The time spent loading EGL and GLES libraries from disk can be a
considerable hit in some embedded use cases. If Weston is compiled
with EGL support, the binary will depend on those libraries, even if
a software renderer is in use.
This patch splits the GL renderer into a separate loadable module,
and moves the dependency on EGL and GLES to it. The backends still
need the EGL headers for the native types and EGLint. The function
load_module() is renamed to weston_load_module() and exported, so
that it can be used by the backends.
The gl renderer interface is changed so that there is only one symbol
that needs to be dlsym()'d. This symbol contains pointers to all the
functions and data necessary to interact with the renderer. As a side
effect, this change simplifies gl-renderer.h a great deal.
Previously if you add a second finger while moving a window with a
touch grab then the position will keep jumping between the position of
each finger as you move them around. This patch changes it so that it
keeps track of the first touch id that starts the grab and only
updates the grab position when that finger moves.
Adds a new binding type for touch events via the new function
weston_compositor_add_touch_binding. The binding can only be added for
a touch down with the first finger. The shell now uses this to install
a binding to activate the current surface.
The Wayland protocol permits a client to request the pointer, keyboard
and touch multiple times from the seat global. This is very useful in a
component like Clutter-GTK where we are combining two libraries that use
Wayland together.
This change migrates the weston input handling code to emit the
events for all the resources for the client by using the newly added
wl_resource_for_each macro to iterate over the resources that are
associated with the focused surface's client.
We maintain a list of focused resources on the pointer and keyboard
which is updated when the focus changes. However since we can have
resources created after the focus has already been set we must add the
resources to the right list and also update any state.
Additionally when setting the pointer focus it will now send the
keyboard modifiers regardless of whether the focused client has a
pointer resource. This is important because otherwise if the client
gets the pointer later than you getting the keyboard then the
modifiers might not be up-to-date.
Co-author: Neil Roberts <neil@linux.intel.com>
This patch implements the notification of clients during mode_switch.
As discussed on IRC, clients are notified of mode_switch only when the
"native" mode is changed and activated. That means that if the native
mode is changed and the compositor had activated a temporary mode for
a fullscreen surface, the clients will be notified only when the native
mode is restored.
The scaling factor is treated the same way as modes.
Hi Kristian,
Here's a new patch for ref counting weston_xkb_info, as suggested.
So a seat created with a NULL keymap will now point to the global xkb_info.
This makes the drag-and-drop code available to in-weston data sources,
similar to how we can set a selection data source internally. The
wl_data_device.start_drag entry point now calls this function after
validating protocol arguments.
config.h includes were missing in a few files, including input.c, the
lack of which caused the X11 backend to segfault instantly due to not
having an xkbcommon context.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This allows a surface to live on after its resource has been
destroyed. The ref-count can be increased in a resource destroy signal
listener, to keep the surface around for a destroy animation, for example.
This commit sets the version numbers for all added/created objects. The
wl_compositor.create_surface implementation was altered to create a surface
with the same version as the underlying wl_compositor. Since no other
"child interfaces" have version greater than 1, they were all hard-coded to
version 1.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
In embedded environments, devices that appear as evdev "keyboards" often
have no resemblence to PC-style keyboards. It is not uncommon for such
environments to have no concept of modifier keys and no need for XKB key
mapping; in these cases libxkbcommon initialization becomes unnecessary
startup overhead. On some SOC platforms, xkb keymap compilation can
account for as much as 1/3 - 1/2 of the total compositor startup time.
This patch introduces a 'use_xkbcommon' flag in the core compositor
structure that indicates whether the compositor is running in "raw
keyboard" mode. In raw keyboard mode, the compositor bypasses all
libxkbcommon initialization and processing. 'key' events containing the
integer keycode will continue to be delivered via the wl_keyboard
interface, but no 'keymap' event will be sent to clients. No modifier
handling or keysym mapping is performed in this mode.
Note that upstream sample apps (e.g., weston-terminal or the
desktop-shell client) will not recognize raw keycodes and will not react
to keypresses when the compositor is operating in raw keyboard mode.
This is expected behavior; key events are still being sent to the
client, the client (and/or its toolkit) just isn't written to handle
keypresses without doing xkb keysym mapping. Applications written
specifically for such embedded environments would be handling keypresses
via the raw keycode delivered as part of the 'key' event rather than
using xkb keysym mapping.
Whether to use xkbcommon is a global option that applies to all
compositor keyboard devices on the system; it is an all-or-nothing flag.
This patch simply adds conditional checks on whether xkbcommon is to be
used or not.
v3 don't send zero as the file descriptor - instead send the result of
opening /dev/null
v2 by Rob Bradford <rob@linux.intel.com>: the original version of the
patch used a "raw_keycodes" flag instead of the "use_xkbcommon" used in
this patch.
v1: Reviewed-by: Singh, Satyeshwar <satyeshwar.singh@intel.com>
v1: Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
This change tweaks weston_pointer_clamp to take into consideration if a
seat is constrained to a particular output by only considering the
pointer position valid if it is within the output we a constrained to.
This function is also used for the initial warping of the pointer when a
constraint is first established.
The other two changes are the application of the constraint when either
a new device added or a new output created and therefore outputs and
input devices can be brought up in either order.
v2: the code in create_output_for_connector has been spun off into a
new function setup_output_seat_constraint (Ander). The inappropriate
warping behaviour has been resolved by using weston_pointer_clamp
(Pekka).
This refactors the code out from clip_pointer_motion into a function of
its own which can then be used elsewhere to clamp the pointer
coordinates to the range of the outputs.
This change also makes the caller of clip_pointer_motion use this new
function.
This commit adds a weston_buffer structure to replace wl_buffer. This way
we can hold onto buffers by just their resource. In order to do this, the
every renderer.attach function has to fill in the weston_buffer.width and
weston_buffer.height fields.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Because of its links to selection.c and xwayland, a destroy_signal field
was also added to wl_data_source. Before selection.c and xwayland were
manually initializing the resource.destroy_signal field so that it could be
used without a valid resource.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
When the spring goes outside the envelope, we have a few options for
bringing it back: either just let it overshoot, bounce off the limit or
just clamp it. Instead of controlling that with #ifdef, let's make it
a part of the spring state.
xeyes works as expected now. subwindows are popped also as expected. This
patch should fix the following:
https://bugs.freedesktop.org/show_bug.cgi?id=59983
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
This is the first in what will be a series of weston patches to convert
instances of wl_resource to pointers so we can make wl_resource opaque.
This patch handles weston_surface and should be the most invasive of the
entire series. I am sending this one out ahead of the rest for review.
Specifically, my machine is not set up to build XWayland so I have no
ability to test it fully. Could someone please test with XWayland and let
me know if this causes problems?
Because a surface may be created from XWayland, the resource may not always
exist. Therefore, a destroy signal was added to weston_surface and
everything used to listen to surface->resource.destroy_signal now listens
to surface->destroy_signal.
It may happen that you e.g. fullscreen a 800x600 surface with
buffer_scale 1 (e.g. a 800x600 buffer) on an output that is
otherwise scale 2. In this case we want to temporarily set
the output scale to 1, as we're really scanning out of a
scale 1 buffer. This causes us to e.g. report the input
positions in the right place, etc.
When we restore the original mode we also restore the original
scale.
Note that the scale change is a purely compositor internal change,
to clients it still looks like the output is scale 2.
The current config parser, parses the ini file and pulls out the values
specified by the struct config_section passed to parse_config_file() and
then throw the rest away. This means that every place we want to get
info out of the ini file, we have to parse the whole thing again. It's not
a big overhead, but it's also not a convenient API.
This patch adds a parser that parses the ini file to a data structure and
puts that in weston_compositor->config along with API to query comfig
keys from the data structure. The old parser is still available, but
we'll transition to the new approach over the next few commits.
Both GL and pixman renderer (pixman probably only because GL did?)
return the screen capture image as y-flipped, therefore Weston y-flips
it again. However, the future rpi-renderer can produce only right-way-up
(non-flipped) screen captures, and does not need an y-flip.
Add a capability flag for y-flip, which the rpi-renderer will not set,
to get screen captures the right way up.
The wcap recording code needs yet another temporary buffer for the
non-flipped case, since the WCAP format is flipped, and the code
normally overwrites the input image as it compresses it. This becomes
difficult, if the compressor is supposed to flip while processing.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The upcoming rpi-renderer cannot handle arbitrary rotations. Introduce
Weston capability bits, and add a bit for arbitrary rotation. GL and
Pixman renderers support it.
Shell or any other module must not produce surface transformations with
rotation, if the capability bit is not set. Do not register the surface
rotation binding in desktop shell, if arbitary rotation is not
supported.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If you specify e.g. scale=2 in weston.ini an output section for the
X11 backend we automatically upscale all normal surfaces by this
amount. Additionally we respect a buffer_scale set on the buffer to
mean that the buffer is already in a scaled form.
This works with both the gl and the pixman renderer. The non-X
backends compile and work, but don't support changing the output
scale (they do downscale as needed due to buffer_scale though).
This also sends the new "scale" and "done" events on wl_output,
making clients aware of the scale.
This set of changes adds support for searching for a given config file
in the directories listed in $XDG_CONFIG_DIRS if it wasn't found in
$XDG_CONFIG_HOME or ~/.config. This allows packages to install custom
config files in /etc/xdg/weston, for example, thus allowing them to
avoid dealing with home directories.
To avoid a TOCTOU race the config file is actually open()ed during the
search. Its file descriptor is returned and stored in the compositor
for later use when performing subsequent config file parses.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
The subsurface-server-protocol.h header should not be included
by any headers that are part of the SDK since it is not exported.
Otherwise, SDK consumers will break during compilation.
Move this include from compositor.h to compositor.c.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=64537
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
The shell needs to redirect some actions to the parent surface, when
they originally target a sub-surface. This patch implements the
following:
- Move, resize, and rotate bindings always target the parent surface.
- Opacity (full-surface alpha) binding targets the parent surface. This
is broken, because it should change the opacity of the whole compound
window, which is difficult to implement in the renderer.
- click_to_activate_binding() needs to check the shell surface type from
the main surface, because sub-surface would produce SHELL_SURFACE_NONE
and prevent activation.
- Also activate() needs to check the type from the main surface, and
restack the main surface. Keyboard focus is assigned to the original
(sub-)surface.
- focus_state_surface_destroy() needs to handle sub-surfaces: only the
main surface will be in a layer list. If the destroyed surface is
indeed a sub-surface, activate the main surface next. This way a
client that destroys a focused sub-surface still retains focus in the
same window.
- The workspace_manager.move_surface request can accept also
sub-surfaces, and it will move the corresponding main surface.
Changes in v2:
- do not special-case keyboard focus for sub-surfaces
- fix surface type checks for sub-surfaces in shell, fix restacking of
sub-surfaces in shell, fix focus_state_surface_destroy()
Changes in v3:
- Renamed weston_surface_get_parent() to
weston_surface_get_main_surface() to be more explicit that this is
about sub-surfaces
- Fixed move_surface_to_workspace() to handle keyboard focus on a
sub-surface.
- Used a temporary variable in several places to clarify code, instead
of reassigning a variable.
- Fixed workspace_manager_move_surface() to deal with sub-surfaces.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Jonas Ådahl
Ander Conselvan de Oliveira
Neil Roberts
Hardening
Kristian Høgsberg
Giulio Camuffo
Stanislav Vorobiov
Andrew Wedgbury
Pier Luigi Fiorini
Daniel Stone
Peter Hutterer
Michael Fu
Jason Ekstrand
Matt Roper
Rob Bradford
Tiago Vignatti
Alexander Larsson
Pekka Paalanen
Ossama Othman
U. Artie Eoff