The function is used from vrend_renderer.c, so it also should be
part of the libvrend.la conveniance library. This requires that the
CONTEXT enums and the variable egl are also part of this library.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
v2: Fix another missing return value warning
Fix a warning about braces around an empty statement
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is needed to check the resource creation parameters.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
For this introduce a NDEBUG_UNUSED macro
v2: Replace NDEBUG_UNUSED with MAYBE_UNUSED (Emil)
Silence unused warnings only if NDEBUG is defined
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
These values are unsigned, but the temporaries are always assumed to be in float
representation, and the temps values will be re-interpreted as integers when
needed. Hence above values must not be value-converted to float but the
bit-representation must be maintained when they are stored in a temp register.
Fixes#105
Signed-off-by: Lepton Wu <lepton@chromium.org>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
- Host plane offset queried from the gbm_bo should not be accumulated
across plane transfer loop iterations.
- Host plane stride cannot be calculated from host plane0 stride in a
generic way, as alignment adjustments cannot be subsampled. Instead of
trying of trying to calculate the stride, just query the gbm_bo for
it.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This patch adds the meson build system as alternative to the
autotools build system.
v2: Thanks to Alexandros for his comments that lead to the following changes:
- Fix logic for platforms so that the ones selected by 'auto' don't
fail if the dependencies are missing, but fail when explicitely
requested
- declare project version differently
- set a minimun meson version
- clean up some braces
- reformat some code
- squesh remaining separate patches
v3: require meson 0.46 (Gurchetan)
v4: set minimum gbm version to 18.0.0
v5: - fix gbm version requirement (Gurchetan)
- don't duplicate glx files (Gurchetan)
Fixes: #129
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
In systems with more then one graphics card the rendernode is currently
picked based on the order in which they are listed in /dev/dri. Add an
command line option and a environment variable to make it possible to
specify the render node explicitely.
Fixes#135
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This change makes a set of changes to increase the range of gbm-based
resources that can be allocated:
- Add VIRGL_BIND_LINEAR to support linear gbm allocations.
- Relax the bind flag argument check if VIRGL_BIND_SHARED or
VIRGL_BIND_LINEAR is set.
- For resources allocated from gbm, only try to create an image if one
of the render target or sampler view bind flags is set.
- Don't try to calculate the internal image format for external images.
This change also fixes a use-after-free that could occur if external
image creation failed.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
I can only guess why this is needed, it seems that dQEP is now capable to
ignore the mesa error messages that are printed out in debug mode and captures
the right result instead of indicating "Incomplete"
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
With that we can trigger runs on master to make it easier to update to a
new good version.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The build log is too long to see errors at the end, only log
stderr.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
If there are regressions dump the number of changes and the head
of the diff file so one doesn't have to search in the artifacts
for a quick look at the problem.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The value should never haven been part of the shader key.
Fixes#132
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The comment claims that this is wrong and only used for debugging,
so replace the code with a debug message.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
BGRA formats don't support texture storage on GLES, but GLES supports
creating multisample textures only by using glTexStorage*Multisample,
so switch to a swizzled RGB* format.
v2: Simplify handling of whether we should emulate (Gurchetan)
v3: Fix spaces and use VREND_DEBUG (Gurchetan)
Related #126
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Don't use the shader key when forcing it.
Changing a shader key within vrend_create_shader will always force
virglrenderer to recreate the shader the next time it is looked up, so
memory usage will grow and performance will go down.
Also it is actually not needed if with each emitted back color also has a
corresponding front color is emitted. So restrict forcing two-sided coloring
to the cases where a back color is emitted without a front color, and don't
change the shader key.
Fixes#130
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
When doing a blit in blit_int we use the same context that we use for drawing.
Now with qemu or crostini blits may be issued that are not issued by the guest
program so that it expects a GL_FRAMEBUFFER_SRGB state that might actually have
been clobbered.
Keep track of how GL_FRAMEBUFFER_SRGB is set when the framebuffer state is issued,
and restore its value after doing a blit via glBlitFramebuffer.
Thanks to Lepton Wu for tracking this down.
Fixes#126
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Lepton Wu <lepton@chromium.org>
When transferring to/from a planar buffer, multiply by bytes-per-pixel
when computing each plane's stride from stride0. In particular, this
is necessary when transferring to/from biplanar yuv buffers.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
With old DRM implementations, drmPrimeHandleToFD always returned a fd
that could be mapped read/write. However, new kernels require the
DRM_RDWR flag to be specified to create read/write mappings.
Try passing the DRM_RDWR flag but fall back to the old way if that
fails.
Signed-off-by: David Stevens <stevensd@chromium.org>
Acked-By: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Running "make check" is quite slow if valgrind is enabled, and most of the time
failures is the result of a leak in the GL driver. Since when building packages
testing is enabled, this will make the package build fail when valgrind is
installed. So instead of automagically enabling valgrind when it is installed,
make it a configure option that also may fail if valgrind is not installed, but
requested.
v2: Use some lowercase variable to report enabled valgrind (Gurchetan)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Mesa has seen some fix for ARB_framebuffer_no_attachements that helps
softpipe, so update mesa and the results.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The interpolation identifier must come after the precise and invariant
specifier. Also add a newline after these specifiers to make it easier
parsable.
Fixes #128
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Since not all varyings are passed from one shader stage to the next,
the invariant flag must be set based on the SID and not the number of
the IO slot used.
Fixes: 5f28eb8868
shader: fix mismatching shader invariants on GL
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This looks like a typo, we should use view->target instead of
view->texture->target since we are handling the view.
This fixes these 12 tests:
dEQP-EGL.functional.image.create.gles2_cubemap_positive_x_rgb_texture
dEQP-EGL.functional.image.create.gles2_cubemap_positive_y_rgb_texture
dEQP-EGL.functional.image.create.gles2_cubemap_positive_z_rgb_texture
dEQP-EGL.functional.image.create.gles2_cubemap_negative_x_rgb_texture
dEQP-EGL.functional.image.create.gles2_cubemap_negative_y_rgb_texture
dEQP-EGL.functional.image.create.gles2_cubemap_negative_z_rgb_texture
dEQP-EGL.functional.image.render_multiple_contexts.gles2_cubemap_positive_x_rgb8_texture
dEQP-EGL.functional.image.render_multiple_contexts.gles2_cubemap_positive_y_rgb8_texture
dEQP-EGL.functional.image.render_multiple_contexts.gles2_cubemap_positive_z_rgb8_texture
dEQP-EGL.functional.image.render_multiple_contexts.gles2_cubemap_negative_x_rgb8_texture
dEQP-EGL.functional.image.render_multiple_contexts.gles2_cubemap_negative_y_rgb8_texture
dEQP-EGL.functional.image.render_multiple_contexts.gles2_cubemap_negative_z_rgb8_texture
Signed-off-by: Lepton Wu <lepton@chromium.org>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Also add ARB_clip_control to the supported extensions.
v2: Correct soname because of abi changes:
- since we now use the visibility('hidden') for internal functions
many functions are no longer exposed with the public interface
- some functions were added to the public interface
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> (v1)
Maybe it's a bug in mesa, maybe I didn't search long enough, but when I
use the source texture directly in the blit then occationally we hit #112,
and no unbinding of the textures from the texture unit or the framebuffers
involved seems to help.
Using a texture view, however, seem to solve the problem.
Fixes#112
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Sometime the shader key "color_is_twosided" is not set, but the vertex
shader only emits a back color and the fragment shader expects a front
color. So if a back color is found set the "twoside" key to force the emission
of the declaration for both, the front and the back color.
Fixes the piglits:
vertex-program-two-side
Fixes#123
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Keep track of the per SID back and front color emission and emit the
counterparts accordingly.
Fixes some of the piglits:
vertex-program-two-side
Related #123
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This should fix the following fuzzer failures.
SCARINESS: 10 (null-deref)
v2: Merge various checks (@davidriley)
Reviewed-by: David Riley <davidriley@chromium.org>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
This optimization is for some specific situation, but actually we
do see some android apps create 1x1 windows. So remove this optimization
now.
Signed-off-by: Lepton Wu <lepton@chromium.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
"out_supported_structure_mask" is a bitmask representing the structures that
virglrenderer knows how to handle for a given "in_stype_version".
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
For memoryBarrier() which require ARB_shader_image_load_store
extension, we need to add it as required extension, otherwise will get
compile failure for current compute shader version setting.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Gert Wollny
Lepton Wu
Gurchetan Singh
David Stevens
David Stevens
Zhenyu Wang