Apparently it's possible for a compositor to advertise seats with
different versions on the same connection, so this makes us more robust
against that dubious behaviour.
This also tracks the seat version we requested instead of the advertised
maximum.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: David FORT <contact@hardening-consulting.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston commit f7bb9352 requires recent libwayland changes for providing
‘WL_POINTER_RELEASE_SINCE_VERSION’. Increase the version requirement to
indicate that current weston git requires development version of
wayland.
NOTE: At release we should probably increase the wayland requirement for
weston to 1.10.0.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
IVI-Shell is designed to be used with other controller modules
than hmi-controller.These controller modules require
the ivi-layout-export header file to properly integrate
with the ivi-shell. The header file should be installed
when ivi-shell is enabled, because these controller modules
are not a part of the weston repository.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
In commit 70d337dfd we changed one cursor size test from a hard coded 64,64
to the actual device provided width, height.
The test in drm_assign_planes remained fixed at 64, 64.
The simple-shm test ended up being small enough to fit into a cursor plane
by one test, but too large by the test in drm_assign_planes. We'd assign
to the cursor plane but not keep a reference.
weston-simple-shm would disappear and be replaced with the previous
cursor image.
This partially "fixes" T3361.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The screenshooter encoder wrote the output from either top-to-bottom or
bottom-to-top, depending on the Y-flip setting, but wcap-decode only
decodes from bottom-to-top. Make the encoder always output from
bottom-to-top, to match the decoder, and flip the input (source)
according to the Y-flip setting.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
We're going to need this on device removal in the future, so pull it out
into a separate function now.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
commit f814c5dc9 changed get_output_work_area behaviour
which broke the code for positioning maximized window.
The x position was set to 2*output->x instead of to output->x
fix https://bugs.freedesktop.org/show_bug.cgi?id=92357
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
This patch adds the missing calls to release when the seat has capabilities
changes. It also fixes a missing release of the touch object and a leak with
old clients.
Signed-off-by: David FORT <contact@hardening-consulting.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When new client registers touch listener, it was added to focus resource list.
At this point if another client "without" touch listener is in focus then
subsequent touch events are sent to new client with another client's resources
causing new client to stop rendering.
Now new client is added to resource list by default and it'll be added to focus
resource list only if its in focus.
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Adds a config item to prevent doxygen from using absolute paths in
generated diagrams. This trims off the base directory during config to
leave just relative paths.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
get_shell_surface(parent) may return NULL if the client passed a
unassigned wl_surface or a wl_surface with a non-shell surface role
(such as cursor role).
https://bugs.freedesktop.org/show_bug.cgi?id=92316
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Transient surfaces use child/parent surfaces for stacking order. This
change resloves an issue in which attempting to move or rotate a
toplevel transient surface can move or rotate its ancestor.
Free move before return if animation is null.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Calling weston_compositor_destroy() on a pointer returned by
weston_compositor_create() should be always valid, even if the
compositor does not have yet a backend.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
The internal API "get_weston_view" is introduced, which returns the
weston_view of the given ivi_layout_surface. The API returns a NULL
pointer, if the ivi_layout_surface does not have any weston_view.
The weston_view is required in many places of ivi-shell implementation.
Therefore, this API will reduce lines of code. Furthermore, it will
increase the maintainability of the ivi-shell implementation.
Old way of getting the weston_view was flawed, because the views list of
the weston_surface is read without controlling the existence of the
weston_surface. New implementation explicitly throws an error if the
weston_surface does not exist.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
[Pekka: Line-wrapped the commit message.]
This internal API is redundant, because a surface is allowed to be only
on one layer.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
This internal API is redundant, because a layer is allowed to be only on
one screen.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
link_layer's sole purpose is to link a surface to multiple layers, if
the surface should be shown in multiple layers. This can be only
achieved, if the surface has multiple weston_views with different
transformation matrices.
Current implementation assumes in many places that a ivi_surface has
only one weston_view. Therefore, a surface can be only shown on one
layer.
Although this (a surface on multiple layers) is a nice to have feature
for ivi-shell, it is not very crucial. In any case, it is not an easy
task to implement this feature, because it has lot of corner cases.
I removed with this patch the link_layer data structure, because it does
not have any purpose in current implementation.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
[Pekka: Line-wrapped the commit message.]
link_screen's sole purpose is to link a layer to multiple screens, if
the layer should be shown in multiple screens. This can be only
achieved, if surfaces of the layer have multiple weston_views dedicated
to the different screens.
Current implementation assumes in many places that a ivi_surface has
only one weston_view. Therefore, a layer can be only shown on one
screen.
Although this (a layer on multiple screens) is a nice to have feature
for ivi-shell, it is not very crucial. In any case, it is not an easy
task to implement this feature, because it has lot of corner cases.
I removed with this patch the link_screen data structure, because it
does not have any purpose in current implementation.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
[Pekka: Line-wrapped commit message.]
Right now many toolkits (toytoolkit, gtk+ and EFL) will send an
ack_configure request immediately in response to a configure event,
even if they're not immediately committing the surface at that time.
This leads to a situation where multiple configures receive ack_configure
before any commit happens.
There's really no reason for that sequence of events to bother a compositor,
so this just clarifies the language to make it ok.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Check the return from layout_transition_register in order to fix
potential leak of memory pointed to by transition. And don't register a
null transition.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The xwm gets a primary view for a X window using the get_primary_view
vfunc of the shell_interface struct. Storing it is dangerous though
because it doesn't listen for its destruction so it may end up using the
old stored view pointer after that view was freed, or after the primary
view for that window was changed to another one.
Fetch the primary view just before using it every time and try to not
abuse this 'primary view' concept which may map badly to some shells:
iterate over all the views instead when it makes sense.
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Otherwise, auto-enable depending on whether the system has the necessary
libraries.
[Updated help text as per pq suggestion -- bwh]
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Systemd notifications support was converted into loadable
module, so systemd-notify.h header is not needed.
Signed-off-by: Egor Starkov <egor.starkov@ge.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
[Pekka: manually applied]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Starting from systemd version 209, a single libsystemd.pc is provided.
For previous versions, fall back on libsystemd-login.pc.
Signed-off-by: Frederico Cadete <frederico@cadete.eu>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
This mirrors what 5ffb440c3f did for
compositor-x11, and allows testing without having to restart the
compositor-drm everytime.
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add systemd status and watchdog notification support.
Feature is not compiled by default and can be enabled by
"--enable-systemd-notify" configuration flag. It compiles
into module "systemd-notify.so" and can be loaded by
adding it in weston.ini like any other module, i.e.
"modules=systemd-notify.so". Watchdog timeout equals to
half of timeout defined by "WATCHDOG_USEC" environment
variable, which is set by "WatchdogSec=" setting in
service file.
Signed-off-by: Egor Starkov <egor.starkov@ge.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
These routines provide test cases an ability to capture screen images
for rendering verification.
This commit is a no-change refactoring, except for making the routines
non-static. Makefile rules are also updated; most notably, this links
test clients against the cairo libraries now.
v2: Fix pointer code styling, suggested in review
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
We really don't want to deal with sighups and pids. It's far easier
to just deal with the client destroyed signal to respawn the input method.
Inspiration taken from Pekka's commit 826dc14ec4
This fixes a potential crash on shutdown. If the input method client
pointer is still set (sighup handler hasn't run) but the client is
already destroyed, a call to text_backend_destroy() will try to destroy
the client a second time resulting in a segfault.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The binding is only used for preventing launch, and we've already got the
pid for that.
With multiple seats there are multiple bindings, so if the most recent
binding unbinds it will clear the pointer, so using it like this is risky
anyway.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Previously we tried to launch the input method every time a seat was
created, and the launch function would notice it was running and not
bother to actually launch.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
In the launcher split up patch WESTON_LAUNCHER_SOCK was accidentally
changed to WESTON_LAUNCH_SOCK
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Bryce Harrington
Derek Foreman
Giulio Camuffo
Ucan, Emre \(ADITG/SW1\)
Bill Spitzak
Tomohito Esaki
Marko
Marek Chalupa
FORT David
Chokshi, Mitul
Nicolas Guyomard
Jon Cruz
Jonas Ådahl
Chris Michael
Ben Hummon
Lucas Tanure
Frederico Cadete
Egor Starkov
Benoit Gschwind
Emmanuel Gil Peyrot