Switch drm_output_find_by_connector() to search for the output by
iterating the compositor's head_list. drm_head_find_by_connector() will
be useful later on its own.
As of "compositor-drm: start migration to head-based output API" the
head list is guaranteed to contain all created drm_outputs through the
automatically created drm_head.
This simplifies the code a little, introduces
drm_head_find_by_connector(), and works towards the eventual removal of
drm_output_find_by_connector().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Helps debugging.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Move the responsibility of ensuring the head will work in the enabled
output to the backends.
A compositor cannot enable an output without heads, and removing the
last head from an output automatically disables the output, so attaching
a new head to an enabled output is only possible for clone mode.
Backends headless, rdp, and x11 forbid clone mode by not having an
attach_head hook implemented; fbdev and wayland explicitly deny clone
mode. Only the DRM backend is affected by this change and even that not
yet because MAX_CLONED_CONNECTORS is 1 in the DRM backend.
Also ensure a global is created for the head when attached to an enabled
output, and log it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Support attaching custom data to a weston_output by the traditional
destroy listener / wl_signal_get approach.
Needs a new destroy signal, because user data lifetime should be the
lifetime of the weston_output regradless of its enabled status. The old
destroy signal is for output consumers that only care about enabled
outputs in the system and gets emitted on disable, not on destroy.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
To let users pick an arbitrary name for an output, to be used as e.g. a
configuration key, add API to create an output with a given name. For
the same configuration purpose, add a search function as well.
For the search function to be predictable, forbid creating multiple
outputs with the same name. Previously, creating multiple outputs with
the same name would have needed detatching to create outputs from the
same head, now that is forbidden.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
This will be interesting to see when testing clone mode.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Remove the scaffolding that allowed backends to be converted one by one
to the head-based API. Nothing is using these members anymore.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Hook up the libweston facing head-based output API by introducing struct
drm_head, but leave it as a fake so that members can be migrated in
pieces in follow-up patches.
The DRM backend continues to create an output for each connected
connector only, and during output creation it also creates a drm_head
for it. This allows it to pretend it supports the head-based output API
as long as there is only one head per output ever attached.
create_output callback is fake, it will only look up the existing
drm_output by the head name.
Clones are not yet supported, hence max is defined to 1.
This unfortunately introduces some temporary code that will be revomed
later, but seems to be necessary to avoid a single big patch.
v6:
- add missing drm_head_destroy() call
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Follow the standard pattern used in the headless and x11 backend
migration, but also cater for the two other backend modes: --sprawl or
fullscreen-shell, and --fullscreen.
Stops relying on the implicit weston_output::head.
Unlike other backends, this uses the attach_head hook to do the
required head setup that is not possible to do without an output, but
must be done before weston_output_enable(). This also requires the
detach_head hook for the one case where the user attaches a --fullscreen
head and then detaches it without enabling the output.
It is a little awkward to fully initialize heads as late as attach, but
aside from the --sprawl/fullscreen-shell case, there is not really a way
to know the head properties without creating the parent wl_surface and
configuring it.
Heads/outputs created for parent outputs now have distinct names instead
of all being called "wlparent".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Add safeguards to make it painfully obvious if we ever get the pairing
of wayland_backend_create_output_surface() and
wayland_backend_destroy_output_surface() wrong. Helps catching bugs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Follow the standard pattern set by the headless backend which also uses
the the window output API.
Stops relying on the implicit weston_output::head.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Implement the head-based output API in this backend, and stop relying on
the implicit weston_output::head.
The split between fbdev_head and fbdev_output is somewhat arbitrary.
There is no hotplug or unplug, and there is always 1:1 relationship.
Struct fbdev_screeninfo could have been split as well, but it would not
have made much difference.
I chose fbdev_output to carry the mmap details (buffer_length is now
duplicated here), and fbdev_head to carry the display parameters and
device node path. The device node identifies the head, similar to a
connector.
The backend init creates a head. The compositor uses it to create an
output. Libweston core attaches the head automatically after creating
the output. The attach hook is a suitable place to set up the video
modes on the output as they are dictated by the head, it would be too
late at enable() time.
v7:
- use name argument instead of hardcoded "fbdev" in
fbdev_output_create()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Destroying the whole output in reenable would cause list walk
corruption: the loop over output_list in session_notify() is not using
wl_list_for_each_safe so output removal would break it.
Creating a new output is also problematic as it needs the compositor to
configure it, but that probably saved us from another list walk failure:
adding the new output to be list while walking the list, possibly
causing it to be destroyed and re-created ad infinitum.
Instead of a complete destroy/create cycle, just do our internal
disable/enable cycle. That will re-open the fbdev, re-read the
parameters, re-create hw_surface, and reinitialize the renderer output.
A problem with this is if fbdev_set_screen_info() fails. We do read the
new parameters, but we don't communicate them to libweston core or old
clients.
However, it is hard to care: to trigger this path, one needs to
VT-switch to another fbdev app which changes the fbdev parameters. That
is quite difficult as VT-switching has been broken for a good while for
fbdev-backend, at least with logind. Also fbdev_set_screen_info() would
have to fail before one should be able to tell something is wrong.
The real reason behind this patch, though, is the migration to the
head-based output API. Destroying and re-creating an output really does
not fit that design. Destroying and re-creating a head would be better,
but again not testable in the current state.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Follow the starndard patttern as the other backends, headless and x11 in
particular, to stop relying on the implicit weston_output::head.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Implement the head-based output API in this backend, and stop relying on
the implicit weston_output::head.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
If the idle_repaint() callback has been scheduled when a weston_output
gets destroyed, the callback will hit use-after-free. I have encountered
this when migrating the wayland backend to the head-based API, using
--sprawl, and closing/disconnecting one of the parent compositor
outputs.
Store the idle_repaint callback source, and destroy it in
weston_output_release(), ensuring we don't get a stale call to
start_repaint_loop later.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The functions called here, particularly
weston_output_transform_scale_init(), rely on current mode being set.
The current mode must also be found in the mode list, though we don't
explicitly check it here.
current_mode not being set is a programmer error. It could be a backend
bug, but it could also be a libweston user bug not calling a set size
function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Output make and model are not allowed to be NULL in the protocol, so
ensure they are not forgotten when enabling an output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
All frontends have been converted to the new head-based output
management API, which means that
weston_compositor_create_output_with_head() is calling
weston_output_attach_head(). We will never hit the implicit attach
anymore.
Therefore we can now require that an output has at least one head when
calling weston_output_enable(). An output without heads is useless.
The auto-add code is removed as dead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The signal has been replaced with the heads_changed hook and is no
longer useful.
weston_pending_output_coldplug() is renamed to
weston_compositor_flush_heads_changed() for two reasons: it better
describes what it does now, and it serves as an obvious flag that
libweston ABI has been broken.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Rename the function pointer to create_head() because that is what it
does on backends that are converted to the head-based API. Update the
documentation to match.
Surprisingly this is not an ABI break, as the function behaviour and
signature remain intact. Hence API_NAME is not bumped.
This is only an API break, and main.c is fixed accordingly.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the DRM frontend to use the simple head-based output
configurator, maintaining the exact same features and semantics as
before.
This is an intermediate step. It is unoptimal to create a weston_output
just to turn it off, but the libweston implementation and the DRM
backend require it for now. In the future, the DRM frontend will get its
own configurator that does not create useless weston_outputs and
supports clone mode by attaching multiple heads to the same
weston_output. Clone mode is not yet supported by libweston/DRM.
Until we remove the need to create a weston_output just to turn it
"off", that is, disable it, we will hit simple_head_enable() for heads
we have already disabled. As long as the DRM-backend conversion to the
head-based API is not complete, attempting to create an output for a
head again would lead to a crash. This problem does not exist right now,
but it will after the patch "compositor-drm: start migration to
head-based output API". Therefore, check if the head we are about to
process is already attached, and do nothing if so. DRM outputs set to
"off" are the only ones legitimately hitting this condition.
This is the last frontend migrated, wet_set_pending_output_handler() is
deleted as dead code.
v9:
- Add the workaround in simple_head_enable().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
v7 Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the RDP frontend to use the new head-based output configuration
API: listen for heads_changed, and process all heads.
v7:
- remove unnecessary 'goto out' in load_rdp_backend()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the fbdev frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
v7:
- remove unnecessary 'goto out' in load_fbdev_backend()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the Wayland frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the x11 frontend to use the new head-based output configuration
API: listen for heads_changed, and process all heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Migrate the headless frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
The simple_heads_changed() function is written to be able to cater for
all backends. The rest will be migrated individually.
The head destroy listeners are not exactly necessary, for headless
anyway, but this is an example excercising the API. Also
is_device_changed() check is mostly useful with DRM.
v8:
- replace weston_compositor_set_heads_changed_cb() with
weston_compositor_add_heads_changed_listener()
- fix comment on wet_head_tracker_create()
v3: Print "Detected a monitor change" only for enabled heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Move the call out of wet_configure_windowed_output_from_config() and
into its callers.
This allows to migrate each frontend one by one.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reacting to DRM hotplug events is racy. It is theoretically possible to
get hotplug events for a quick swap from one monitor to another and
process both only after the new monitor is connected. Hence it is
possible for display device information to change without going through
a disconnected state for the head.
To support such cases, add API to allow detecting it in the compositor.
v6:
- change str_null_neq() to str_null_eq()
- rename weston_head_condition_device_changed()
- move the condition from weston_head_set_device_changed() to the
callers
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Add support for subscribing to weston_head destruction.
The primary use case for heads being destroyed arbitrarily is the
DRM-backend with MST connectors, which may disappear on unplug. It is
not just the connector becoming disconnected, it is the connector
actually disappearing.
The compositor needs to know about disappearing heads so that it has a
chance to clean up "orphaned" outputs which do get disabled but still
need destroying at run time. Shutdown would destroy them as well.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Introduce the API for users (compositors) to create an output from a
head, attach and detach heads, and destroy outputs created this way.
This also adds the backend-facing API to libweston.
In the new API design, a backend creates heads, and the compositor
chooses one or more heads (clone mode) to be driven by an output.
In the future backends will be converted to not create outputs directly
but only in the new create_output hook.
The user subscribes to a heads_changed hook and arranges heads into
outputs from there.
Adding the API this way will allow frontends (main.c) and backends to be
converted one by one. This adds compatiblity paths in
weston_compositor_create_output_with_head() and weston_output_destroy()
so that frontends can be converted first to call these, and then
backends can be converted one by one to the new design. Afterwards, the
compatibility paths will be removed along with weston_output::head.
Currently heads can be added to a disabled output only. This is less
than ideal for clone mode hotplug and should be improved on later.
v4: Remove the wl_output global on head detach if output is enabled.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Add a hook for compositors to get a callback when heads are added or
their connection status changes, to which compositors likely want to
react to by enabling or disabling outputs (API for that to be added
later).
As many head changes as possible should be coalesced into a single
heads_changed call. Therefore the callback is made from an idle task.
This anticipates a future atomic output configuration API, where the
global output configuration is tested and set atomically instead of one
by one.
weston_pending_output_coldplug() needs to manually execute the
heads_changed call so that initial outputs are created before any
plugins get their start-up idle tasks ran. This is especially important
for ivi-shell which does not support output hotplug, and for tests to
guarantee the expected outputs.
v8:
- Change the callback function pointer into a wl_signal. The API is
changed and renamed.
v6:
- fix a typo
- add comment in weston_pending_output_coldplug()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
weston_compositor needs to maintain a list of all available heads, so
that a compositor can pick and choose which heads to take into or out of
use at arbitrary times. The heads may be on or off, and connected or
disconnected.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Enabled is orthogonal from connected. A connected head could be
disabled, or a disconnected head could in the future be enabled.
Compositors quite likely want to check if a head is already enabled
before starting to take it into use.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Heads may be disconnected or connected and the compositor needs to be
able to know the state to know which heads to take into use.
Currently a single head is automatically created with an output, and
outputs are only ever created as connected and destroyed on
disconnection, so it suffices to set connected to true. In the future,
backends are expected to create heads for both connected and
disconnected connectors, so that a connector can be forced on without it
being actually connected.
v6:
- split weston_head_is_enabled() to a new patch
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Heads need to be named, so they can be referenced in logs and
configuration sources.
When clone mode is implemented, output and head names may differ.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The 'head' member of 'struct weston_output' is going to go unused and
then disappear, so stop using it and find a head from the proper list.
However, this leaves a problem in cms-colord: if you have multiple
monitors driver with the same CRTC, what do you say to the color
management system? The monitors could be different, but all the color
LUTs etc. are in the CRTC and are shared, as is the framebuffer.
Do the simple hack here and just use whatever head happens to be the
first in the list.
The warning is printed in get_output_id(), because if heads are added or
removed while the output is enabled, the id could change.
v6:
- add weston_output_get_first_head(), at first use
- add warning message for nr. heads > 1
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Duplicate these strings to decouple their lifetime from whatever the
backends used. This should prevent hard to catch use after frees and
such problems in the future.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Remove the wl_resource in the head's resource list when we are
removing the wl_output global. We sent global removal events to clients,
the resources should become dummies until clients reap them. Reset user
data so that clients triying to use dummy objects don't hit e.g. a freed
head pointer.
This fixes a theoretical issue: if an enabled output is disabled and
then gets enabled again, mode changes and wl_surface.enter/leave would
still attempt to use the dummy objects. If a client destroyed a dummy
object, we don't have the destructor to remove it from the resource
list, and libweston would hit freed memory.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The intention is that in the future backends will dynamically allocate
weston_heads based on the resources they have. The lifetime of a
weston_head will be independent of the lifetime of a weston_output it
may be attached to. Backends allocate objects derived from weston_head,
like they currently do for weston_output. Backend will choose when to
destroy a weston_head.
For clone mode, struct weston_output gains head_list member, which is
the list of attached heads that will all show the same framebuffer.
Since heads are growing out of weston_output, management functions are
added.
Detaching a head from an enabled output is allowed to accommodate
disappearing heads. Attaching a head to an enabled output is disallowed
because it may need hardware reconfiguration and testing, and so
requires a weston_output_enable() call.
As a temporary measure, we have one weston_head embedded in
weston_output, so that backends can be migrated individually to the new
allocation scheme.
v8:
- Do not send wp_presentation_feedback.sync_output events for multiple
wl_output globals in weston_presentation_feedback_present().
v6:
- adapt to upstream changes in weston_output_set_transform()
- use wl_list_for_each_safe in weston_output_release()
- removed weston_output_get_first_head() as it's not needed yet
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
v7 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Split out a new function. This is a pure refactoring, no change in
behaviour.
This helps a following patch that adds a loop over output->head_list.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The user data of a wl_resource representing a wl_output protocol object
used to be a pointer to weston_output. Now that weston_output is being
split, wl_output more accurately refers to weston_head which is a single
monitor.
Change the wl_output user data to point to weston_head.
weston_output_from_resource() is replaced with
weston_head_from_resource().
This change is not strictly necessary, but architecturally it is the
right thing to do. In the future there might appear the need to refer to
a specific head of a cloned pair, for instance.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
As a wl_output represents weston_head, use a weston_head pointer as the
wl_output global's user data.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
The wl_output protocol interface exposes things like monitor make,
model, sub-pixel layout and physical dimensions. Obviously wl_output is
meant to represent a monitor.
The abstraction of a monitor is weston_head. Therefore move the wl_output
global and the bound resources list into weston_head.
When clone mode gets implemented in the future, this means that monitors
driven by the same CRTC will still be represented as separate wl_output
globals. This allows to accurately represent the hardware.
Clone mode that used separate, not frame-locked, CRTCs to drive two
monitors as clones would necessarily also be exposed as separate
wl_output since they have different timings.
v6:
- adapt to upstream changes in weston_output_set_transform()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
In order to support clone modes, libweston needs the concept of a head
that is separate from weston_output. While weston_output manages buffers
and the repaint state machine, weston_head will represent a single
monitor. In the future it will be possible to have a single
weston_output drive one or more weston_heads for a clone mode that
shares the framebuffers between all cloned heads.
All the fields that are obviously properties of the monitor are moved
from weston_output into weston_head.
As moving the fields requires one to touch all the backends for all the
assingments, introduce setter functions for them while we are here. The
setters are identical to the old assignments, for now.
As a temporary measure, weston_output embeds a single head. Also the
ugly casts in weston_head_set_monitor_strings() will be removed by a
follow-up patch.
Libweston major version is bumped, because weston_output struct layout
is changed.
v7:
- Bump libweston major version.
v6:
- adapt to upstream changes in weston_output_set_transform()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
ef57a9b788 added support for window operations such as reporting the
title in escape mode. It implemented this by which-window-op case,
inside the existing which-escape-code case. Whilst it would break out of
the former window-op case, it never broke out of the latter escape-code
case. This would lead to window ops (such as reporting title) falling
through to restoring the saved cursor position.
This doesn't seem at all right, and also fixes a warning with GCC 8.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Pekka Paalanen
Derek Foreman
Daniel Stone