The aspect ratio definitions for 64:27 and 256:135 have been added with
libdrm 2.4.95. However, Weston currently depends on libdrm 2.4.89 or
higher. Define the definitions in Weston to support libdrm older than
2.4.95.
Fixes: #332
Fixes: 6093772f45 ("backend-drm: Use aspect-ratio bit definitions from libdrm")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Commit adaf8c7410 ("renderer: change frame_signal emission to pass
previous_damage as data argument") missed updating all frame_signal
emissions. Later commit 2619bfe420 ("move frame_signal emission to
weston_output_repaint()") fixed this deficency along with moving the
location of the emission. Due to an issue of the location change, this
commit had to be reverted again.
This makes sure that the pixman as well as the GL renderer now also
emits the damage region instead of the Weston output.
Fixes: adaf8c7410 ("renderer: change frame_signal emission to pass previous_damage as data argument")
Signed-off-by: Stefan Agner <stefan@agner.ch>
The member previous_damage from struct weston_output is no longer necessary.
First, stop calling init, fini and copying output_damage to it. Then remove
it from struct weston_output.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
The emission of frame_signal has to happen before a flip, otherwise
glReadPixels() could read an old frame or even worse an uninitialized buffer.
So move frame_signal emission back to renderers.
This reverts commit 2619bfe420.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
When the aspect-ratio-aware mode support was added to Weston, it was
done before the libdrm support was finalised and merged. Between it
being added to Weston and being merged, it changed to no longer provide
the offset for the bitmask.
Instead of using the mask and a compatible enum, if we update our
libdrm dependency, we can use the flag definitions directly from libdrm.
In 94e4068ba1, the libdrm dependency was bumped to 2.4.83, which
enabled us to remove a bunch of error-prone ifdefs by making atomic and
modifier support mandatory.
We determined in the discussion of !311 that it was safe to push the
dependency as high as 2.4.91, as that was what was available in major
distributions.
Bumping to 2.4.86 allows us to safely remove the ifdef and go with
upstream flags, as that was added in mesa/drm@0d889201d106.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of getting previous_damage from the weston_output struct, get it from
the frame_signal data argument. This will make possible to remove
previous_damage from weston_output after we decide what to do with
output->previous_damage usage in DRM backend.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
This will make possible to users that are listening to frame_signal to get
previous_damage from the data parameter instead of using
output->previous_damage.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Instead of getting weston_output from the frame_signal argument 'void *data',
add weston_output in the private data struct of the users that are listening
to frame_signal. With this change we are able to pass previous_damage as the
data argument.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
In order to remove duplication and make the code easier to follow, move
frame_signal emission from renderers to weston_output_repaint(). This should
have no observable effect.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Accept XYUV dmabuf buffers that a client application such as
weston-simple-dmabuf-v4l might submit.
v2 (Daniel):
Add XYUV to yuv_formats array to have the compositor color convert
with a shader if GL_TEXTURE_EXTERNAL_OES does not work.
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Instead of using the EGL_*_WL macros imported from EGL headers,
start using enums that would be defined locally. This is needed as
there are limited number of macros defined in EGL headers and
adding new ones is not practically feasible when adding a new
texture type. (suggested by Daniel Stone)
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
contents of the flight recorder
The overlap variable is sufficient to determine from where to start
displaying the contents of the ring buffer. Also redundant to verify
if the position in the buffer went over the maximum size.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
created
Having a (single) global variable which others depend on it implies
having a single flight recorder present. Until we have a reason to
support multiple flight recorders limit the amount to a maximum of one.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
With it add also a function which can be used in an assert()-like
situation to display the contents of the ring buffer. Within gdb
this call also be called if the program is loaded/still loaded into
memory.
The global variable will be used in a later patch to be accessed from a
python gdb script.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Libweston is not allowed to depend on Weston. Fortunately this include is
unnecessary and can be simply removed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Remove unnecessary ifdefs for DRM_MODE_CONNECTOR_DSI, DRM_MODE_CONNECTOR_DPI.
They are both provided by libdrm and were introduced long before 2.4.83 (the
lowest version we currently support).
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Since commit 28d26483 ("build: bump libdrm requirement to newer version
(2.4.83)"), all supported libdrm versions provide modifier formats,
atomic API and blob formats. Remove ifdef checks (HAVE_DRM_ADDFB2_MODIFIERS,
HAVE_DRM_ATOMIC, HAVE_DRM_FORMATS_BLOB) to improve the code and make it
simpler.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Mode change from mixed-mode to renderer-only means we should no longer
try to place views in HW planes (as we composite everything into the
primary plane) thus we should avoid that whenever that happens.
In the same time we need to be able to place in mixed-mode/renderer-only
mode the cursor view into the cursor plane (if one is available).
This patch adds a further check to skip plane assignment when disabling
overlay support (when we switch to renderer-only mode), when drivers do
not have atomic-modeset or it has been disabled intentionally.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Adds a further assert() to make sure we're not checking against invalid
values. This was seen in the wild when the kernel rejects the commit for
overlay resulting in a check for invalid zpos values.
Fixes: #304
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
when switching to mixed-mode of compositing
This way we avoid an (incorrect) duplicate check of zpos values. Also,
this would be needed because the renderer needs have the lowest zpos value
available as we don't (yet) properly support underlays, the primary
plane serves as our renderer.
Adds also a check to see if we try to assign a view to a plane with
a lower zpos value than the one assigned to the primary when switching
to mixed-mode of compositing.
Fixes: #304
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This is necessary for the test harness to be able to execute the compositor
multiple times in the same process. As we never unload opened modules, the
first compositor iteration will leave them all loaded and following compositor
iterations will then have them already loaded.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This introduces a new convention of checking through the compositor destroy
listener if the plugin is already initialized. If the plugin is already
initialized, then the plugin entry function succeeds as a no-op. This makes it
safe to load the same plugin multiple times in a running compositor.
Currently module loading functions return failure if a plugin is already
loaded, but that will change in the future. Therefore we need this other method
of ensuring we do not double-initialize a plugin which would lead to list
corruptions the very least.
All plugins are converted to use the new helper, except:
- those that do not have a destroy listener already, and
- hmi-controller which does the same open-coded as the common code pattern
did not fit there.
Plugins should always have a compositor destroy listener registered since they
very least allocate a struct to hold their data. Hence omissions are
highlighted in code.
Backends do not need this because weston_compositor_load_backend() already
protects against double-init. GL-renderer does not export a standard module
init function so cannot be initialized the usual way and therefore is not
vulnerable to double-init.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
As we avoid importing the buffer in the GPU, when attaching the buffer
we'll not have a valid image to retrieve it from, and as such we'll
avoid touching and setting the surface state shader.
This adds also 'direct_display' to the surface state and with it, sets the
surface state 'direct_display' member whenever the imported buffer will
have the direct-display member set.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Adds a new callback 'can_scanout_dmabuf' in weston_backend, which
can be set by the back-end do determine if the buffer supplied can be
imported directly by KMS.
This patch adds a wrapper over it, 'weston_compositor_dmabuf_can_scanout'
which is called before importing the dmabuf in the GPU if the
direct_display dmabuf is being set. If that's true and the check
failed, we refuse to create a wl_buffer.
This patch avoids importing in the GPU.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This comment was added in 230f3b1bf8 with the
intent that if we had an information table about pixel formats (which we do
have today), we could implement more sanity checks like ensuring that width
pixels fit into stride.
Daniel Vetter said on #dri-devel IRC recently:
< danvet> since userspace shouldn't look at stride for buffers with
modifiers, only pass it around unchanged
I asked for clarification. It was expected that userspace would not do any kind
of sanity checks as modifiers could change everything.
Let's remove the misleading code comment so that people don't get the idea of
adding more well-intended but ill-advised sanity checks. If more checks are
added, they must take the modifier into account, which the existing checks do
not do.
After 5 years, it is far too late to remove our existing sanity checks, but we
can attempt to not cause any more damage that would restrict what people can do
in the kernel.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
It makes much more sense to be there. It adds some additional drm_debug()
statements to provide reason for failing to place the view in the HW
plane. Makes the reason for failing more accurate.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Avoids the need to retrieve the DRM framebuffer in each function and
re-uses the one got before constructing the zpos candidate list.
Takes another reference for the scanout as to live the state, like
there's one for the overlay bit.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As we already have a potential plane available to use, pass it
over the _prepare_overlay_view instead of trying to find one
from the backend plane list.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
In this manner we will allow views to reach the overlay (or underlays)
even if the damage tracking will detect that the new view will
occlude the view underneath it.
Renames occluded_region to planes_region, and uses occluded_region
to represent the region where we add each view's visible-and-opaque region.
Sprinkle some comments about each region.
Re-uses the view's clipped region to determine visible-and-opaque region
which is accumulated (for both renderer and HW planes cases) into
occluded_region. The current view's clipped_region is then checked against
occluded_region.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
We can determine if the pixel format used by the clients buffer is
scan-out capable much sooner, so do it when constructing the zpos
candidate list. It also removes the checks in their respective
prepare_ functions.
Avoids the situation where we'd need to retrieve the DRM framebuffer each time
when checking the pixel format.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
function
The idea is to place pixel the format checks in a common part and until
then, to make it available as a function so we can re-use easily.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
In order to better optimize view assignment to HW planes, we construct
an intermediary zpos candidate list which is used aggregate all suitable
planes for handling scan-out capable client buffers.
We go over it twice: once to construct it and once to pick-and-choose a
suitable plane based its highest zpos position.
In order to maintain the view order correctly we track current zpos
value being applied to the plane state and use it when trying to place
a view into a plane.
Pass the computed zpos value to be applied to the plane state.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
This is based on the assumption that overlays are in between cursor and
primary plane and it is required to be able to assign views to planes,
even if the driver doesn't not expose such property.
As we hard-code them as immutable the commit part would not need any
further modifications.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Functional no change, as nobody makes use of it. Only apply the zpos
value if the zpos property is mutable (that is, zpos_max and zpos_min
are not the same).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Due to an error in driving GitLab, this commit erroneously contained the
entirety of !267 (zpos support in the KMS backend) squashed into one
single commit, pushed into master.
In order to keep the history clean, this is being reverted; a rebased
version of !267 with the clear individual commits which were already
present will be applied in its place.
This reverts commit 95e3b0deae.
Emmanuel Gil Peyrot
Stefan Agner
Leandro Ribeiro
Daniel Stone
Vivek Kasireddy
Marius Vlad
Pekka Paalanen
Eero Tamminen
Nicholas Niro