomps on anyones
toes if a test makes a mistake by using a wrong wl_surface
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Fixes a leak found by ASan in alpha-blending-test.
Direct leak of 160 byte(s) in 2 object(s) allocated from:
#0 0x7f511fe11518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7f511fc76373 in zalloc ../../git/wayland/src/wayland-private.h:232
#2 0x7f511fc76373 in proxy_create ../../git/wayland/src/wayland-client.c:422
#3 0x7f511fc79dcc in create_outgoing_proxy ../../git/wayland/src/wayland-client.c:651
#4 0x7f511fc79dcc in wl_proxy_marshal_array_constructor_versioned ../../git/wayland/src/wayland-client.c:736
#5 0x7f511fc7b17b in wl_proxy_marshal_constructor_versioned ../../git/wayland/src/wayland-client.c:873
#6 0x5583e5348f43 in wl_registry_bind /home/pq/local/include/wayland-client-protocol.h:1165
#7 0x5583e534cfbe in handle_global ../../git/weston/tests/weston-test-client-helper.c:800
#8 0x7f511f34b8ed in ffi_call_unix64 (/lib/x86_64-linux-gnu/libffi.so.6+0x68ed)
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Fixed a leak found by ASan:
Direct leak of 160 byte(s) in 2 object(s) allocated from:
#0 0x7f511fe11518 in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0xe9518)
#1 0x7f511fc76373 in zalloc ../../git/wayland/src/wayland-private.h:232
#2 0x7f511fc76373 in proxy_create ../../git/wayland/src/wayland-client.c:422
#3 0x7f511fc79dcc in create_outgoing_proxy ../../git/wayland/src/wayland-client.c:651
#4 0x7f511fc79dcc in wl_proxy_marshal_array_constructor_versioned ../../git/wayland/src/wayland-client.c:736
#5 0x7f511fc7b17b in wl_proxy_marshal_constructor_versioned ../../git/wayland/src/wayland-client.c:873
#6 0x5583e5348f43 in wl_registry_bind /home/pq/local/include/wayland-client-protocol.h:1165
#7 0x5583e535140b in bind_to_singleton_global ../../git/weston/tests/weston-test-client-helper.c:1863
#8 0x5583e5348752 in alpha_blend_monotonic ../../git/weston/tests/alpha-blending-test.c:219
#9 0x5583e5348571 in wrapalpha_blend_monotonic ../../git/weston/tests/alpha-blending-test.c:200
#10 0x5583e53554cc in run_test ../../git/weston/tests/weston-test-runner.c:162
#11 0x5583e5355b6d in run_case ../../git/weston/tests/weston-test-runner.c:277
#12 0x5583e5355913 in for_each_test_case ../../git/weston/tests/weston-test-runner.c:235
#13 0x5583e5355df5 in testsuite_run ../../git/weston/tests/weston-test-runner.c:311
#14 0x7f511aaaf752 in client_thread_routine ../../git/weston/tests/weston-test.c:404
#15 0x7f511f88cfa2 in start_thread /build/glibc-vjB4T1/glibc-2.28/nptl/pthread_create.c:486
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This ensures the layers are torn down properly.
See commit: libweston: add weston_layer_fini()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In "backend-drm: simplify compile time array copy", ARRAY_COPY was
introduced to be used by the DRM-backend.
In this patch we expand its usage to other code where hardcoded arrays
are being copied.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In commit "libweston: add struct weston_drm_format" we've added an API
to store and manage DRM formats and modifiers. As it has a couple of set
operations that are not so obvious, this adds unit tests to ensure
correctness. In the future we may expand this API and also improve
performance, so it is important to have this.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This will be useful in CI, where we do not want to see any skips. If
something starts to skip, that's a mistake somewhere, and want to catch
it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Code is using the form
#if ENABLE_JUNIT_XML
which is fine until we start using -Wundef. I think the existing code
would fail or at least warn if you disabled test-junit-xml with -Wundef.
Make sure ENABLE_JUNIT_XML is always defined so that -Wundef can be
added to build flags.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If the compositor does not have the shadow buffer capability (implied by
the color ops capability bit), then trying to run the shadow buffer test
is useless, it would just fail. Let it skip instead.
Fixes: b1e56143c5
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This allows tests to skip when required capabilities are not present.
The output damage test for the shadow buffer case needs this.
required_capabilities is added to struct weston_testsuite_quirks which
is libweston public API just because there is no better place currently.
This is a little weird because the code to check it is in compositor,
not libweston.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This will hit the XYUV shader variant in GL-renderer that was not
covered in the test suite before.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This header is for sharing fallback definitions for drm_fourcc.h. A new
test in tests/yuv-buffer-test.c is going to be needing XYUV8888 format,
and more new formats will be expected with HDR supports.
Share these fallback definitions in one place instead of copying them
all over.
All users of drm_fourcc.h are converted to include weston-drm-fourcc.h
instead for consistency: have the same definitions available everywhere.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Extend the existing output-damage test to test
blit_shadow_to_output() specifically. This function had problems
originally, so make sure they can't reappear.
The added quirk is explained in the test.
An additional check of the quirk in gl_renderer_output_create() ensures
that the shadow framebuffer is really used. The test could false-pass if
the shadow is not used.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Proper color management will need blending done with linear light pixel
values, that is, EOTF applied before blending, and then inverse-EOTF
applied for scanout after blending. The simplest way to set that up is
to use an intemediate framebuffer a.k.a shadow buffer containing the
composited image in linear light values, then blit from that to the
actual framebuffer.
This patch implements the shadow buffer, but the linear light
blending is left for another patch. This allows GL-renderer to turn
WESTON_CAP_COLOR_OPS on.
Half-float is chosen as the buffer format because linear light values
require more bits to encode with sufficient precision than the usual
non-linear pixel values.
v2: Use /* */ instead of // (Pekka)
Rename fbo and tex to shadow_{fbo,tex} (Pekka)
Check for OpenGLES capabilities before creating
shadow_{tex,fbo} (Pekka)
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
v3: Rebased.
Simplified GL version checks (Sebastian)
Apply changes from "libweston: add color ops cap and bool renderer
shadow buffer"
Renamed supports_half_float_texture to has_gl_half_float to
follow the existing naming pattern.
Introduce gl_renderer_create_shadow_16f().
Undo moving of glViewport() call.
Replace half_float_texture_enabled with shadow_exists().
Introduce struct gl_output_state_shadow.
Assert no resizing with shadow.
Fix triangle fan debug.
Rename repaint_from_texture() to blit_shadow_to_output().
Rewrite commit message because linear light blending is not
implemented in this patch.
Fix blit_shadow_to_output() for scaled/transformed outputs and
remove redundant code.
Fix has_gl_half_float determination.
v4: Disable blending in blit_shadow. (Daniel)
Port to gl_renderer_get_program().
Make a generic fbo-texture struct with parameterized format. (Daniel)
Change has_gl_half_float into gl_half_float_type.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This test ensures that client submitted damage goes to the screen
correctly, regardless of output scale or transform.
The added quirk is explained in the test that uses it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
I am working on adding a test to ensure Weston repaints damage
correctly, where I rely on Weston repainting exactly and only the damage
submitted by a client. That means I have to stop screenshooting from
damaging everything automatically. Doing that, I noticed that
screenshots on DRM-backend could theoretically get stuck if I do that.
So test for it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Use consistent terminology with the code: index starts from zero,
numbering starts from one. Fixture 0 runs all fixtures.
Suggested-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When there is a fixture setup array, list all fixture setups with their
numbers and names. This should help people picking a single fixture to
run and makes the --list output more interesting.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Instead of "fixture %d", use the proper fixture name if it exists or
nothing. Some places still show the fixture index because it is used on
the command line.
This makes the reports more readable.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Make it more explicit that the return value is NULL when there is no
arrray.
This patch makes the following patch smaller.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This allows tests to give a meaningful name for their fixture setups
when they use more than one of them.
If a test uses DECLARE_FIXTURE_SETUP_WITH_ARG(), it must now pass a
third argument naming the field which is struct fixture_metadata. This
also means that the fixture setup data must now be a struct, it cannot
be a plain type anymore. A compiler error is generated if the field type
is not the expected one.
All tests using DECLARE_FIXTURE_SETUP_WITH_ARG() and converted to the
new form and given names for their fixture setups.
The fixture setup names not actually used yet, that will be another
patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This makes sub-tests visible in the junit output, making Gitlab test
reports more detailed.
This does not apply to zuc tests, which look like they could produce
junit XML directly. And maybe TAP? Left for another time.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds a test to ensure that the wl_shm formats YUV420, NV12 and YUYV
are decoded and converted to RGB correctly in GL-renderer.
The test deliberately uses a 256 x 256 test image so that effects from
width vs. pitch vs. stride cannot be observed, and row padding is zero.
Also padding between planes is zero. Attempting to use a test image with
less "round" dimensions lead to stride mismatch in GL-renderer, likely
due to GL_UNPACK_ALIGNMENT being left at value 4. It is unclear if YUV
wl_shm buffers' row stride needs to be aligned to 4 bytes or not, so I
did not pursue fixing it. GL-renderer seems to be confusing width, pitch
and stride even further, and not e.g. allow padding with ARGB buffers.
See also: https://gitlab.freedesktop.org/wayland/weston/-/issues/354
Furthermore, the test arranges so that each 2x2 pixel block has the same
color. This avoids having to consider chroma siting when sub-sampling.
This way all the test cases can use the same reference image.
The source image chocolate-cake.png is taken and copyright by Pekka
Paalanen, hereby licensed as
http://creativecommons.org/licenses/by-sa/4.0/ .
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In anticipation of invasive future work on color management, add an
alpha blending test to make sure we don't break alpha blending.
The idea for doing a monotonicity test came from glennk on #dri-devel in
Freenode IRC.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This refactors a new function verify_image() out of
verify_screen_content().
verify_image() will be useful with a test that verifies a screenshot
against a reference image but also wants to do additional testing on the
screenshot.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Const has documentary value saying the code will not modify the
parameter contents. Everything that can be const, should be const.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Do not write out PNG files for successful screenshot tests. It clutters
the build directory, but the biggest reason is to keep the CI artifacts
smaller.
internal-screenshot test still writes a PNG, it's good to keep one PNG
written so that we exercise the PNG writing code always.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is a follow-up of commit "tests: start to use Weston's
default screenshooter in the test suite".
As we've started to use Weston's default screenshooter
implementation and protocol extension in the test suite,
we don't need what we've created specifically for the test
suite anymore.
Drop test suite screenshooter implementation and protocol
extension.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Until now we had two different protocol extensions: one for the
test suite screenshooter and other for the screenshooter client.
As they are identical and this won't change, make the test suite
use the same protocol that the screenshooter client uses.
Besides the cleanup, this change will also allow us to use the
DRM writeback screenshooter in the test suite, as the test suite
implementation is hardcoded to use a renderer based screenshooter.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The 'struct test' has a field 'int buffer_copy_done', but it
is in a fact a boolean. Change it to 'bool buffer_copy_done'.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The wl_drm protocol is not being used by the test client. So
remove 'bool has_wl_drm' from 'struct client' and also the
branch that initializes this variable in handle_global().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
When destroying the shell we need to remove the listeners
as well. The test-desktop-shell was forgetting to do this.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
There are some specific cases in which we need Weston to
behave differently when running in the test suite. This
adds a new API to allow the tests to select these behaviors.
For instance, in the DRM backend we plan to add a writeback
connector screenshooter. In case it fails for some
reason, it should fallback to the renderer screenshooter
that all other backends use. But if we add a test to
ensure the correctness of the writeback screenshooter,
we don't want it to fallback to the renderer one, we
want it to fail. With this new API we can choose to
disable the fallback behavior specifically for this test.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Convert ivi-shell-app-test.c to use `weston_ini_setup`. It also removes
the pre-made weston.ini and all the related code in the meson files.
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Currently doesn't exist a standard way to write a weston.ini inside a test.
Here, two new functions `weston_ini_setup` and `cfgln` are introduced to
help the test writer to write a weston.ini file and load it to the test.
And `internal-screenshot-test` is converted to use the new method of write
a weston.ini. This conversion serves as example and initial API test.
The tester needs to call `weston_test_harness_execute_as_client` or
`weston_test_harness_execute_as_plugin` in the same way as before.
The `weston_ini_setup` will fill the setup->config_file with the
correct path to the weston.ini file.
The main design goal is to avoid pre-made or build-made weston.ini(s)
and keep the test as self-contained as possible.
Closes:#410
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
This adds the first DRM-backend test. It is very simple
and was made in order to make easier to add more complex
DRM-backend tests in the future.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
With this patch we add support to run DRM-backend tests locally
in the test suite. For now this won't work in the CI, as there
are no cards available. But the plan is to achieve this by using
VKMS (virtual KMS) in the future.
To run DRM-backend tests locally, first of all the user has to
set the environment variable WESTON_TEST_SUITE_DRM_DEVICE to
'card0', 'card1' or any other device where he wants to run
the tests. Also, for now it only works if it is run as root,
but in the future this problem will be solved.
The tests will run on a non-default seat. The reason for that
is that we want to avoid opening input devices unnecessarily.
Also, since DRM-backend usage requires gaining DRM master status
on a DRM KMS device, nothing else must be using the device at
the same time. To achieve this we use a lock to run the
DRM-backend tests sequentially.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The test suite is dealing only with headless-backend tests.
In order to make it able to run DRM-backend tests, we have
to properly select the renderer that it will use.
This patch add the command line option --use-pixman if the test
defines the DRM-backend renderer as RENDERER_PIXMAN, and it will
add nothing to the command line if it defines RENDERER_GL (the
DRM-backend default renderer is already GL). Also, if the user
defines the DRM-backend renderer as RENDERER_NOOP, the test will
fail (as it should, since DRM-backend does not implement it).
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In the test suite we have some default options which
are command line arguments used by most of the tests.
Two of these are width==320 and height==240. But
when we have DRM or fbdev backends, width and height
are not possible command line arguments. This makes
impossible to run tests that uses one of these types
of backends, as the compositor won't open if the
command line string is wrong.
Fix this by not passing command line arguments width
and height if the backend is DRM or fbdev.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This test ensures that
"pixman-renderer: half-fix bilinear sampling on edges"
keeps on working.
Unlike in the original report
https://gitlab.freedesktop.org/wayland/weston/issues/373, here we use buffer
scale 2 instead of output scale 2 to trigger bilinear filter. The effect is the
same, the actual resulting image in the failing case is just a little
different. This is so that it will be easy to add more viewport screenshooting
tests in this program in the future.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Pekka Paalanen
Alexandros Frantzis
Leandro Ribeiro
Harish Krupo
Maxime Roussin-Bélanger
Igor Matheus Andrade Torrente
Denys Dmytriyenko