We never init this, so we need to copy over the position matrix and then
overwrite the translation entries to make sure we have a valid matrix.
Thanks to Pekka for spotting this (twice).
This way the shell can know when a surface has been unmapped by
checking the value returned by weston_surface_is_mapped(surface).
The configure handlers have now width and height parameters, so
they do not need anymore to check manually the buffer size.
If a surface's buffer is NULL the width and height passed to the
configure are both 0.
Configure is now only called after an attach. The variable
weston_surface.pending.newly_attached is set to 1 on attach, and
after the configure call is reset to 0.
Previously, when coming back from idle the compositor would try to
track if the unlock signal needed to be sent, and the shell would
change the compositor state in order to track when to display or
hide the screensaver.
This patch finishes moving this out of the compositor. With this, the
compositor state should be changed only using the exported functions
weston_compositor_wake() and weston_compositor_sleep(). The unlock
signal will be sent if the compositor wasn't in the ACTIVE state
previously. The lock signal is sent when the compositor becomes idle.
The calls to weston_compositor_wake() in the shell where there to allow
it to trigger the fade in only after the lock surface was configured.
Now the shell has full control of the fade and does not needed to
change the compositor state to do that, so those calls were replaced
with shell_fade() calls.
Previously, it was impossible to override the fade in/out behavior of
Weston using a different shell, since this was implemented in core
Weston. This also led to complicated interaction between the shell and
the core when displaying lock surfaces and screensavers.
This patch starts to solve this issue by moving the fade animation out
of the core. On compositor.c, besides deleting the fade code, the idle
handler had to be changed to emit the lock signal, since it was called
from the fade_frame() function before. This causes a slight change of
behavior, since before the fade would happen with the compositor being
active, while now it is already in the idle state. That leads to the
dpms state being set when cancelling the fade with mouse movement, and
in turn, to a slight freeze with drm compositor. This problem will be
fixed in a follow up patch.
On the shell side, the fade was re-implemented in a slightly different
manner. Instead of using a custom frame function, the fade animation
from animation.c is used. The interface for starting the fade was also
changed to take the value of an enum instead of a float alpha value,
in order to improve readability.
Because seat_get_keyboard is called after initial
weston_surface_activate, wl_data_device_set_keyboard_focus
fails to send data offer for newly connected client due to
wl_seat.focus_resource being NULL.
This patch calls wl_data_device_set_keyboard_focus
in seat_get_keyboard, so it can send data offer for
newly created client (when wl_keyboard.resource_list
and wl_seat.focus_resource are properly set up).
https://bugs.freedesktop.org/show_bug.cgi?id=60617
This patch installs the three header files that define the compositor
plugin interface as well as a pkg-config file. This allows
building weston plugins outside the weston tree. We currently don't make
any guarantees about the plugin API/ABI except that within a stable
branch we won't break it.
libunwind has a dwarf parser and automatically queries the dlinfo
for location of dlopened modules. The resulting backtrace is much
better and includes stack frames in dynamically loaded modules.
krh: Originally submitted for Xorg, adapted for weston:
http://lists.x.org/archives/xorg-devel/2013-February/035493.html
Note this require libunwind at least 1.1 to get the pkg-config files.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
When fading in, if a repaint was triggered after a call to
weston_compositor_fade() but before the first call to fade_frame(),
the fade surface wouldn't be drawn because its alpha channel wasn't
initialized properly.
Introduce several matrix transform types and track type for matrix.
Could be usefull for activating some fastpath that depends on some
transform type.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
When an output suffers a mode switch, it is possible that a pointer
was inside the old output area but falls outside of it with the new
size. In that case, move the cursor to the output's bottom-right
corner. Otherwise, there's a crash in clip_pointer_motion().
After a mode switch, the output region and transformation matrix need
to be updated. The call to weston_output_move() would do the former but
not the latter, but calling that when the output remains in the same
coordinate doesn't make much sense. Instead, update this state and the
transformation matrix in weston_output_mode_switch().
Make overlays work when the client uses a buffer with the same
transformation as the output.
In order to calculate the destination rectangle, the same logic in
weston_surface_to_buffer_float() is needed, but with the output
dimensions instead. For that reason, this patch generalizes this
function into weston_transformed_{coord,rect} and moves it to util.c.
The surface functions are then implemented using those.
A client can reliably avoid allocating a second buffer per surface, if
the compositor sends the wl_buffer.release event before the frame
callback. To enable clients' single-buffering, release the wl_buffer
early if possible. Otherwise clients will double-buffer.
Releasing early is not possible, if the backend needs the buffer for
migrating a surface to or from a non-primary weston_plane. In that case,
a new buffer must arrive, before the old can be released. Backends will
indicate this by setting weston_surface:keep_buffer to 1 in
assign_planes().
A proper buffer reference in the backends would be better than the
keep_buffer flag, but that would require a per-surface backend private.
The rpi and DRM backends are updated to set keep_buffer, other backends
do not support planes, so do not have to set it.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The wl_buffer reference counting API has been inconsistent. You would
manually increment the refcount and register a destroy listener, as
opposed to calling weston_buffer_post_release(), which internally
decremented the refcount, and then removing a list item.
Replace both cases with a single function:
weston_buffer_reference(weston_buffer_reference *ref, wl_buffer *buffer)
Buffer is assigned to ref->buffer, while taking care of all the refcounting
and release posting. You take a reference by passing a non-NULL buffer, and
release a reference by passing NULL as buffer. The function uses an
internal wl_buffer destroy listener, so the pointer gets reset on
destruction automatically.
This is inspired by the pipe_resource_reference() of Mesa, and modified
by krh's suggestion to add struct weston_buffer_reference.
Additionally, when a surface gets destroyed, the associated wl_buffer
will send a release event. Often the buffer is already destroyed on
client side, so the event will be discarded by libwayland-client.
Compositor-drm.c is converted to use weston_buffer_reference.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The protocol does not require us to flush_damage() on wl_buffer
destruction. In fact, by the time the server receives this request, the
client may have already clobbered the buffer's storage, so we could be
reading undefined data. Instead, just forget about the buffer. The
protocol already says, that a client must not destroy a buffer that is
being read by the server, or the window contents become undefined.
The practical reason for this change is that the following commit can
consolidate wl_buffer destruction listener handlers.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
If a client called wl_surface.attach with the same wl_buffer as
previously, the compositor would mistakenly send a release on that
buffer. This will cause problems only when clients start to properly use
the wl_buffer.release event.
Do not send wl_buffer.release if the same buffer is attached again.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The implementation of buffer transformation didn't handle transformed
shm buffers properly. The partial texture upload was broken since the
damage is in surface coordinates that don't necessarily match the
buffer's coordinates. It also wouldn't handle the buffer stride
properly, resulting in incorrect rendering if it didn't match the
buffer's width.
The logic used for converting texture coordinates was generalized and
moved out of the renderer, since this conversion may be useful in other
places, such as the backends.
Implement the wl_surface.set_buffer_transform request. This includes
tracking the double-buffered buffer transformation parameter and making
the gl renderer able to handle transformed buffers.
Backends may move surfaces to different planes, in which case damage is
generated in the primary plane. This damage is usually passed to the
renderer, but in some cases the backend may decide to not render
anything (that's the case when drm compositor scans out a client
buffer). In that case the damage on the primary plane would be
discarded, leading to artifacts later.
This patch makes the backend's responsibility to clear the damage on
the primary plane, so that unrendered damage is kept for as long as
necessary.
Move fields current_buffer and buffer_damage out of weston_output into
gl_output_state, since they are actually specific to the renderer.
Also bring back the previous_damage field so that the screenshooter
can get the damage for the previous frame in a renderer independent
way.
This moves the surface color state into gles2-renderer. To do this it
adds two new weston_renderer functions. create_surface to be able to
create per-surface renderer state, and surface_set_color to set the
color of a surface and changes it to a color surface.
When a surface is on a non-primary plane (overlay), we do not need to
keep the GL texture up-to-date, since we are not using it. Avoid calling
glTex(Sub)Image2D in that case, and accumulate the texture damage
separately.
This is especially useful for backends, that can put wl_shm buffers into
overlays.
The empty damage check has to be moved from surface_accumulate_damage()
into gles2_renderer_flush_damage(), because it really needs to check the
accumulated damage, not only the current damage. Otherwise, if a surface
migrates from a plane to the primary plane, and does not have new
damage, the texture would not be updated even for accumulated damage.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Instead of hardcoding drm-backend.so as the default if environment
presents neither Wayland nor X11, have a ./configure option to change
it. It still defaults to drm-backend.so, if not given.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add the concept of debug key bindings, that are bindings that activate
debug features in the compositor. The bindings are added to a list in
the compositor, but the triggering them is left to the shell.
On the shell side, a global debug key binding is added. When the user
presses mod-shift-space, the shell will invoke the debug bindings based
on the next key press.
This also converts the debug shortcuts for repaint debugging, fan
repaint debugging and the hide overlays shortcut in compositor-drm to
use the new infrastructure.
The following sequence:
wl_surface::attach(s, b, 1, 2)
wl_surface::commit(s)
wl_surface::commit(s)
would actually result in the surface getting moved by (2,4) as the
pending attach delta wasn't reset on commit, only by another attach.
This only shows up on single-buffered surfaces.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Every single frame, we were calling the flush_damage handler in the
renderer. For GLES2 with subimage, this wasn't too bad as we'd never
call glTexSubImage2D, but without it, we'd upload the entire frame
through glTexImage2D every time.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Culling of the repaint of a surface behind an opaque surface on the
same plane was broken by commit 547149a9 [1]. The idea of that commit
is that the damage obscured by an overlay would remain on the primary
plane damage and be repainted when the overlay moved. However, in the
case the two surfaces are on the same plane, the opaque one is not
obscured, so it ends up being repainted.
This commit adds an opaque field to struct weston_plane, that is built
incrementally when accumulating damage. The opaque region of surfaces
on the same plane are removed from the plane's damage, restoring the
previous culling behavior. But since damage behind opaque region of
other planes is maintained, the bug solved in the mentioned commit is
not regressed.
https://bugs.freedesktop.org/show_bug.cgi?id=56537
Partial repaints have been broken since the introduction of the atomic
surface updates. The problem was that surface_commit would set the
geometry dirty flag unconditionally, causing transform updates on every
frame which would in turn cause weston_surface_damage_below() to damage
the whole surface area.
This patch changes this so that flag is only set if the pending buffer
has a different size, the location of the surface changed or the opaque
region changed.
Note that changing the opaque region will cause a full repaint of the
affected surface, because of the transform update.
https://bugs.freedesktop.org/show_bug.cgi?id=56538
Kristian Høgsberg
Giulio Camuffo
Ander Conselvan de Oliveira
Rafal Mielniczuk
Marcin Slusarz
Jan Arne Petersen
Scott Moreau
Vasily Khoruzhick
Rob Bradford
Pekka Paalanen
John Kåre Alsaker
Daniel Stone