This should be identical to the pointer in shset->seat.
A later patch prevents direct access to seat->pointer, using the
known valid pointer in the grab will be nicer than using the
getter functions that patch introduces.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't actually need the seat and we have to validate that the seat
has a pointer before making the call, so it's safer just to pass
the validated pointer.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't actually need the seat and we have to validate that the seat
has a pointer before making the call, so it's safer just to pass
the validated pointer.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't actually need the seat and we have to validate that the seat
has a pointer before making the call, so it's safer just to pass
the validated pointer.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It never actually needs the seat, and we always verify the touch pointer
before calling it, so let's just pass a touch pointer instead of having
an assumption that the seat's touch pointer has been verified.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Normally we need to check if a seat's [device_type]_count is > 0 before
we can use the associated pointer. However, in a binding you're
guaranteed that the seat has a device of that type. If we pass in
that type instead of the seat, it's obvious we don't have to test it.
The bindings can still get the seat pointer via whatever->seat if they
need it.
This is preparation for a follow up patch that prevents direct access
to seat->device_type pointers, and this will save us a few tests at
that point.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
We shouldn't actually use the keyboard pointer unless we check that
a keyboard is present.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Make it a bool in both surface_move() and struct weston_move_grab
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Fix desktop-shell's activate() method to only restore the output
mode on the single output on which a shell surface gets activated.
This way toplevel fullscreen surfaces can mode-switch their output
via method WL_SHELL_SURFACE_FULLSCREEN_METHOD_DRIVER and that
temporary mode properly persists until the surface loses its
fullscreen status, but effects like window switching and exposay
still work in the expected way.
v2: Split into a separate patch from original patch
"Allow restore_output_mode() to work properly.",
as suggested by Derek Foreman.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Desktop shell demoted all fullscreen shell surfaces on all active
outputs of a multi-display setup whenever any shell surface was
activated anywhere. This made it impossible to have multiple
fullscreen windows on separate outputs active at the same
time, as creating or activating any shell surface would disable
fullscreen status for all existing fullscreen surfaces.
Make lower_fullscreen_layer() more selective, so on request it
only demotes fullscreen surfaces on a specified weston_output.
The activate() method for a specific surface will now only request
demotion of fullscreen surfaces on the target output of the activated
surface, but leave fullscreen surfaces on unrelated outputs alone.
Desktop wide acting functions like the window switcher or exposay
will still demote all fullscreen surfaces on all outputs to
implement their effect as before.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
We used to rely on the order in which the
weston_compositor::destroy_signal callbacks happened, to not access
freed memory. Don't know when, but this broke at least with ivi-shell,
which caused crashes in random places on compositor shutdown.
Valgrind found the following:
Invalid write of size 8
at 0xC2EDC69: unbind_input_panel (input-panel-ivi.c:340)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea360 is 208 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0D7: wl_list_remove (wayland-util.c:57)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea370 is 224 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0E7: wl_list_remove (wayland-util.c:58)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea368 is 216 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Looking at the first of these, unbind_input_panel() gets called when the
text-backend destroys its helper client which has bound to input_panel
interface. This happens after the shell's destroy_signal callback has
been called, so the shell has already been freed.
The other two errors come from
wl_list_remove(&input_panel_surface->link);
which has gone stale when the shell was destroyed
(shell->input_panel.surfaces list).
Rather than creating even more destroy listeners and hooking them up in
spaghetti, modify text-backend to not hook up to the compositor destroy
signal. Instead, make it the text_backend_init() callers' responsibility
to also call text_backend_destroy() appropriately, before the shell goes
away.
This fixed all the above Valgrind errors, and avoid a crash with
ivi-shell when exiting Weston.
Also using desktop-shell exhibited similar Valgrind errors which are
fixed by this patch, but those didn't happen to cause any crashes AFAIK.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
This is a follow-up for the patch that removed weston-screensaver. The
aim is to clean up shell.c a little by removing non-essential
components. Vanilla Weston desktop is only a demo, external projects are
encouraged to create user-friendly desktop environments.
The support for launching a screensaver client and the protocol bindings
are removed. With them, all related configuration options are removed,
and the manuals are updated accordingly.
The screensaver protocol definition is left in desktop-shell.xml for
posterity.
This does not affect Weston's or desktop-shells ability to put screens
to sleep after inactivity. The inactivity timer continues to operate as
before. Also screen locking is unaffected.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Removed duplicate definitions of the container_of() macro and
refactored sources to use the single implementation.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Removed multiple definitions of the MIN() macro from existing
locations and unified with a single definition. Updated sources
to use the shared version.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Using the parent '../' path component in #include statements makes
the codebase more rigid and is redundant due to proper -I use.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Whether a input method is used should be the responsibility
of the shell because some shells may not want to implement
an input method at all
Signed-off-by: Murray Calavera <murray.calavera@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Do not use a black blanket surface when the startup animation is
specified to be "none". This is the final fix needed to make the
screenshot test deterministic and independent of weston-desktop-shell.
Previously, the black surface would cover all outputs until
weston-desktop-shell signalled ready. Then, depending on the set
animation, either the black surface was immediately removed (none) or a
fade-in started (fade).
Now, when there is no black surface at all for "none", the compositor
will show garbage until weston-desktop-shell gets everything up. This
may be undesireable but works for tests. To have the old "none"
behaviour back, I would propose to add a new startup-animation value
"black" for it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
It's possible for more than one animation to be taking place on a view at
the same time. If one of those animations is the shell's fade out for
dying surfaces, its completion handler will trigger the surface destroy
signal, causing other animations on the animation list to remove themselves.
Since this removal occurs during the linked list walk, the compositor may
crash.
We move the actual surface destruction into an idle handler to avoid this.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If the compositor has never seen a mouse, exposay will crash because
the seat->pointer pointer is NULL.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Weston has sent the first 'resizing' configure event with width=height=0.
But resizing to that size doesn't make sense.
Instead, we now send the current width and height of the surface at the beginning
of resizing.
Signed-off-by: Ryo Munakata <ryomnktml@gmail.com>
They are errors that may be as a result of calling get_xdg_popup on an
xdg_shell, not a result of calling a request on xdg_popup.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Require all child objects to be destroyed before the parent. In other
words, all popups and surfaces created by one xdg_shell instance needs
to be destroyed before the xdg_shell object, otherwise a protocol error
is raised.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The other set_focus() functions take the relevant type instead of a seat
already, so this is consistent.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Currently, the shell crashes if the parent is not a shell surface. Instead,
send an error to the client.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
All the surfaces from all the X clients share the same wl_client so
wl_client_get_credentials can't be used to get the pid of the X
clients.
The shell may need to know the pid to be able to associate a surface
with e.g. a DBus service.
[Pekka: fixed trivial merge conflicts.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The "set_minimized(surface, 0)" function call was never
used anywhere, and not really respecting naming
conventions.
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Now clamping width and height to a minimum of 1, 1 when drag resizing.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The code for the key binding that triggers debug key bindings, that is,
the code that makes mod+SHIFT+SPACE work, used to live in shell.c. I
want to make the debug key bindings available in ivi-shell too, so this
code should be shared. Move it to core.
The code was originally introduced in
commit c509d2b152
so update the copyright in binding.c to reflect that.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Send an invalid_parent error when the client tries to create a popup
with a paren that is neither a xdg_surface nor a xdg_popup.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Either in destroy or get_xdg_popup.
[jadahl: Verify that the new popup is the top most when mapping instead
of creating. Some renaming.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There haven't been any ideas for flags, so we don't need a useless,
unused parameter hanging around. Any future ideas should be done with a
new request entirely.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It doesn't serve any purpose, as it's a serial that the client gave to
the server when starting the popup, which the client already has.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Can just use wl_list_for_each_safe instead of dealing with pointers
ourself.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If a client calls xdg_shell.get_xdg_surface on a surface that is already
an xdg_surface would, prior to this patch, succeed, but cause weston to
crash later when trying to configure. This patch instead sends a role
error to the client complaining that it already is an xdg_surface.
Note that .._set_role() only fails when changing roles, not when setting
the same role twice.
The same is done for xdg_popup.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This patch adds the maximize button to the window frame for the windows
which set the MWM_DECOR_MAXIMIZE hint, and it wires it with the shell
via a new method in weston_shell_interface.
Additionally, it also listens for the wm hints coming from the client,
but it doesn't support maximizing a window only vertically or horizontally.
The window will be maximized only when both directions are maximized.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Remove a few instances of casting weston_seat to weston_seat.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
The zoom effect zooms at the seat's current pointer location. When no
pointer is present the zoom key bindings cause a crash.
Instead, check for the absence of a pointer and log a warning.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Logging is activated and deactivated with the debug key binding 't'.
When activated, it creates a new log file, where it records the events.
The log file contains events and detailed object information entries in
JSON format, and is meant to be parsed in sequence from beginning to the
end.
The emitted events are mostly related to the output repaint cycle, like
when repaint begins, is submitted to GPU, and when it completes on a
vblank. This is recorded per-output. Also some per-surface events are
recorded, including when surface damage is flushed.
To reduce the log size, events refer to objects like outputs and
surfaces by id numbers. Detailed object information is emitted only as
needed: on the first object occurrence, and afterwards only if
weston_timeline_object::force_refresh asks for it.
The detailed information for surfaces includes the string returned by
weston_surface::get_label. Therefore it is important to set
weston_timeline_object::force_refresh = 1 whenever the string would
change, so that the new details get recorded.
A rudimentary parser and SVG generator can be found at:
https://github.com/ppaalanen/wesgr
The timeline logs can answer questions including:
- How does the compositor repaint cycle work timing-wise?
- When was the vblank deadline missed?
- What is the latency from surface commit to showing the new content on
screen?
- How long does it take to process the scenegraph?
v2: weston_surface::get_description renamed to get_label.
v3: reafctor a bit into fprint_quoted_string().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When printing out logs from Weston's actions, mainly for debugging, it
can be very difficult to identify the different surfaces. Inspecting
the configure function pointer is not useful, as the configure functions
may live in modules.
Add vfunc get_label to weston_surface, which will produce a short,
human-readable description of the surface, which allows identifying it
better, rather than just looking at the surface size, for instance.
Set the label function from most parts of Weston, to identify cursors and
drag icons, and panels, backgrounds, screensavers and lock surfaces, and
the desktop shell's application surfaces.
v2: renamed 'description' to 'label', so we get
weston_surface_set_label_func().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If a keyboard exists but it has no current focus, yet something asks the
input-panel to come up, we would crash here. Check that there is a focus
before attempting to use it.
Maybe there should not even exist a case where input-panel tries to come
up without a keyboard focus, but I am not sure there is no race where it
could happen.
In any case, this fix was brought up by the ivi-shell work, where I
suppose you can somehow hit it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Tanibata, Nobuhiko <ntanibata@jp.adit-jv.com>
set_fullscreen has been sending configure before changing the state
and xwayland windows added border to the fullscreen size.
This fixes the bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83502
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Ryo Munakata <ryomnktml@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This breaks weston_output_mode_switch() into 3 functions:
weston_output_mode_set_native()
weston_output_mode_switch_to_temporary()
weston_output_mode_switch_to_native()
Differences from previous behaviour:
SET_NATIVE didn't set current_scale (now it does)
SET_TEMPORARY could set mode and scale independently - now it can't.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Derek Foreman
Mario Kleiner
Pekka Paalanen
Jon Cruz
Bryce Harrington
Murray Calavera
Michael Vetter
Ryo Munakata
Jonas Ådahl
Dima Ryazanov
Giulio Camuffo
Manuel Bachmann
Jasper St. Pierre
Pekka Paalanen
Marek Chalupa