Add a mode argument to weston_buffer_reference which indicates whether a
buffer's storage may/will be accessed, or whether the underlying storage
will no longer be accessed, e.g. because it has been copied. This will
be used to retain a pointer to the weston_buffer whilst being able to
send a release event to the client.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rather than calling accessors (wl_shm_buffer_get etc) to figure out
which type our buffer is, just look in the structure.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In 913d7c15f7 stricter error checking was
introduced to the strtol call, which broke reading backlight values.
Since every sysfs backlight file ends with a newline.
As noted in a comment in the previous MR to prevent damaged pointers
after calling asprintf, replace every asprintf call with str_printf.
Previous-MR: https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/543
Signed-off-by: Sören Meier <soerenmeier@livgood.ch>
The repaint_data is entirely backend specific. Moreover, it is only used by the
drm backend, while other backends ignore the repaint data.
There will always be only one repaint active, thus, there is no need to pass the
repaint data from the outside.
The repaint_data breaks with the multi-backend series, which calls repaint begin
for all backends to get the repaint_data. The repaint_data of the last backend
will then be passed to all other backend. At the moment, this works, because the
drm backend is the only backend that implements the begin_repaint call.
Another option would be to track the repaint data per backend in the compositor,
but actually, it the backend needs to track state across the calls, it's its own
responsibility.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The pending_state is already stored in the backend and can be directly retrieved
from there.
This avoids involving the compositor in passing state between the repaint
phases for a single backend.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
This doesn't work with any of the launchers we've kept. Remove the option
and all the bits that handle it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Moving forward we're going to be supporting libseat and logind as our
only launchers. We're doing this to reduce our maintenance burden,
and security impact.
Libseat supports all our existing use cases, and seatd can replace
weston-launch so we no longer have to carry a setuid-root program.
This patch removes weston-launch, and launcher-direct, leaving only
libseat and logind.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Zoom is a neat trick, but in its current form it's very hard to test
and maintain.
It also causes output damage to scale outside of the output's boundaries,
which leads to an extra clipping step that's only necessary when zoom
is enabled.
Remove it to simplify desktop-shell and compositor.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Specifically log if there were no suitable planes for us to use, or if
we tried to place it on a plane but were told no by the kernel.
Signed-off-by: Daniel Stone <daniels@collabora.com>
There's no real reason for these to be separate now that the eligibility
checks have been moved up so we don't call them unless it makes sense.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We just copy the SHM buffer straight into a separately-allocated GBM BO,
so no need to take a reference on the buffer itself or keep it from
being released.
All drm_output_try_view_on_plane really does at this point is to call
the prepare_*_view function for the requisite plane type, and take a ref
on the weston_buffer from the client. Given that we don't need to keep
the client buffer alive, we can short-circuit
drm_output_try_view_on_plane, and instead just call
drm_output_prepare_cursor_view directly when we have a cursor plane.
This also makes it easier to just remove drm_output_try_view_on_plane in
following patches when we merge the overlay/scanout plane path into one.
Doing so gives us two clearly-separated paths: one for copying a SHM
client buffer into a cursor, and another for directly scanning out
client content.
Signed-off-by: Daniel Stone <daniels@collabora.com>
At some point this got hobbled, such that NO_PLANES and
NO_PLANES_ACCEPTED became the same thing, so we can just check if the
returned plane_state is NULL or not.
Signed-off-by: Daniel Stone <daniels@collabora.com>
For views which cover the entire output, we always attempt to place them
on the primary plane, to avoid a situation where we place a fullscreen
view into an overlay plane and then have to disable the primary plane,
which doesn't always work.
Move this check earlier, so we don't consider overlay planes to be
candidates for fullscreen views. This check should be changed in future
to only filter for opaque views, but that's for another time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We shouldn't get down into trying to place a view on a cursor plane if
these checks are not met, so change them to asserts rather than early
returns.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we introduced support for variable zpos, we did so by filtering the
list of acceptable planes and then creating a separate zpos-ordered
list. Now that the planes are already zpos-sorted in the backend list,
and we have more early filtering, we can replace this with a single
plane-list walk.
Signed-off-by: Daniel Stone <daniels@collabora.com>
For better or worse, cursor planes can only be used by uploaded SHM
buffers right now, so ignore them when we're calculating the acceptable
plane mask for client dmabufs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we're in renderer-only mode, we can only use the renderer and the
cursor plane. Don't even try to import client buffers as it makes no
sense.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we have a SHM buffer, it can only go into a cursor plane - and only
then if it's of the right format.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Each output is hardcoded to the use of a single 'special' (primary or
cursor) plane; make sure we don't try to steal them from other outputs
which might not be happy to discover that we've taken it off them.
Signed-off-by: Daniel Stone <daniels@collabora.com>
GBM is how we import all our client content into DRM FBs, so don't try
anything other than renderer-only without it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It's possible to write this with a few less twisty special cases. Tested
manually with a randomly-distributed input tree as well as manually
trying to hit special cases around first/last entries.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Transforming the scanout damage by the zoom will result in rectangles
outside of the display, and some with negative co-ordinates. This makes
at least some drivers unhappy (tested on vmware), and the page flip fails,
and weston hangs indefinitely.
Clip the damage to the output so we don't fall down.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
When EGL initialization fails (failure to create a GLES3 or GLES2
context) we will end up calling gbm_device_destroy() twice, once
in init_egl() and once in the drm_backend_create() error path.
Given that we should also take care of properly destroying the gbm
device when we don't have any inputs for instance, mark the gbm device
as NULL to avoid calling gbm_device_destroy() once more when destroying
the DRM-backend.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Walking the format/modifier list to try to find out if our FB is
compatible with the plane is surprisingly expensive. Since the plane's
capabilities are static over the lifetime of the KMS device, cache the
set of planes for which the FB is theoretically
format/modifier-compatible when it's created, and use that to do an
early cull of the set of acceptable planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we first create a drm_fb from a weston_buffer, cache it and keep it
alive as long as the buffer lives. This allows us to reuse the gbm_bo
and kernel-side DRM framebuffer, rather than constantly creating and
destroying them at every repaint. The overhead of doing so (e.g. MMU
updates) can be significant on some platforms.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently each drm_fb takes a reference on a client buffer it wraps.
This prevents us from being able to reuse a drm_fb in multiple places
(e.g. two views of the same client buffer) simultaneously, or even back
to back.
Move the buffer reference to the plane state, as preparation for
allowing drm_fb to be cached inside the weston_buffer.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently we take a reference on the underlying client buffer every time
we materialise a drm_fb from a view, and release it when the drm_fb is
destroyed. This means that we need to create and destroy a drm_fb every
time we want to use it, which is pathologically unperformant on some
platforms.
To start working towards being able to cache drm_fb, only take the
reference when we apply it to a plane state.
Signed-off-by: Daniel Stone <daniels@collabora.com>
No sense walking the plane list every frame if we can't use it because
it's neither a SHM buffer nor a client buffer we can directly import as
a framebuffer.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In commit "libweston: add initial dma-buf feedback implementation" we've
added initial support to dma-buf feedback, but it was not using the
feedback from DRM-backend to add useful per-surface feedback.
In this patch we add this. The scanout tranche of the per-surface
feedback is based on the union of formats/modifiers of the primary and
overlay planes available. These are intersected with the
formats/modifiers supported by the renderer device.
Also, it's important to mention that the scene can change a lot and we
can't predict much. So this patch also adds hysteresis to the dma-buf
feedback. We wait a few seconds to be sure that we reached stability
before adding or removing the scanout tranche from dma-buf feedback and
resending them. This help us to avoid spamming clients and leading to
unnecessary buffer reallocations on their end.
Here's an example of what we want to avoid:
1. We detect that a view was not placed in a plane only because its
format is not supported by the plane, so we add the scanout tranche
to the feedback and send the events.
2. A few milliseconds after, the view gets occluded. So now the view
can't be placed in a plane anymore. We need to remove the scanout
tranche and resend the feedback with formats/modifiers optimal for
the renderer device. The client will then reallocate its buffers.
3. A few milliseconds after, the view that was causing the occlusion
gets minimized. So we got back to the first situation, in which the
format of the view is not compatible with the plane. Then we need to
add a scanout tranche and resend the feedback...
This patch is based on previous work of Scott Anderson (@ascent).
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add enum try_view_on_plane_failure_reasons to help us to keep track of
the reason why promoting view to a plane failed. We also add a variable
to struct weston_paint_node so that we can update this information in
each output repaint.
This will be used in the next commits, in which we add proper surface
dma-buf feedback support.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reported in !179 adding weston_output_repaint_failed resets the output
Co-authored-by: Daniel Stone
Co-authored-by: Julius Krah
Signed-off-by: n3rdopolis <bluescreen_avenger@verizon.net>
The API expects uintptr_t (good!), but we're passing an unsigned long
here. Make the conversion explicit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Daniel Stone
Sören Meier
Michael Tretter
Derek Foreman
Marius Vlad
Leandro Ribeiro
nerdopolis