Before this commit, weston-launch returned 0 if weston was killed by a
signal. This makes it hard to automatically test weston by using
weston-launch, as there is no way to know why weston was terminated.
This commit makes weston-launch return 10+N instead, where N is the code
of the signal that terminated weston. 10 was chosen because it allows a
script to distinguish it from the case that weston-launch itself was
killed by a signal (128+N), and does not overlap the standard exit codes
defined in sysexits.h.
Partial fix for https://bugs.freedesktop.org/show_bug.cgi?id=60935. I
can't reproduce the SIGHUP using the fbdev backend.
v3: better commit message.
Resolve a bad frame visible when maximizing toytoolkit programs with the the
maximize button in decorations. Windows now use wl_display.sync requests to
wait for a maximize to finish before drawing again, following suggestions from
http://lists.freedesktop.org/archives/wayland-devel/2013-February/007650.html
Surface will preserve its rotation transformation when maximizing, which
will cause inconsistencies (eg. no window shadows drawn)
This patch removes rotation from maximized surface and restore it when
unmaximizing (just like in fullscreen mode)
To remain consisten with client side window, which blocks moving and
resizing of window in maximized state, we should do so on the compositor
side as well.
(until there is some unmaximize notification from server, which will
allow window to start drawing shadows and revert itself to toplevel
state)
Implements surface transform inheritance. A 'parent' pointer is added to
weston_surface::geometry, and is automatically used by
weston_surface_update_transform(). When updating the transform, the
parent transform is updated as needed, too.
shell_map_popup() is converted to use the new
weston_surface_set_transform_parent() function. Now, if we moved the
popup's parent surface while the popup is open, the popup surface will
stick to the parent properly.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Instead of directly setting the dirty flag on weston_surface geometry,
use a function for that.
This allows us to hook into geometry dirtying in a following patch.
Also add comments to weston_surface fields, whose modification causes
transform state to become outdated.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Remove redundant geometry dirtying from surface_commit() to simplify
further changes.
This code was added in commit 5df8ecac5d
"compositor: Fix partial repaints"
as the fix to:
https://bugs.freedesktop.org/show_bug.cgi?id=56538
The issue fixed by that commit was making the geometry dirty on every
attach, which caused full-surface repaints every time. The bug was
probably introduced by the opaque region changes during implementing
wl_surface.commit. The mentioned commit fixes the opaque handling by
comparing the new and old regions.
However, the commit also introduces additional checks that set
geometry.dirty. In the current code base, this should be unnecessary.
If the pending.sx or pending.sy are not zero, or if the surface size
changes, the configure() hook is responsible for applying the new
values, and so also marking the geometry dirty.
The configure() hook is only called, if there has been a new
wl_surface.attach. Nothing else can change these variables, so this
should be enough.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
When an axis (scroll) event results in a key binding function
being executed, eat the scroll event so the underlying window
doesn't receive it.
Thanks to Scott Moreau for helping me solve this.
Now that we have EXT_buffer_age in mesa, we should stop assuming double
buffering and use the buffer age instead.
Note: this will cause system without the extension to repaint the whole
screen every frame.
Before this change, surface->clip would contain the region of this the
surface that is obscured by opaque containing of other surfaces in any
plane. If a surface was obscured only by a surface in another plane and
the renderer was told to draw that region, the rendering would be
clipped because of that.
This patch changes the clip to be plane specific, so that it contains
only the region of the surface obscured by other surfaces in the same
plane. We also calculate a per plane clip, so that we don't tell the
renderer to draw regions of the primary plane that are obscured by
other planes. This damage remains on the primary plane until the its
clip changes so that they are not obscured anymore.
The core uses this region to clear from the primary plane damage the
area that was repainted. If we add the old buffer damage to that, it
may end up clearing more damage from the primary plane than it was
intended.
The current semantics would implicitly attach the most recently attached
buffer at commit time and send a release event when the buffer enventually
was released. The implicit attach is a little too subtle though and this
patch changes the semantics to always only send release events in response
to an attach event. As a consequence, once a compositor releases a buffer,
it no longer has a reference to it and wl_surfcea.damage is undefined.
Thus, the client side visible change is that damage request must always
be preceeded by a wl_surface.attach request, to ensure there's a valid buffer,
even if that means attaching the same buffer again.
Nothing else calls weston_buffer_post_release and the ref-counting and
sending the release event is essentially what weston_buffer_reference is
all about.
We subtract the screen space opaque region from the transformed surface
region. That's going to fail for when we're scaling up a surface, since
the surface bounding box for the scaled up surface is going to be bigger
than the opaque region. Instead, subtract the surface-space opaque region
from a 0,0 - width,height region and see if that's empty.
move_client() needs to attach the buffer, even if it was attached already,
because since 184df50 configure() will be called only on newly attached
surfaces, but the one that sets the test surface position is the configure
function.
We never init this, so we need to copy over the position matrix and then
overwrite the translation entries to make sure we have a valid matrix.
Thanks to Pekka for spotting this (twice).
This way the shell can know when a surface has been unmapped by
checking the value returned by weston_surface_is_mapped(surface).
The configure handlers have now width and height parameters, so
they do not need anymore to check manually the buffer size.
If a surface's buffer is NULL the width and height passed to the
configure are both 0.
Configure is now only called after an attach. The variable
weston_surface.pending.newly_attached is set to 1 on attach, and
after the configure call is reset to 0.
The issue was that touch::down event from the compositor to client apps
would send the previous motion events coordinates and this obviously made
the client do the wrong thing. This happened because we were not waiting
for a SYN event to come from evdev before sending down, motion or up events.
https://bugs.freedesktop.org/show_bug.cgi?id=51909
If there was a fullscreen surface using driver mode when a vt switch is
triggered, but something caused it to be gone when switching back (such
as the client being killed), a call to drm_output_switch_mode() is made
to restore the old mode, and that sets the output's current drm_fb to
NULL, so that the new mode is set drm_output_repaint(). This led to a
crash in vt_func(), because it tried to access output->current for
restoring the old mode.
Fix this by not setting the mode if there's no current fb. Instead,
schedule a repaint so that the mode is set in drm_output_repaint().
https://bugs.freedesktop.org/show_bug.cgi?id=60675
DIST_SUBDIRS should be used for corner cases only, not for conditional
SUBDIRS:
If `SUBDIRS' is defined conditionally using Automake conditionals,
Automake will define `DIST_SUBDIRS' automatically from the possible
values of `SUBDIRS' in all conditions.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Previously, when coming back from idle the compositor would try to
track if the unlock signal needed to be sent, and the shell would
change the compositor state in order to track when to display or
hide the screensaver.
This patch finishes moving this out of the compositor. With this, the
compositor state should be changed only using the exported functions
weston_compositor_wake() and weston_compositor_sleep(). The unlock
signal will be sent if the compositor wasn't in the ACTIVE state
previously. The lock signal is sent when the compositor becomes idle.
The calls to weston_compositor_wake() in the shell where there to allow
it to trigger the fade in only after the lock surface was configured.
Now the shell has full control of the fade and does not needed to
change the compositor state to do that, so those calls were replaced
with shell_fade() calls.
Previously, the shell would change the idle_time of the compositor to
the screensaver timeout and wake the compositor again, so that after
the timeout the compositor would fade to black and then the shell would
receive the lock signal again and would set the dpms state of the
outputs to off.
Instead, use a screensaver-specific timer for that, and call lock
without the back and forth between the shell and core Weston.
Previously, it was impossible to override the fade in/out behavior of
Weston using a different shell, since this was implemented in core
Weston. This also led to complicated interaction between the shell and
the core when displaying lock surfaces and screensavers.
This patch starts to solve this issue by moving the fade animation out
of the core. On compositor.c, besides deleting the fade code, the idle
handler had to be changed to emit the lock signal, since it was called
from the fade_frame() function before. This causes a slight change of
behavior, since before the fade would happen with the compositor being
active, while now it is already in the idle state. That leads to the
dpms state being set when cancelling the fade with mouse movement, and
in turn, to a slight freeze with drm compositor. This problem will be
fixed in a follow up patch.
On the shell side, the fade was re-implemented in a slightly different
manner. Instead of using a custom frame function, the fade animation
from animation.c is used. The interface for starting the fade was also
changed to take the value of an enum instead of a float alpha value,
in order to improve readability.
The function weston_surface_animation_frame() would schedule a repaint
on all outputs, as weston_surface_schedule_repaint() didn't exist when
it was implemented.
Scott Moreau
Emilio Pozuelo Monfort
Siddharth Heroor
Philipp Brüschweiler
MoD
Rafal Mielniczuk
Pekka Paalanen
Rune K. Svendsen
Ander Conselvan de Oliveira
John Kåre Alsaker
Andre Heider
Kristian Høgsberg
Giulio Camuffo
Satyeshwar Singh
Quentin Glidic