A weston_output available to the compositor should always be either in
the list of pending outputs or the list of enabled outputs. Let
weston_compositor_add_output() and weston_compositor_remove_output()
handle the moves between the lists.
This way weston_output_enable() does not need to remove and
oops-it-failed-add-it-back. weston_output_disable() does not need to
manually re-add the output back to the pending list.
To make everything nicely symmetric and fix any unbalancing caused by
this:
- weston_output_destroy() explicitly wl_list_remove()s
- weston_compositor_add_pending_output() first removes then inserts, as
we have the assumption that the link is always valid, even if empty.
Update the documentations, too.
v2:
- talk about "list of enabled outputs"
- keep wl_list_remove in weston_compositor_remove_output in its old
place
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Trying to make it more readable. Things that happen in the same step are
kept in the same paragraph.
v2: talk about "list of enabled outputs"
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Dead code as orientation cannot be changed anymore, see patches:
ivi-shell: remove layer_set_orientation API
ivi-shell: remove surface_set_orientation API
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: added commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This API is used to rotate the contents of
application's buffer, which are in the render
order list of the layer. But this API is not
needed because an application can rotate
its buffers with set_buffer_transform request
of wl_surface interface
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This API is used to rotate the contents of
application's buffer. But it is not needed
because an application can rotate its buffers
with set_buffer_transform request of
wl_surface interface.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It is analagous to layer_remove_surface API.
The API removes a layer from the render order
of the screen.
v3:
add the new vfunc at the end of
the ivi_layout_interface struct.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Eugen Friedrich <friedrix@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When we receive configure_notify we should update the surface's
position by calling xwayland_api->set_xwayland(). Otherwise some surfaces
like dnd surfaces from xwayland views are "stuck" at one place. When
setting XWAYLAND state though we should always call view_set_position(),
not just the first time we set this state.
Signed-off-by: Ilia Bozhinov <ammen99@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Now we keep track of serial->state association and we discard the states
that the client ignored.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We were checking against the pending size, which lead some clients
(simple-egl) to crash because they sent a buffer before acknowledging
the latest configure event.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We need to make sure the client bound dmabuf with a high enough
version to receive modifier events before sending them or the
client will crash.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We shouldn't free &modifier_invalid because it wasn't allocated
with malloc()
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Some log messages weren't terminated with a newline.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
It looks like there are some code paths where this has been forgotten, so
it likely doesn't work as is. It's probable that nobody has actually
used this in a very long time, so it's not worth the maintenance burden
of keeping xkbcommon vs raw keyboard code anymore.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When switching a state twice in a row, we were overwriting the old value
without setting it back, sending a wrong state to the client.
Now we update our requested state, then check if we need to schedule a
configure event, if we have one scheduled already or even if we can
cancel it.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
mesa's freedreno driver supports importing dmabufs with format
DRM_FORMAT_NV12 and DRM_FORMAT_MOD_SAMSUNG_64_32_TILE modifier.
demonstrate weston modifier advertising and import path using this
combination when run with --import-format=NV12.
v2:
- hard code format if platform doesn't implement
EGL_EXT_image_dma_buf_import_modifiers and cannot advertise
format/modifier support.
- squash using valid frame data to fill dmabuf planes
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
abstract drm specific bits to struct drm_device and support running on
freedreno. introduce 'modifier' event.
v2: rebase to master, deprecate 'format' event.
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
this will allow adding other drm backends later.
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
EGL_EXT_image_dma_buf_import_modifiers supports importing upto four dmabuf
planes into an EGLImage.
v2: correct PLANE3_PITCH token (Daniel Stone)
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
pass over the modifier attributes to EGL.
v2: ensure same modifier is passed for all planes (Daniel Stone)
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
implement 'modifier' event to communicate available formats and modifiers
to the client and support zwp_linux_dmabuf_v1 interface version 3.
v2: handle zero modifiers case, deprecate 'format' event.
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
EGL_EXT_image_dma_buf_import_modifiers allows querying the formats
and modifiers supported by the platform. expose these to the compositor.
v2:
- change calloc args (Daniel Stone)
- check for modifier support before querying formats (Daniel Stone)
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
request immediate dmabuf import when run with "immed" arg.
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
handle create_immed() dmabuf import requests and support
zwp_linux_dmabuf_v1_interface version 2.
v2: terminate client with INVALID_WL_BUFFER when reason
for create_immed failure is unknown.
[daniels: Bump wayland-protocols dependency.]
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
I ran Weston on a Nexus 4 mobile phone, with a native GNU/Linux userland,
and the latest Android kernel for that device from LineageOS [1].
calculate_refresh_rate() returned 1 (mHz), which gets rounded to 0 Hz later
and results in nothing being drawn to the screen.
This patch makes sure, that there is at least a refresh rate of 1 Hz, because
it returns the default refresh rate of 60 Hz otherwise.
[1]: https://github.com/LineageOS/lge-kernel-mako
Signed-off-by: Oliver Smith <ollieparanoid@bitmessage.ch>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
A little earlier today I ended up spending a lot of time trying to
figure out why weston wasn't managing to launch over SSH and telling me
that I did not have a --tty option specified, despite me passing the
option strings ["--tty", "3"]. Turns out weston just doesn't support
that.
So, add support for this kind of format in addition to "--foo=bar" to
save others from making the same mistake I did.
Changes since v1:
- Add comment about unreachable boolean check in long_option_with_arg()
- Convert boolean check in long_option_with_arg() to assert
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
wl_surface_damage_buffer landed ages ago, but in order for GL to
use it the client must bind a wl_compositor version >= 4 (the
version where damage_buffer was introduced).
This patch updates the bind version and allows
eglSwapBuffersWithDamage to actually use the provided damage
rectangles instead of performing full surface damage.
Reviewed-by: Daniel Stone <daniels@collabora.com>
wl_surface_damage_buffer landed ages ago, but in order for GL to
use it the client must bind a wl_compositor version >= 4 (the
version where damage_buffer was introduced).
This patch updates the bind version and allows
eglSwapBuffersWithDamage to actually use the provided damage
rectangles instead of performing full surface damage.
This log is much longer than the patch.
Reviewed-by: Daniel Stone <daniels@collabora.com>
xwm would not let X clients change the focus behind the compositor's
back, reverting focus where it's supposed to be when this occurs.
However, X11 grab also issue focus in events, on which some clients
rely and reverting focus in this case braks the client logic (e.g.
combobox menu in gtk+ using the X11 backend).
Check if the focus event is actually coming from a grab or ungrab and
do not revert focus in this case, to avoid breaking clients logic.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>
At the bottom of weston_output_finish_frame(), code exists to account
for flips which have missed the repaint window, by shifting them to lock
on to the next repaint window rather than repainting immediately.
This code only accounted for flips which missed their target by one
repaint window. If they miss by multiples of the repaint window, adjust
them until the next repaint timestamp is in the future. This will only
happen in fairly extreme situations, such as Weston being scheduled out
for a punitively long period of time. Nevertheless, try to help recovery
by still aiming for more predictable timings.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Instead of creating a single global fade surface across all outputs,
create a separate surface for each output. This will permit
e.g. individual fades for each output (or blocking the fade-outs if
inhibiting idling as will come in a later patch.)
This also fixes a potential issue if on multihead layout spanning a
desktop wider than 8096 (or higher than 8096), the fade animation may
not completely cover all surfaces.
This assumes the output geometry doesn't change to become larger during
the course of the fade animation.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
commit a7cba1d4cd changed the way
the cursor plane is setup. Previously it was pre-emptively set
disabled for the next frame, and that would be changed at next
frame time if the cursor plane was to be used. It was changed
to be disabled at plane assignment time.
We disable the use of planes entirely by setting disable_planes to
a non-zero value, which bypasses all calls to assign_planes - so
if the plane was set-up in the previous frame it will retain its
state post-disable.
This leads to desktop zoom leaving the cursor plane in place when
it sets disable_planes.
This patch clears any stale cursor plane state from the redraw
handler if disable_planes is set so drm_output_set_cursor()
will do the right thing.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reported-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Fix up the window position whenever the geometry info changes.
If the window geometry changes, we want to keep the input-responding
content anchored to top-left. It is done by manipulating the dx,dy
arguments originating from a wl_surface.attach request.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
This patch uses the new feature proposed for Xwayland in the patch
series https://patchwork.freedesktop.org/series/16610/ .
When the frame window is created, immediately forbid Xwayland commits on
it. This prevents commits before the decorations have been drawn and the
initial pending state has been set. Commits are enabled right after
drawing and setting.
This ensures that the decorations are fully drawn when a window is
mapped. This also solves the initial commit/pending race, but the race
is on again after mapping.
If Xwayland does not implement the needed support, we are just setting a
window property with no effect.
This patch is the final piece for solving T7622, excluding the
_NET_WM_SYNC_REQUEST handling.
Task: https://phabricator.freedesktop.org/T7622
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Normal windows enter the MapRequest handler, which schedules drawing the
decorations. Then Xwayland realizes the window, which ends with a call
to xserver_map_shell_surface(). The decorations are already drawn, no
need to draw them a second time. However, MapRequest handler could not
set the pending state because the weston_surface did not exist at the
time, because it gets created only when Xwayland realizes the window,
which happens after XWM has forwarded the MapWindow in MapRequest
handler. Therefore set the pending state explicitly at the end.
Scheduling had it done much later anyway.
Now that the pending state is set much earlier, it seems to be more
likely that it gets set before Xwayland's first commit is handled. This
means that -geometry command line option of X11 apps already takes the
geometry (decorations) into account. I do not think it is reliable yet,
though.
There is still the race between Xwayland committing and XWM setting the
pending state assuming the very next commit latches it in appropriately.
The race exists not because of Wayland, but because WL_SURFACE_ID comes
via X11, and could be processed after wl_compositor.create_surface and
wl_surface.commit. That commit/pending race is solved by a following patch.
For override-redirect windows weston_wm_window_schedule_repaint()
reduced into a call to weston_wm_window_set_pending_state_OR(), so we
can just call that directly. It should not matter that the call is moved
to the end of the function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Since building libweston includes EGL/egl.h from pixel-formats.c,
EGL_CFLAGS must be added to libweston_CFLAGS, as on some platforms that
contains -DMESA_EGL_NO_X11_HEADERS, and fails to compile without it:
CC libweston/libweston_3_la-pixel-formats.lo
In file included from [...]/usr/include/EGL/egl.h:39:0,
from libweston/pixel-formats.c:39:
[...]/usr/include/EGL/eglplatform.h:119:22:
fatal error: X11/Xlib.h: No such file or directory
Fixes: 903721a621 ("libweston: Add pixel-format helpers")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reorder some paragraphs to be more logically ordered. Rewrite the
description of the backend-specific disable function to explain the
semantics instead of the mechanics. Remove the paragraph about
pending_output_list as unnecessary details.
Add a big fat comment on why we call output->disable() always instead of
only for actually enabled outputs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
We make the differentiation where planes are an abstract framebuffer
with a position within a CRTC/output, and sprites are special cases of
planes that are neither the primary (base/framebuffer) nor cursor plane.
drm_sprite, OTOH, contains nothing that's actually specific to sprites,
and we end up duplicating a lot of code to deal with them, especially
when we come to use an entirely plane-based interface with atomic
modesetting.
Rename drm_sprite to drm_plane, to reflect that it's actually generic.
No functional changes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
[Pekka: dropped the removal of an unrelated comment]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
page_flip_pending is only be set when do a pageflip to a newly-rendered
buffer; if the flag is not set, we have landed in the start_repaint_loop
path where the vblank query fails, and thus we must pageflip to the same
buffer.
This test was not sufficient for what it was supposed to guard:
releasing framebuffers back. When using client-supplied framebuffers, it
is possible to reuse the same buffer multiple times, and we would send a
framebuffer-release event too early.
However, since we have a properly reference-counted drm_fb now, we can
just drop this test, and rely on the reference counting to prevent
too-early release of client framebuffers.
page_flip_pending now becomes exactly what the name suggests: a flag
which indicates whether or not we are expecting a pageflip event. Add
asserts here to verify that we never receive a pageflip event we weren't
expecting.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
vblank_pending is currently a bool, which is reset on every vblank
requests (i.e. sprite pageflip). This can occur more than once per
frame, so turn it into a callback, so we only fire frame-done when we've
collected all the events.
This fixes unexpected behaviour when multiple views per output have been
promoted to DRM planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Previously, framebuffers were stored as fb_current and fb_pending.
In this scheme, current was the last buffer that the kernel/hardware had
acknowledged displaying: a framebuffer would be created, set as
fb_pending, and Weston would request the kernel display it. When the
kernel signals that the request was completed and the hardware had made
the buffer current (i.e. page_flip_handler / vblank_handler), we would
unreference the old fb_current, and promote fb_pending to fb_current.
In other words, the view is 'which buffer has turned to light?'.
This patch changes them to a tristate of fb_last, fb_current and
fb_pending, based around the kernel's view of the current state.
fb_pending is used purely as a staging area for request construction;
when the kernel acknowledges a request (e.g. drmModePageFlip returns 0),
the previous buffer is moved to fb_last, and this new buffer to
fb_current. When the kernel signals that the request has completed and
the hardware has made the buffer current, we simply unreference and
clear fb_last, without touching fb_current/fb_pending.
The view here is now 'which state is current in the kernel?'.
As all state changes are incremental on the last state submitted to the
kernel, even if the hardware has not yet been able to make it current,
this simplifies state tracking: all state submissions will always be
relative to fb_current, rather than the previous
(fb_pending) ? fb_pending : fb_current.
The use of fb_pending is strictly bounded between a repaint cycle
(including a grouped set of repaints) beginning, and those repaints
being flushed to the kernel.
fb_current will always be valid between an output's first repaint
flush, and when a disable/destroy request has been processed. For a
plane, it will be valid when a repaint cycle enabling that plane has
been flushed, and when a repaint cycle disabling that plane has been
flushed.
fb_last is only present when a repaint request for the output/plane has
been submitted, but not yet completed by the hardware.
This is the same set of constructs which will be used for storing
plane/output state objects in future patches.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We implement v2 so use that instead of the DRM_EVENT_CONTEXT_VERSION
macro.
The latter defines the version of the drmEventContext struct declared in
the header [used in the current build] and can be 2, 3 or even 1000.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Instead of setting state members directly in the drm_output_render
functions (to paint using Pixman or GL), just return a drm_fb, and let
the core function place it in state.
This brings damage handling in line with repaint state, so we do not
clear damage if repaint fails.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Call drm_output_render unconditionally, doing an early exit if we're
already rendering a client buffer on the primary plane.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Pekka Paalanen
Michael Teyfel
Ucan, Emre (ADITG/SW1)
Ilia Bozhinov
Quentin Glidic
Bryce Harrington
Derek Foreman
Varad Gautam
Varad Gautam
Oliver Smith
Lyude Paul
Olivier Fourdan
Daniel Stone
Philipp Zabel
Emil Velikov