Currently we destroy the renderer before the outputs are destroyed, but
that sometimes leads to an error since a reference to the renderer is
necessary in order to destroy a gl_renderer_output.
Since destroying the renderer is common among all backends, just move
that call into weston_compositor_shutdown() immediately after the
outputs being destroyed.
While the pixman image might be attached, the underlying buffer might be
already gone under certain circumstances. This is easily reproduced by
attempting to resize gnome-terminal on a fbdev backend.
$ WAYLAND_DEBUG=1 strace -emunmap weston --backend=fbdev-backend.so
...
[1524826.942] wl_shm@7.create_pool(new id wl_shm_pool@23, fd 40, 1563540)
[1524827.315] wl_shm_pool@23.create_buffer(new id wl_buffer@24, 0, 759, 515, 3036, 0)
...
[1524829.488] wl_surface@14.attach(wl_buffer@24, 0, 0)
[1524829.766] wl_surface@14.set_buffer_scale(1)
[1524829.904] wl_surface@14.damage(0, 0, 759, 515)
[1524830.248] wl_surface@14.frame(new id wl_callback@25)
[1524830.450] wl_surface@14.commit()
...
[1524846.706] wl_shm@7.create_pool(new id wl_shm_pool@26, fd 40, 1545000)
[1524847.215] wl_shm_pool@26.create_buffer(new id wl_buffer@27, 0, 750, 515, 3000, 0)
[1524847.735] wl_buffer@24.destroy()
[1524847.953] -> wl_display@1.delete_id(24)
[1524848.144] wl_shm_pool@23.destroy()
munmap(0xb5b2e000, 1563540) = 0
[1524849.021] -> wl_display@1.delete_id(23)
[1524849.425] wl_surface@14.attach(wl_buffer@27, 0, 0)
[1524849.730] wl_surface@14.set_buffer_scale(1)
[1524849.821] wl_surface@14.damage(0, 0, 750, 515)
<No commit yet, so drawing is attempted from older buffer that used to be
attached to the surface, which happens to come from a destroyed pool,
resulting it an invalid read from address 0xb5b2e000>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Remove those listeners when the output is destroyed, otherwise they'll
point to invalid data that may lead to corruption when assigning a new
output for the view.
--
This is possibly related to bug 72845. I didn't have enough equipment
to try and reproduce it.
https://bugs.freedesktop.org/show_bug.cgi?id=72845
Record from the output of the surface that has keyboard focus for the
seat used to activate the recorder key binding. If there is no focused
surface, record from the first one.
Also, use the weston_transformed_region() to transform the damage
region of the output into the coordinates expected by read_pixels().
https://bugs.freedesktop.org/show_bug.cgi?id=71401
If the compositor hasn't been rendering for a while when the recording
stops, the time difference between the last rendered frame and that
moment won't be in the encoded video. Fix that by forcing one extra
frame to be recorded when the user presses the recorder key binding.
https://bugs.freedesktop.org/show_bug.cgi?id=71142
This client tests the wl_scaler and wl_surface_scaler protocol
extensions by cropping and then scaling a surface to ensure it is
rendered correctly. More details in comments in the code.
The pixman renderer doesn't use the weston_surface_to_buffer*
functions to alter coordinates depending on buffer transformation,
buffer scaling, and surface scaler (wl_surface_scaler).
pixman_transform_scale() is used instead to perform said
transformations without having to modify each coordinate.
Implements wl_surface_scaler.set by setting desired
src_{x,y,width,height} and dst_{width,height} values in the
weston_buffer_viewport struct, then altering coordinates in
weston_surface_to_buffer* functions if there is a scaler set for said
surface.
This registers the wl_scaler global object and lets clients create
wl_surface_scaler objects for surfaces. wl_surface_scaler.set is not
implemented so this doesn't really do anything useful yet.
Add cropping and scaling to wl_surface.
Add a global factory interface wl_scaler, which creates
wl_scaler_surface objects tied to a given wl_surface. The
wl_scaler_surface object can be used to set a cropping and scaling
transformation to change how a wl_buffer maps to wl_surface contents.
Changes in v2:
Take into account buffer_transform and buffer_scale, and try to explain
more clearly how the coordinate transformations work and what their
order is. Add, that crop and scale state is double-buffered. Explain
missing dst_x, dst_y. Clarify that undefined content still is some
content, but NULL buffer implies no content nor size.
Changes in v3:
Disallow zero values for dst_width and dst_height.
Open issues:
Should this be a separate interface like here, or just a wl_surface
request?
If we keep this as a separate interface, rename wl_surface_scaler to
wl_viewport.
Surfaces that are created by clients get their size automatically updated
by the attach/commit. Surfaces created directly by shells (such as black
surfaces) sometimes need to be manually resized. This function allows you
to do that while being somewhat less messy than messing with the internals
of weston_surface manually.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
If the saved position for a fullscreen or maximized output view is in an
output that has been unplugged, the coordinates don't make sense
anymore. In that case, invalidate them and use the initial position
algorithm when changing them back to the basic state.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Previously, if a pointer was inside an output that was unplugged, it
could potentialy end up outside any valid output forever. With this
patch, the pointer is moved to the "closest" output to the pointer.
Set a flag when an output is being destroyed and use that to avoid
repainting. This allows functions that schedule an output repaint to
be called when the output is being destroyed without causing the
compositor to crash.
Use the output destroy signal to move the views in the event the output
was unplugged.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Previously, when an output was moved due to another output being
unplugged, the views on the first output would remain in the same
position.
This patch adds an output_move signal that the views listen too in
order to repostion themselves in the event of an unplug.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Instead of having the backends move the remaining outputs when one is
destroyed, let the core compositor deal with that.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
When destroying ouputs, they would sometimes be removed before the call
to weston_output_destory() and sometimes after, depending on the
backend. Now the output is remove withing that function so the behavior
is standard across all backends.
We now no longer add joysticks at all. They show up as absolute motion
devices without has_button, so we don't add them as a pointer. We may add
a keyboard for the keyboard-style keys, but that's fine. With the previous
commit, we no longer generate spurious absolute pointer motion for the abs
axes.
https://bugs.freedesktop.org/show_bug.cgi?id=71687
Some joysticks have certain buttons that acts keyboard keys. As such,
we'll reconize them as keyboards but not pointers. In that case, don't
send pointer motion events when we get absolute joystick events.
This rule triggers for devices with an ABS_X/Y evaluators and no
keyboard or multitouch events. There is no way we would ever add such
a device as a pointer, keyboard or touch device anyway. A pointer
device requires has_button (in which case the !has_key condtion would
fail); a keyboard device would also mean !has_key is false and a touch
screen device implies that !device->is_mt is false.
We split the device probing and idenfication somewhat arbitrarily between
these two functions. This commit combines them into one. Return of -1
indicates error, 0 success, but succesful probing can return a device
with device->caps == 0, which means we don't handle the device.
This adds a test that tries to simulate a simple game loop that would
be like this:
while (1) {
draw_something();
eglSwapBuffers();
}
In this case the test is relying on eglSwapBuffers to throttle to a
sensible frame rate.
The test then verifies that only 2 EGL buffers are used. This is done
via a new request and event in the wayland-test protocol.
Currently this causes 3 buffers to be created because the release
event generated by the swap buffers is not processed by Mesa until it
blocks for the frame complete event in the next swap buffers call, but
that is too late.
This can be fixed in Mesa by issuing a sync request after the swap
buffers and blocking on it before deciding whether to allocate a new
buffer.
The surface type now no longer changes and we track pending state changes in
next_state. Instead of testing type != next_type to detect changes in
state, we just look at state_changed.
An xwayland surface corresponds to a override-redirect window under X,
which is typically a menu or a popup window. They typically appear
with a keyboard and mouse grab and by nature of being override-redirect
these window can appear anywhere on screen and in the stack.
We need to resort to heuristics to decide where to place the
override-redirect in our surface stack, and for now we'll just put it on
top of everything. That's going to be correct for almost all cases of
clicking to open a menu, but we can revisit and refine if we run into
a case that needs better handling.
Just as for set_maximized() we can move the setting of the fullscreen and
state_changed flags into the common set_fullscreen() function. This
function is also used from the xwayland wm to set fullscreen windows, and
with this change that now works again.
We can set the maximized and state_changed flags in set_maximized(),
which is shared between shell_surface_set_maximized() and
xdg_surface_set_maximized().
Ander Conselvan de Oliveira
Lubomir Rintel
Kristian Høgsberg
Jonny Lamb
Pekka Paalanen
Jason Ekstrand
Zhang, Xiong Y
Giulio Camuffo
Jasper St. Pierre
Neil Roberts