get_output_work_area() now returns the absolute work area including the
output's offset.
This will make math a little simpler later when we use it to constrain
window moves.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Addresses this warning found by Denis Denisov:
[src/logind-util.c:702]: (warning) %d in format string (no. 1)
requires 'int' but the argument type is 'unsigned int'.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Adds basic support for optionally outputting in the XML format
commonly used by JUnit compatible tools.
This format is supported by default by many tools, including
the Jenkins build system. It also is more detailed and
captures more information than the more simplistic TAP
format.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
dist_wayland_session_DATA will distribute and install src/weston.desktop, so the
definition of wayland_session_DATA which also installs src/weston.desktop will
result in the file being installed twice and (rarely) cause install to fail.
Spotted and fix by Roy Li <rongqing.li@windriver.com>.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Currently rotate is on the right mouse button and resize is on the middle.
As fantastic as rotating windows is, it's probably nicer to have resize on
the right button, especially for anyone with only 2 buttons.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Going from seat to input device requires that we test the device
before relying on the pointer. In all of these binding functions
we can trust exactly one input device type directly. If we pass
that in instead of a seat it's more obvious that we can trust
the one pointer we have.
When a seat is required, we can access through the device we have
and use that to get to other device types for the seat, provided
we validate them appropriately.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't need the seat pointer, and the caller should already have
tested that the keyboard pointer is valid.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
This should be identical to the pointer in shset->seat.
A later patch prevents direct access to seat->pointer, using the
known valid pointer in the grab will be nicer than using the
getter functions that patch introduces.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't actually need the seat and we have to validate that the seat
has a pointer before making the call, so it's safer just to pass
the validated pointer.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't actually need the seat and we have to validate that the seat
has a pointer before making the call, so it's safer just to pass
the validated pointer.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It doesn't actually need the seat and we have to validate that the seat
has a pointer before making the call, so it's safer just to pass
the validated pointer.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
It never actually needs the seat, and we always verify the touch pointer
before calling it, so let's just pass a touch pointer instead of having
an assumption that the seat's touch pointer has been verified.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Normally we need to check if a seat's [device_type]_count is > 0 before
we can use the associated pointer. However, in a binding you're
guaranteed that the seat has a device of that type. If we pass in
that type instead of the seat, it's obvious we don't have to test it.
The bindings can still get the seat pointer via whatever->seat if they
need it.
This is preparation for a follow up patch that prevents direct access
to seat->device_type pointers, and this will save us a few tests at
that point.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
These functions should never be called outside of the core.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
We shouldn't actually use the keyboard pointer unless we check that
a keyboard is present.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Cut a chunk of code out from drm_output_set_cursor() and form a new
function for writing a cursor bo data from a weston_view with a wl_shm
buffer.
Add more asserts to verify the assumptions in there.
v2: Use drm_compositor::cursor_{width,height} instead of hard-coded 64.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Instead of testing against a hardcoded 64x64 pixel size to see if a view
is suitable for promotion to a cursor plane, use our cursor_width and
cursor_height variables.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Track the current DPMS level for any given output, and track failure (or
otherwise) of the DPMS-setting property call.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Makes create_output_for_connector() slightly easier to read.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Refactor the code constructing the connector name into a new function.
This makes create_output_for_connector() slightly easier to read.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Refactor the code for choosing the initial mode for an output from
create_output_for_connector() to drm_output_choose_initial_mode().
This makes create_output_for_connector() slightly easier to read.
v2: Document everything.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
If a stopped repaint loop gets restarted due to posting of new
damage, and this restart of the repaint loop happens late in the
video refresh cycle, ie. already inside the repaint-window and
thereby after the composition deadline for the current frame,
then defer the actual output repaint to the composition deadline
of the next video refresh cycle by setting the repaint timer
accordingly.
This tries to make sure that:
a) Client(s) posting damage timely before the composition deadline
(video refresh duration - "repaint-window" duration) of the
current refresh cycle will trigger a repaint within the current
refresh cycle, thereby avoiding one extra frame of compositor
lag due to the needed restart of the repaint loop if the loop
was stopped. This allows them to benefit from the earlier
"instant repaint restart" commit to keep latency low.
b) Late clients which post damage close to the end of a refresh
cycle can't race other clients if the repaint loop is restarted.
Instead they will get deferred to the next compositor cycle,
just as if the repaint loop would have been already running -
the semantic of the "repaint-window" parameter is preserved.
This is especially important to prevent a very late client
from triggering a repaint very close to the vblank, which
would cause the compositor to certainly miss the vblank and
skip one frame and then cause a delay of another frame for
other clients which posted their damage in time for the
following frame. Iow. this provides clients with a more
predictable compositor timing and makes it easier for them
to latch onto the compositors repaint cycle.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
drm_output_start_repaint_loop() incurred a delay of
one refresh cycle by using a no-op page-flip to get
an accurate vblank timestamp as reference. This causes
unwanted lag whenever Weston exited its repaint loop, e.g.,
whenever an application wants to repaint with less than
full video refresh rate but still minimum lag.
Try to use the drmWaitVblank ioctl to get a proper
timestamp instantaneously without lag. If that does
not work, fall back to the old method of idle page-flip.
This optimization will work on any drm/kms driver
which supports high precision vblank timestamping.
As of Linux 4.0 these would be intel, radeon and
nouveau on all their supported gpu's.
On kms drivers without instant high precision timestamping
support, the kernel is supposed to return a timestamp
of zero when calling drmWaitVblank() to query the current
vblank count and time iff vblank irqs are currently
disabled, because the only way to get a valid timestamp
on such kms drivers is to enable vblank interrupts and
then wait a bit for the next vblank irq to take a new valid
timestamp. The caller is supposed to poll until at next
vblank irq it gets a valid non-zero timestamp if it needs
a timestamp.
This zero-timestamp signalling works up to Linux 3.17, but
got broken due to a regression in Linux 3.18 and later. On
Linux 3.18+ with kms drivers that don't have high precision
timestamping, the kernel erroneously returns a stale timestamp
from an earlier vblank, ie. the vblank count and timestamp are
mismatched. A patch is under way to fix this, but to deal with
broken kernels, we also check non-zero timestamps if they are
more than one refresh duration in the past, as this indicates
a stale/invalid timestamp, so we need to take the page-flip
fallback for restarting the repaint loop.
v2: Implement review suggestions by Pekka Paalanen, especially
extend the commit message to describe when and why the
instant restart won't work due to missing Linux kernel
functionality or a Linux kernel regression.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
v3: Fix timespec_to_nsec() which was computing picoseconds,
use the new timespec-util.h helpers.
v4: Rebased to master, split long lines.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A helper to improbe readability.
Cc: Daniel Stone <daniels@collabora.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A new optional parameter "-d msecs" allows to specify a
delay before the surface attach/damage/commit to shift
the point in time when a surface update is committed.
This allows to test how different client timings interact
with the compositors repaint timing.
Suggested by Pekka Paalanen.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: Clarify the intent, doing a delay in window_create_feedback()
is a bit surprising. Use nanosleep() instead of clock_nanosleep(),
which may not support the chosen presentation clock.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
What is libweston and where do we intend to go with it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Jon A. Cruz <jonc@osg.samsung.com>
Transform matrix for transforming a surface to global_matrix is
calculated from
* ivi_layout_surface_properties
* ivi_layout_layer_properties
This patch pareares sub-method like following,
1/ calc_surface_to_global_matrix()
calc_transformation_matrix() is called twice with
ivi_layout_surface/layer_properties respectively.
2/ calc_transformation_matrix()
This calcurates matrix from orientation, source rectangle and
destination rectangle.
2-1/ To calculate rotation, fit centor of source rectangle to (0,0)
temporarily. This is moved back in 2-4.
2-2/ Apply rotation variant
2-3/ Apply scale variant
2-4/ Apply positioning variant, taking account into 2-1 temporary
positioning.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
To refactor transform of ivi_layout_surface and ivi_layout_surface to be
more readable logical flow.
Remove following parts once,
* definition of weston_transform in ivi_layout_surface
* update_layer_orientation
* update_layer_position
* update_surface_position
* update_surface_orientation
* update_scale
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There is no logic update.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This reverts commit d3553c721c.
weston_wm_write_property() takes the ownership of the reply it gets as
a parameter, and will eventually free it later in writable_callback.
This change introduced a double-free when Xwayland programs triggered a
copy to the clipboard, leading to a Weston crash.
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Documentation for the prepare_lock_surface event description is
incorrect. The summary says "Tell the client..." however the full-text
description says "tell the shell..."
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[This time include the actual changes.]
Documentation for the prepare_lock_surface event description is
incorrect. The summary says "Tell the client..." however the full-text
description says "tell the shell..."
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The wl_list_for_each operation on the free_buffers list should use
free_link not link, which is a different list.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
When an output is being destroyed reassign the output of the views
that were in it, to be sure not to keep a dangling pointer which could
be used later on by calling weston_surface_assign_output() on the
view's surface.
Also make sure we send wl_surface.leave events to the surfaces that
were in that output.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The wl_list_for_each operation on the free_buffers list should use
free_link not link, which is a different list.
This fixes a crash when entering fullscreen mode when using the pixman
renderer on the wayland back-end.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
dump_property allows reply to be NULL. Calling it unconditionally will
ensure user knows where the selection failed.
Also refactor code a bit.
Suggested by Marek Chalupa
The man pages indicate this routine can return NULL on certain error
conditions.
Suggested by Marek Chalupa
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Make it a bool in both surface_move() and struct weston_move_grab
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This commits starts to separate the libweston code from the weston
specific code. As such, the main() is moved, together with signals
handling and configuration handling.
The definition of DEFAULT_REPAINT_WINDOW is left in compositor.c, so the
config loading of repaint_msec is slightly modified to account that.
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Derek Foreman
Bryce Harrington
Ryo Munakata
Jon A. Cruz
Ross Burton
Pekka Paalanen
Daniel Stone
Mario Kleiner
Nobuhiko Tanibata
Emmanuel Gil Peyrot
Christopher Michael
Giulio Camuffo