Apparently some compilers complain about set but not used variables
'available' and 'bufs', but I don't get the warning. Still, separate the
debugging code from shm_surface_buffer_release(), so that we only
compute 'bufs' when it is printed. This should fix the warnings.
The debugging code now prints the shm_surface buffer state before and
after, instead of just after.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This set of changes adds support for searching for a given config file
in the directories listed in $XDG_CONFIG_DIRS if it wasn't found in
$XDG_CONFIG_HOME or ~/.config. This allows packages to install custom
config files in /etc/xdg/weston, for example, thus allowing them to
avoid dealing with home directories.
To avoid a TOCTOU race the config file is actually open()ed during the
search. Its file descriptor is returned and stored in the compositor
for later use when performing subsequent config file parses.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
In case a toytoolkit application manages to schedule resizes constantly,
throttle them to the main surface display.
When resizing, all surfaces are updated synchronously, so it also makes
sense to synchronize on the main surface's frame callback particularly.
Rendering any faster will not make sense.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Mesa's eglSwapBuffers() waits for the frame event from the previous
swapBuffers, before it returns. Apparently eglSwapInterval(), which
should be able to disable the wait, is unimplemented for now.
When a sub-surface contains an EGL widget, and the commit mode is
synchronized, the frame events will not be delivered to EGL until the
parent surface gets committed. Therefore rendering the EGL widget twice
would lead to a deadlock.
When the window is being resized, we need to force a repaint of the EGL
widget, too, to make the whole window consistent. For that, we need to
make sure the frame event from the previous eglSwapBuffers() actually
arrives.
This patch adds an extra wl_surface.commit(parent), when the window is
being resized, which should guarantee, that the previous eglSwapBuffers
gets its event.
To properly handle an EGL widget in a sub-surface, running in its own
thread, the EGL widget's automatic updates should be paused before
sending the extra wl_surface.commit(parent). A natural place for the
pause would be in the widget's resize hook. However, wl_surface.commit
cannot be called right after resize hooks, because it would commit new,
incomplete surface state. Therefore this patch is not enough for
threaded toytoolkit applications. Luckily those do not exist yet.
When eglSwapInterval() gets implemented, this patch should be reverted.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add a demo program with:
- a main surface (green)
- a Cairo-image sub-surface (red)
- a raw GLESv2 widget (triangle)
Sub-surface input region is set empty to avoid problems in toytoolkit.
If Cairo links to libGL, then we will end up with also libGLESv2 linked
to subsurfaces program, and both libs getting really used, which leads
to disaster.
Do not build subsurfaces demo, if Cairo links to libGL and cairo-egl is
usable.
The GL rendering loop is not tied to the toytoolkit or the widget, but
runs directly from its own frame callback. Therefore it runs
independent of the rest of the application. This also relies on one of
two things:
- eglSwapInterval(0) is implemented, and therefore eglSwapBuffers never
blocks indefinitely, or
- toytoolkit has a workaround, that guarantees that eglSwapBuffers will
return soon, when we force a repaint on resize.
Otherwise the demo will deadlock.
The code is separated into three sections:
1. The library component, using only EGL, GLESv2, and libwayland-client
APIs, and not aware of any toolkit details of the parent application.
This runs independently until the parent application tells otherwise.
2. The glue code: a toytoolkit application widget, who has its own
rendering machinery.
3. The application written in toytoolkit.
This patch also adds new toytoolkit interfaces:
- widget_get_wl_surface()
- widget_get_last_time()
- widget_input_region_add()
Toytoolkit applications have not had a possibility to change the input
region. The frame widget (decorations) set the input region on its own
when used, otherwise the default input region of everything has been
used. If a window does not have a frame widget, it can now use
widget_input_region_add() to set a custom input region.
These are not window methods, because a widget may lie on a different
wl_surface (sub-surface) than the window.
Changes in v3:
- replace set_commit_mode with set_sync and set_desync
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add redraw_needed flag to all surfaces, in addition to having one in
window. The window redraw_needed flag is changed to force a redraw of
the whole window, regardless of frame events.
widget_schedule_redraw() now schedules the redraw only for the surface,
where the widget is on. window_schedule_redraw() is equivalent to
scheduling a redraw for all (sub-)surfaces of the window.
We still use only one deferred task for all redraws.
surface_redraw() will skip the redraw, if the window does not force a
redraw and the surface does not need a redraw. It will also skip the
redraw, if the frame callback from the previous redraw has not triggered
yet. When the frame callback later arrives, the redraw task will be
scheduled, if the surface still needs a redraw.
If the window forces a redraw, the redraw is executed even if there is a
pending frame callback. This is for resizing: resizing should trigger a
window repaint, as it really wants to update all surfaces in one go, to
apply possible sub-surface size and position changes. Resizing is the
only thing that makes a window force a redraw.
With this change, subsurfaces demo can avoid repainting the cairo
sub-surface while still animating the GL sub-surface.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The new application API window_add_subsurface() will create a plain
widget that is on a new sub-surface.
The sub-surface position is taken from the surface's root widget
allocation. This way widget allocations are always in the main surface
(i.e. window) coordinates. However, Cairo drawing coordinates will now
be different to widget coordinates for sub-surfaces. Cairo coordinates
are fixed by applying a translation in widget_cairo_create(), so that
widget drawing code can simply use the widget allocation as before.
Sub-surfaces are hooked up into resize, window flush, redraw, and
find_widget. Window maintains a list of sub-surfaces in top-first order.
Add a client settable default commit mode, and toggle the mode when
resizing to guarantee in-sync updates of a window and its sub-surfaces.
Changes in v3:
- replaced set_commit_mode with set_sync and set_desync
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Increase the maximum number of shm "leaves" to three, and rewrite the
leaf release and pick algorithms. The new algorithms hopefully improve
on buffer re-use while freeing unused buffers.
The goal of the new release algorithm is to always leave one free leaf
with storage allocated, so that the next redraw could start straight on
it.
The new leaf picking algorithm will prefer a free leaf that already has
some storage allocated, instead of just picking the first free leaf that
may need to allocate a new buffer.
Triple-buffering is especially for sub-surfaces, where the compositor
may have one wl_buffer busy on screen, and another wl_buffer busy in the
sub-surface cached state due to the synchronized commit mode. To be
able to forcibly repaint at that situation for e.g. resize, we need a
third buffer.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add protocol for sub-surfaces, wl_subcompositor as the global interface,
and wl_subsurface as the per-surface interface extension.
This patch is meant to be reverted, once sub-surfaces are moved into
Wayland core.
Changes in v2:
- Rewrite wl_subcompositor.get_subsurface description, and move mapping
and commit details into wl_subsurface description. Check the wording
in wl_subsurface.set_position description.
- Add wl_subsurface.set_commit_mode request, and document it, with the
commit_mode enum. Add bad_value error code for wl_subsurface.
- Moved the protocol into Weston repository so we can land it upstream
sooner for public exposure. It is to be moved into Wayland core later.
- Add destroy requests to both wl_subcompositor and wl_subsurface, and
document them. Experience has showed, that interfaces should always
have a destructor unless there is a good and future-proof reason to not
have it.
Changes in v3:
- Specify, that wl_subsurface will become inert, if the corresponding
wl_surface is destroyed, instead of requiring a certain destruction
order.
- Replaced wl_subsurface.set_commit_mode with wl_subsurface.set_sync and
wl_subsurface.set_desync. Parent-cached commit mode is now called
synchronized, and independent mode is desynchronized. Removed
commit_mode enum, and bad_value error.
- Added support for nested sub-surfaces.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Also rename input_method_context to wl_input_method_context,
input_panel to wl_input_panel and input_panel_surface to
wl_input_panel_surface.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Use "default" preedit style as default. "None" is used when the
composing text should look like non-composing text.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
There were some reset calls missing, which resulted in wrong preedit
state on input method side.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
wl_egl_window_destory() destroys the window handle that
dri2_destroy_surface() later uses when eglTerminate() is called.
Reordering the tear down order prevents such case from occuring.
Resolve a bad frame visible when maximizing toytoolkit programs with the the
maximize button in decorations. Windows now use wl_display.sync requests to
wait for a maximize to finish before drawing again, following suggestions from
http://lists.freedesktop.org/archives/wayland-devel/2013-February/007650.html
The current semantics would implicitly attach the most recently attached
buffer at commit time and send a release event when the buffer enventually
was released. The implicit attach is a little too subtle though and this
patch changes the semantics to always only send release events in response
to an attach event. As a consequence, once a compositor releases a buffer,
it no longer has a reference to it and wl_surfcea.damage is undefined.
Thus, the client side visible change is that damage request must always
be preceeded by a wl_surface.attach request, to ensure there's a valid buffer,
even if that means attaching the same buffer again.
Make sure that display_acquire_window_surface() creates the Cairo
surface as necessary. Otherwise surface->toysurface can be NULL.
This fixes weston-screensaver fullscreen mode. Demo mode was not
affected as it uses window decorations, and so the Cairo surface is
created. This regression was introduced by:
commit 0c4445ba57
Author: Pekka Paalanen <ppaalanen@gmail.com>
Date: Wed Feb 13 16:17:23 2013 +0200
window: create Cairo surfaces on demand for redraw
Reported-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add an extra cursor_position, which also allows to change the anchor
(for slections). Change the index type to int to allow setting it before
the beginning of a commited string.
The cursor should not be moved as a direct repsonse to this event but
atomically on the next commit_string event.
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Allows to show/hide the input panel (virtual keyboard) more independent
of focus (some applications might to require additionaly click on a
focused entry to show the input panel).
Signed-off-by: Jan Arne Petersen <jpetersen@openismus.com>
Alexander Larsson
Pekka Paalanen
Dima Ryazanov
Ossama Othman
Pekka Paalanen
Kristian Høgsberg
Jan Arne Petersen
Yeh, Sinclair
Philipp Brüschweiler
Tiago Vignatti
Giulio Camuffo
Emilio Pozuelo Monfort
MoD
Rafal Mielniczuk