If for some reason the desktop-shell plugin would configure a panel with
an invalid size, just destroy the whole panel and forget about it for
this wl_output.
A following patch will cause desktop-shell to configure 0x0 panel when
it deems the panel redundant.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
If for some reason the desktop-shell plugin would configure a background
with an invalid size, just destroy the whole background and forget
about it for this wl_output.
A following patch will cause desktop-shell to configure 0x0 background
when it deems the background redundant.
Fortify weston-desktop-shell against not every output having a
background.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Since formats is an out parameter, we need to copy to the alloc'ed
memory and not over the pointer address.
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The cairo surface used for the icon must be completely given to the
frame as soon as said frame has been created. To prevent both the
window and the frame from sharing ownership of the icon, we set
window->icon_surface back to NULL right after creating or changing the
frame, only keeping it there when no frame has been created yet.
Fixes https://lists.freedesktop.org/archives/wayland-devel/2018-January/036655.html
Reported-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Setting state_invalid to true is moved together with the code adding new
unused CRTCs and connectors in drm_output_deinit(). Logically these two
operations belong together: state_invalid is required for the new unused
item to be turned off.
This does not hinder initial turning off of outputs, because on
compositor start-up, state_invalid is initialized to true, making calls
to drm_output_disable() for non-enabled outputs a no-op.
Previous changes already ensure that if a compositor does not explicitly
enable an output, the CRTC and connector will be turned off even without
an explicit disable (provided there is a at least one enabled output).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Rather than smashing the state to disable a CRTC immediately, just
delegate that to the normal repaint cycle by setting state_invalid =
true. drm_pending_state_apply() will pick up the unused_crtcs.
A caveat here is that we have no enabled outputs at all, we will never
enter repaint, and so CRTCs do not actually get turned off until we get
at least one output to drive.
However, this should help the problem reported here:
https://lists.freedesktop.org/archives/wayland-devel/2018-January/036713.html
Arguably it is better to leave an output spuriously on in rare cases
rather than fail modeset completely in somewhat more common cases.
My personal motivation for this change is that it helps if we later move
CRTC allocation to output enable/deinit instead of create/destroy,
because then the CRTC will not be available here for initial turn-off as
the output has not been enabled to begin with.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Our case is when the view is the same as output being disabled/disconnected.
There's not need to check the views' output with the output being disabled
because weston_view_assign_output() already changes the output of the view when
the output has been disabled/disconnected hence the check is not needed at all.
The views' output will always be different than the output being disabled.
By the time shell_output_destroy_move_layer() gets called the views' output has
already changed to a "free" output. Tested this by unplugging/disabling the
output on purpose.
Signed-off-by: Marius Vlad <marius-cristian.vlad@nxp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This was used from the crash handlers, which do not exist anymore.
Nothing calls restore, so delete the dead code.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Catching an ABRT is kind of ok, catching a SEGV is russian roulette. We
have been quite lucky with it, but I've started hitting crashes inside
malloc() which causes a deadlock when our SEGV handler needs to malloc()
as well (weston_log_timestamp()).
One reason to catch SEGV and ABRT was to attempt to restore the VT on
the DRM-backend. Nowadays that job is done by logind or weston-launch.
The signal handler also printed a backtrace, which for me personally has
been extremely helpful. Arguably it's not necessary though, when we have
core files and services that catch cores. For instance, if using
systemd, 'coredumpctl gdb' is delightfully easy for getting into the
saved core.
Therefore, this code does more harm than it is useful, so remove it. We
also drop an optional dependency to libunwind.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
If XDG_PICTURES_DIR not given, it will use the current directory, as
it was before.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Instead of assuming the file prefix contains the path and filename
prefix, give these two items separately.
A NULL or empty string path may still be given to refer to the current
directory.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Instead of overwriting the 'wayland-screenshot.png' file over and
over, store each requested screenshot in a filename based on timestamp
and sequence number.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Reviewed-by: Daniel Stone <daniels@collabora.com>
if the layer is in order of some screen we need to remove it
from there and mark the screen order as dirty so it will be removed
in commit_screen_list call later
layer should only be assigned to one screen at a time
Signed-off-by: Eugen Friedrich <efriedrich@de.adit-jv.com>
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
it is assigned in weston_view_assign_outputs
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
it is not necessary to repaint all outputs after
each commit_changes. Only outputs with modified
views has to be repainted.
We need to call weston_view_update_transform
for assigning views to outputs first.
Then, We can call weston_view_schedule_repaint
to trigger repaint for outputs.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi_layout_layer_set_visibility has bool
as argument.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
commit e7fff215ad made initializing the
selection_listener conditional, but didn't make its clean-up
conditional at shutdown. Simply initializing the listener's list
link at init time makes this harmless.
To see this, run weston -Bheadless-backend.so and then connect to it
with an X client. When killing weston it will attempt shutdown but
die with a segfault.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
it has only developermode option parameter.
The parameter is only used in init_ivi_shell.
Therefore, we can basically remove the struct,
and check the option locally in the function.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
controller modules can be loaded as weston modules
from the main function of weston.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It is better to load ivi controller modules as a
generic weston module. Then, we do not need to
have a specific ivi way of loading modules.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston loads hmi-controller as a weston module.
IVI-shell does not need to load it explicitly.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Put the interface into hmi_controller struct.
It is better to have it in an object.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Now only libshared (and libshared_cairo) requires this.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Replace every use of DATADIR to create a filename with a call to the new
function that allows overriding DATADIR with an env var at runtime.
No attention is paid to asprintf failure.
This restores make distcheck to a passing state after commit 6b58ea
began checking cairo surfaces for validity and exchanged undefined
behaviour we shouldn't have been dependent on for consistent test failure.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: split if-branches into two lines]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Set the env var to override the system data directory so we can run
tests with uninstalled icons.
We don't yet use the code that checks this env var, so make distcheck
will still fail.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Currently we look for png files in their install directory, and we
manufacture filenames with string pasting at compile time.
This new function will allow overriding the compile time setting with
the env var WESTON_DATA_DIR so we can do neat tricks like allow our
test suite to pass when we haven't yet installed icons system-wide.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: split if-branch into two lines.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add support for using the atomic-modesetting API to apply output state.
Unlike previous series, this commit does not unflip sprites_are_broken,
until further work has been done with assign_planes to make it reliable.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Co-authored-by: Louis-Francis Ratté-Boulianne <louis-francis.ratte-boulianne@collabora.com>
Co-authored-by: Derek Foreman <derek.foreman@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
For atomic modesetting support, the mode is identified by a blob
property ID, rather than being passed inline. Add a blob_id member to
drm_mode to handle this, including refactoring mode destruction into a
helper function.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Set the atomic client cap, where it exists, and use this to discover the
plane/CRTC/connector properties we require for atomic modesetting.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When leaving Weston, don't attempt to restore the previous CRTC
settings. The framebuffer may well have disappeared, and in every
likelihood, whoever gets the KMS device afterwards will be repainting
anyway.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than a smattering of error handlers, use consistent jump labels
for error paths in create_output_for_connector().
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than open-coding it ourselves, use the new apply_state helper in
drm_output_start_repaint.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Fabien DESSENNE <fabien.dessenne@st.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Split repaint into two stages, as implied by the grouped-repaint
interface: drm_output_repaint generates the repaint state only, and
drm_repaint_flush applies it.
This also moves DPMS into output state. Previously, the usual way to
DPMS off was that repaint would be called and apply its state, followed
by set_dpms being called afterwards to push the DPMS state separately.
As this happens before the repaint_flush hook, with no change to DPMS we
would set DPMS off, then immediately re-enable the output by posting the
repaint. Not ideal.
Moving DPMS application at the same time complicates this patch, but I
couldn't find a way to split it; if we keep set_dpms before begin_flush
then we break DPMS off, or if we try to move DPMS to output state before
using the repaint flush, we get stuck as the repaint hook generates an
asynchronous state update, followed immediately by set_dpms generating a
synchronous state update.
In drm_output_update_complete, the *_pending flags are cleared
before any of the pending actions are taken; this ensures that the
actions cannot recurse.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If we have an unused CRTC or connector, explicitly disable it during the
end of the repaint cycle, or when we get VT-switched back in.
This commit moves state_invalid from an output property to a backend
property, as the unused CRTCs or connectors are likely not tracked by
drm_outputs. This matches the mechanics of later commits, where we move
to a global repaint-flush hook, applying the state for all outputs in
one go.
The output state_invalid flag originally provoked full changes on output
creation (via setting the flag at output enable time) and session enter.
For the new-output case, we will not have any FB in output->state_cur,
so we still take the same path in repaint as if state_invalid were set.
At session enter, we preserve the existing behaviour: as
start_repaint_loop will fail when state_invalid is set, all outputs will
be scheduled for repaint together, and state_invalid will not be cleared
until after all outputs have been repainted, inside repaint_flush.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rather than a more piecemeal approach at backend creation, explicitly
track connectors and CRTCs we do not intend to use, so we can ensure
they are disabled where appropriate.
When we have an updated list of connector and CRTC IDs, we add any which
are not owned by an enabled drm_output to the list. We remove them from
the list when drm_output_repaint() is called for that output, and re-add
them when the output is disabled or destroyed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Support adding a test seat using the weston_test.device_add request.
This will be used in tests in upcoming commits where we will need to
re-add the seat after having it removed.
We only support one test seat at the moment, so this commit also
introduces checks to ensure the client doesn't try to create multiple
test seats or try to remove an already removed test seat.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Ensure the server can safely handle client requests for wl_touch
resources that have become inert due to a weston_touch object
destruction.
This change involves, among other things, setting the weston_touch
object, instead of the weston_seat object, as the user data for wl_touch
resources. Although this is not strictly required at the moment (since
no code is using the wl_touch user data), it makes the code safer:
* It makes more sense conceptually.
* It is consistent with how wl_pointer resources are handled.
* It allows us to clear the user data during weston_touch
destruction, so other code can check whether the resource is
inert.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Ensure the server can safely handle client requests for wl_keyboard
resources that have become inert due to a weston_keyboard object
destruction.
This change involves, among other things, setting the weston_keyboard
object, instead of the weston_seat object, as the user data for
wl_keyboard resources. Although this is not strictly required at the
moment (since no code is using the wl_keyboard user data), it makes the
code safer:
* It makes more sense conceptually.
* It is consistent with how wl_pointer resources are handled.
* It allows us to clear the user data during weston_keyboard
destruction, so other code can check whether the resource is inert.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There may be race condition between destroying surface and destroying
output. If handle_output_destroy() is called after surface is destroyed,
illegal memory access occurs when surface destroy signals is
unregistered from the panel/background. This patch fixes this issue and
removes unnecessary initialization for panel surface listener.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
XWM uses xcb-shape as of 332d1892bb, to exclude the shadow from the
input region. However, it does not explicitly link xcb-shape for the new
symbols; on one of my machines this is pulled in as a transient
dependency (masking the issue), but apparently not the other.
Solve it by explicitly linking xcb-shape and requiring it in configure.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Fixes: 332d1892bb ("xwm: do not include shadow in input region")
Cc: Ian Ray <ian.ray@ge.com>
This fetches the _NET_WM_ICON property of the X11 window, and use the
first image found as the frame icon.
This has been tested with various X11 programs, and improves usability
and user-friendliness a bit.
Changes since v1:
- Changed frame_button_create() to use
frame_button_create_from_surface() internally.
- Removed a check that should never have been commited.
Changes since v2:
- Request UINT32_MAX items instead of 2048, to avoid cutting valid
icons.
- Strengthen checks against malformed input.
- Handle XCB_PROPERTY_DELETE to remove the icon.
- Schedule a repaint if the icon changed.
Changes since v3:
- Keep the previous Cairo surface until the new one has been
successfully loaded.
- Use uint32_t for cardinals. Unsigned is the same type except on
16-bit machines, but uint32_t is clearer.
- Declare length as uint32_t too, like in xcb_get_property_reply_t.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Much like we already have to_drm_output and to_drm_backend.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The window frame was created with position and size which include
an offset for margins and shadow. Set the input region to ignore
shadow.
[daniels: Fixed type mismatch, removed unused variable.]
Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Scott Moreau <oreaus@gmail.com>
Up to now we could set the transform only on output initialization.
However, on certain situations(like tablets and convertible laptops),
screen orientation can change while the compositor is running and thus
the need for change of the output transform arises.
When the transform changes, we must update the output geometry,
output->region and output->previous_damage, as well as send this change
to clients. We also have to check whether any of the pointers are inside
the output which is being rotated. If this is the case, they are moved
to the new center, because otherwise the pointer is stuck outside of the
screen ans "lost" to the user.
What is more, after calling this function compositors should check if
any view is now outside of the screen and move it according to their
wish.
Signed-off-by: Ilia Bozhinov <iliyabo@hotmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
If the EGL_EXT_image_dma_buf_import_modifiers extension is not
supported, let gl_renderer_query_dmabuf_formats return a hardcoded
fallback list. That list contains ARGB8888, XRGB8888, and if the
GL_EXT_texture_rg extension is supported, YUYV, NV12, YUV420, and
YUV444.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Although the format event is deprecated, some clients, especially the
GStreamer waylandsink, only support zwp_linux_dmabuf_v1 version 1 and
require the deprecated format event.
Send format events instead of the modifier event, if the client binds on
a protocol version before version 3, skipping formats that only support
non-linear modifiers.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Stone <daniels@collabora.com>
modifier_hi and modifier_lo are set to 0 by clients,
which are not supporting modifiers. Modifier attributes
of buffers of these clients set to 0 too in linux-dmabuf.c
import_simple_dmabuf function in gl-renderer.c compares
modifier attribute of the buffer with DRM_FORMAT_MOD_INVALID.
DRM_FORMAT_MOD_INVALID is equal to ((1ULL<<56) - 1).
Therefore, modifer 0 is accepted as valid. Then, the function
checks support for eglQueryDmaBufModifiersEXT.
If it is not supported import_simple_dmabuf function is returning
NULL.
This patch sets the modifier attribute to DRM_FORMAT_MOD_INVALID
for clients which are not supporting modifiers. Without this patch
linux-dmabuf protocol is not working for not supporting clients.
Fixes: b138d7afb3 ("gl-renderer: Ignore INVALID modifier")
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Tomohito Esaki <etom@igel.co.jp>
The GL_EXT_unpack_subimage and GL_EXT_texture_rg are part of the core ES
3.0 specification, so also check the GL driver version in addition to
the extension string to determine if those features are supported.
This allows using those extensions on some GL drivers that do not expose
them in the extensions string, but still support OpenGLES3.
Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Pekka Paalanen
Philipp Kerling
Emmanuel Gil Peyrot
Marius Vlad
Aleksander Morgado
Emre Ucan
Derek Foreman
Daniel Stone
Alexandros Frantzis
Tomohito Esaki
Greg V
Ian Ray
Ilia Bozhinov
Philipp Zabel
Michael Tretter
Arnaud Vrac