Add a new boolean weston.ini option, "allow-zap" to enable or disable
the Ctrl-Alt-Backspace key combination.
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
The xwm used to automatically send to Xwayland the position of X windows
when that changed, using the x,y of the primary view of the surface.
This works fine for the desktop shell but less so for others.
This patch adds a 'send_position' vfunc to the weston_shell_client that
the shell will call when it wants to let Xwayland know what the position
of a window is.
The logic used by the desktop-shell for that is exactly the same the xwm
used to have.
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: David Fort <contact@hardening-consulting.com>
In the effort of going away from generic names of protocols only
relevant for weston, rename the weston desktop shell
weston_desktop_shell.
This also resets the version to 1, as there will be no prior versions
to weston_desktop_shell.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Normally we need to check if a seat's [device_type]_count is > 0 before
we can use the associated pointer. However, in a binding you're
guaranteed that the seat has a device of that type. If we pass in
that type instead of the seat, it's obvious we don't have to test it.
The bindings can still get the seat pointer via whatever->seat if they
need it.
This is preparation for a follow up patch that prevents direct access
to seat->device_type pointers, and this will save us a few tests at
that point.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Desktop shell demoted all fullscreen shell surfaces on all active
outputs of a multi-display setup whenever any shell surface was
activated anywhere. This made it impossible to have multiple
fullscreen windows on separate outputs active at the same
time, as creating or activating any shell surface would disable
fullscreen status for all existing fullscreen surfaces.
Make lower_fullscreen_layer() more selective, so on request it
only demotes fullscreen surfaces on a specified weston_output.
The activate() method for a specific surface will now only request
demotion of fullscreen surfaces on the target output of the activated
surface, but leave fullscreen surfaces on unrelated outputs alone.
Desktop wide acting functions like the window switcher or exposay
will still demote all fullscreen surfaces on all outputs to
implement their effect as before.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
We used to rely on the order in which the
weston_compositor::destroy_signal callbacks happened, to not access
freed memory. Don't know when, but this broke at least with ivi-shell,
which caused crashes in random places on compositor shutdown.
Valgrind found the following:
Invalid write of size 8
at 0xC2EDC69: unbind_input_panel (input-panel-ivi.c:340)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea360 is 208 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0D7: wl_list_remove (wayland-util.c:57)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea370 is 224 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0E7: wl_list_remove (wayland-util.c:58)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea368 is 216 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Looking at the first of these, unbind_input_panel() gets called when the
text-backend destroys its helper client which has bound to input_panel
interface. This happens after the shell's destroy_signal callback has
been called, so the shell has already been freed.
The other two errors come from
wl_list_remove(&input_panel_surface->link);
which has gone stale when the shell was destroyed
(shell->input_panel.surfaces list).
Rather than creating even more destroy listeners and hooking them up in
spaghetti, modify text-backend to not hook up to the compositor destroy
signal. Instead, make it the text_backend_init() callers' responsibility
to also call text_backend_destroy() appropriately, before the shell goes
away.
This fixed all the above Valgrind errors, and avoid a crash with
ivi-shell when exiting Weston.
Also using desktop-shell exhibited similar Valgrind errors which are
fixed by this patch, but those didn't happen to cause any crashes AFAIK.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
This is a follow-up for the patch that removed weston-screensaver. The
aim is to clean up shell.c a little by removing non-essential
components. Vanilla Weston desktop is only a demo, external projects are
encouraged to create user-friendly desktop environments.
The support for launching a screensaver client and the protocol bindings
are removed. With them, all related configuration options are removed,
and the manuals are updated accordingly.
The screensaver protocol definition is left in desktop-shell.xml for
posterity.
This does not affect Weston's or desktop-shells ability to put screens
to sleep after inactivity. The inactivity timer continues to operate as
before. Also screen locking is unaffected.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Giulio Camuffo <giuliocamuffo@gmail.com>
If weston-desktop-shell dies soon after launch, or maybe cannot be
executed at all, let weston exit rather than letting the user stare at a
black screen.
But, do not exit weston, if weston-desktop-shell dies later, as the user
may already have apps open, and those apps would likely still function
correctly. This gives the user the opportunity to save his work and
close the apps properly.
This should make one class of "I see only black screen" failures obvious.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
The desktop shell plugin registers both a wl_client destroy signal
listener, and a sigchld handler, when launching weston-desktop-shell.
However, nothing guarantees in which order do the wl_client destructor
and the sigchld handler run.
Luckily, the sigchld handler cannot interrupt any code, because we
handle the signal via signalfd, which means it is handled like any event
in the compositor's main event loop.
Still, shell.c has a race, that when lost, can cause a crash, as
described in bug #82957.
If the sigchld handler happens to run first, it will try to launch a new
weston-desktop-shell without removing the destroy listener from the old
wl_client first. This leads to list corruption, that may cause a crash
when the old wl_client gets destroyed.
Simply removing the destroy listener in the sigchld handler is not
enough, because respawning sets shell->child.client pointer, and if
the wl_client destructor runs after, it will reset it to NULL.
OTOH, the wl_client destroy handler cannot reset shell->child.process,
because that would cause the sigchld handler in weston core to not find
the process tracker anymore, and report that an unknown process exited.
Turns out, that to make everything work, we would need to wait for both
the wl_client destructor and the sigchld handler to have run, before
respawn. This gets tricky.
Instead, solve the problem by removing shell->child.process. Use the new
weston_client_start() which automatically creates and manages the struct
weston_process. The shell does not need to know about the process exit,
it only needs to know about the client disconnect. Weston-desktop-shell
will never attempt to reconnect, and it would not work even if it did,
so disconnect is equivalent to weston-desktop-shell exiting.
This should permanently solve the race for weston-desktop-shell.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=82957
Cc: Boyan Ding <stu_dby@126.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Panels are always assumed to be on the top edge of the output. If this
is not the case views will be placed under the panel, wherever it is,
and maximize doesn't use the correct space allocated for views.
By telling the server on which edge the panel is located, it can
correctly calculate where to put new views and how big maximized views
should be.
[Pekka Paalanen: the user of this protocol so far is Maynard.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
At the moment when surfaces are destroyed they are faded out but let's
make it configurable!
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Previously, desktop-shell would only create its internal shell_seat object
for each seat available when the desktop-shell module is loaded. This is a
problem any time seats are created dynamically. In particular, the Wayland
and RDP backends create seats on an as-needed basis and they weren't
getting picked up proprely by desktop-shell.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77649
lower_fullscreen_surface() was removing fullscreen surfaces from
the fullscreen layer and inserting them in the normal workspace
layer. However, those fullscreen surfaces were never put back in
the fullscreen layer, causing bugs such as unrelated surfaces
being drawn between a fullscreen surface and its black view.
Change the lower_fullscreen_surface() logic so that it lowers
fullscreen surfaces to the workspace layer *and* hides the
black views. Make this reversible by re-configuring the lowered
fullscreen surface: when it is re-configured, the black view
will be shown again and the surface will be restacked in the
fullscreen layer.
https://bugs.freedesktop.org/show_bug.cgi?id=73575https://bugs.freedesktop.org/show_bug.cgi?id=74221https://bugs.freedesktop.org/show_bug.cgi?id=74222
Previously, the repositioning logic would iterate the compositor's list
of layers and move the views on those layers. However, that failed in
two different ways: it didn't cover hidden workspaces and crashed when
the display was locked.
This patch changes the logic to explicit iterate over all the layers
owned by the shell. The iteration is done through a helper function,
shell_for_each_layer().
https://bugs.freedesktop.org/show_bug.cgi?id=76859https://bugs.freedesktop.org/show_bug.cgi?id=77290
We now handle the client-side xdg_surface_set_minimized()
call, and eventually hide the target surface by moving it
to a dedicated layer.
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Since that signal is per output, it is necessary to track in which
output a view is in so that the signal is handled properly.
Instead, add a compositor wide output moved signal, that is handled by
the shell. The shell iterates over the layers it owns to move views
appropriately.
Add a config file option to enable it, but leave it off by default. Exposay
still triggers too many lock-ups or stuck grabs and triggers under X even
when the Wayland window doesn't have keyboard focus.
Set the internal pointer for the client to NULL. This fixes a
segmentation fault at shutdown, where the shell would hang up before
and cause libwayland to call wl_client_destroy(). When the shell was
destroyed later, another call to wl_client_destroy() would cause the
crash.
https://bugs.freedesktop.org/show_bug.cgi?id=72550
Bob Ham
Giulio Camuffo
Jonas Ådahl
Derek Foreman
Mario Kleiner
Pekka Paalanen
Bryce Harrington
Jonny Lamb
Jason Ekstrand
Emilio Pozuelo Monfort
Ander Conselvan de Oliveira
Manuel Bachmann
Kristian Høgsberg