You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
weston/src/evdev.c

707 lines
18 KiB

/*
* Copyright © 2010 Intel Corporation
*
* Permission to use, copy, modify, distribute, and sell this software and
* its documentation for any purpose is hereby granted without fee, provided
* that the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
* documentation, and that the name of the copyright holders not be used in
* advertising or publicity pertaining to distribution of the software
* without specific, written prior permission. The copyright holders make
* no representations about the suitability of this software for any
* purpose. It is provided "as is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
* SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
* SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
* RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
* CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "config.h"
#include <errno.h>
#include <stdlib.h>
#include <string.h>
#include <linux/input.h>
#include <unistd.h>
#include <fcntl.h>
#include <mtdev.h>
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
#include <assert.h>
#include "compositor.h"
#include "evdev.h"
#define DEFAULT_AXIS_STEP_DISTANCE wl_fixed_from_int(10)
void
evdev_led_update(struct evdev_device *device, enum weston_led leds)
{
static const struct {
enum weston_led weston;
int evdev;
} map[] = {
{ LED_NUM_LOCK, LED_NUML },
{ LED_CAPS_LOCK, LED_CAPSL },
{ LED_SCROLL_LOCK, LED_SCROLLL },
};
struct input_event ev[ARRAY_LENGTH(map) + 1];
unsigned int i;
if (!(device->seat_caps & EVDEV_SEAT_KEYBOARD))
return;
memset(ev, 0, sizeof(ev));
for (i = 0; i < ARRAY_LENGTH(map); i++) {
ev[i].type = EV_LED;
ev[i].code = map[i].evdev;
ev[i].value = !!(leds & map[i].weston);
}
ev[i].type = EV_SYN;
ev[i].code = SYN_REPORT;
i = write(device->fd, ev, sizeof ev);
(void)i; /* no, we really don't care about the return value */
}
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
static void
transform_absolute(struct evdev_device *device, int32_t *x, int32_t *y)
{
if (!device->abs.apply_calibration) {
*x = device->abs.x;
*y = device->abs.y;
return;
} else {
*x = device->abs.x * device->abs.calibration[0] +
device->abs.y * device->abs.calibration[1] +
device->abs.calibration[2];
*y = device->abs.x * device->abs.calibration[3] +
device->abs.y * device->abs.calibration[4] +
device->abs.calibration[5];
}
}
static void
evdev_flush_pending_event(struct evdev_device *device, uint32_t time)
{
struct weston_seat *master = device->seat;
wl_fixed_t x, y;
int32_t cx, cy;
int slot, seat_slot;
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
slot = device->mt.slot;
switch (device->pending_event) {
case EVDEV_NONE:
return;
case EVDEV_RELATIVE_MOTION:
notify_motion(master, time, device->rel.dx, device->rel.dy);
device->rel.dx = 0;
device->rel.dy = 0;
goto handled;
case EVDEV_ABSOLUTE_MT_DOWN:
weston_output_transform_coordinate(device->output,
wl_fixed_from_int(device->mt.slots[slot].x),
wl_fixed_from_int(device->mt.slots[slot].y),
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
&x, &y);
seat_slot = ffs(~master->slot_map) - 1;
device->mt.slots[slot].seat_slot = seat_slot;
master->slot_map |= 1 << seat_slot;
notify_touch(master, time, seat_slot, x, y, WL_TOUCH_DOWN);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
goto handled;
case EVDEV_ABSOLUTE_MT_MOTION:
weston_output_transform_coordinate(device->output,
wl_fixed_from_int(device->mt.slots[slot].x),
wl_fixed_from_int(device->mt.slots[slot].y),
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
&x, &y);
seat_slot = device->mt.slots[slot].seat_slot;
notify_touch(master, time, seat_slot, x, y, WL_TOUCH_MOTION);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
goto handled;
case EVDEV_ABSOLUTE_MT_UP:
seat_slot = device->mt.slots[slot].seat_slot;
master->slot_map &= ~(1 << seat_slot);
notify_touch(master, time, seat_slot, 0, 0, WL_TOUCH_UP);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
goto handled;
case EVDEV_ABSOLUTE_TOUCH_DOWN:
transform_absolute(device, &cx, &cy);
weston_output_transform_coordinate(device->output,
wl_fixed_from_int(cx),
wl_fixed_from_int(cy),
&x, &y);
seat_slot = ffs(~master->slot_map) - 1;
device->abs.seat_slot = seat_slot;
master->slot_map |= 1 << seat_slot;
notify_touch(master, time, seat_slot, x, y, WL_TOUCH_DOWN);
goto handled;
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
case EVDEV_ABSOLUTE_MOTION:
transform_absolute(device, &cx, &cy);
weston_output_transform_coordinate(device->output,
wl_fixed_from_int(cx),
wl_fixed_from_int(cy),
&x, &y);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
if (device->seat_caps & EVDEV_SEAT_TOUCH)
notify_touch(master, time, device->abs.seat_slot,
x, y, WL_TOUCH_MOTION);
else if (device->seat_caps & EVDEV_SEAT_POINTER)
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
notify_motion_absolute(master, time, x, y);
goto handled;
case EVDEV_ABSOLUTE_TOUCH_UP:
seat_slot = device->abs.seat_slot;
master->slot_map &= ~(1 << seat_slot);
notify_touch(master, time, seat_slot, 0, 0, WL_TOUCH_UP);
goto handled;
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
}
assert(0 && "Unknown pending event type");
handled:
device->pending_event = EVDEV_NONE;
}
static void
evdev_process_touch_button(struct evdev_device *device, int time, int value)
{
if (device->pending_event != EVDEV_NONE &&
device->pending_event != EVDEV_ABSOLUTE_MOTION)
evdev_flush_pending_event(device, time);
device->pending_event = (value ?
EVDEV_ABSOLUTE_TOUCH_DOWN :
EVDEV_ABSOLUTE_TOUCH_UP);
}
static inline void
evdev_process_key(struct evdev_device *device, struct input_event *e, int time)
{
/* ignore kernel key repeat */
if (e->value == 2)
return;
if (e->code == BTN_TOUCH) {
if (!device->is_mt)
evdev_process_touch_button(device, time, e->value);
return;
}
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
evdev_flush_pending_event(device, time);
switch (e->code) {
case BTN_LEFT:
case BTN_RIGHT:
case BTN_MIDDLE:
case BTN_SIDE:
case BTN_EXTRA:
case BTN_FORWARD:
case BTN_BACK:
case BTN_TASK:
notify_button(device->seat,
time, e->code,
e->value ? WL_POINTER_BUTTON_STATE_PRESSED :
WL_POINTER_BUTTON_STATE_RELEASED);
break;
default:
notify_key(device->seat,
time, e->code,
e->value ? WL_KEYBOARD_KEY_STATE_PRESSED :
WL_KEYBOARD_KEY_STATE_RELEASED,
STATE_UPDATE_AUTOMATIC);
break;
}
}
static void
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
evdev_process_touch(struct evdev_device *device,
struct input_event *e,
uint32_t time)
{
const int screen_width = device->output->current_mode->width;
const int screen_height = device->output->current_mode->height;
switch (e->code) {
case ABS_MT_SLOT:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
evdev_flush_pending_event(device, time);
device->mt.slot = e->value;
break;
case ABS_MT_TRACKING_ID:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
if (device->pending_event != EVDEV_NONE &&
device->pending_event != EVDEV_ABSOLUTE_MT_MOTION)
evdev_flush_pending_event(device, time);
if (e->value >= 0)
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
device->pending_event = EVDEV_ABSOLUTE_MT_DOWN;
else
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
device->pending_event = EVDEV_ABSOLUTE_MT_UP;
break;
case ABS_MT_POSITION_X:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
device->mt.slots[device->mt.slot].x =
(e->value - device->abs.min_x) * screen_width /
(device->abs.max_x - device->abs.min_x);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
if (device->pending_event == EVDEV_NONE)
device->pending_event = EVDEV_ABSOLUTE_MT_MOTION;
break;
case ABS_MT_POSITION_Y:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
device->mt.slots[device->mt.slot].y =
(e->value - device->abs.min_y) * screen_height /
(device->abs.max_y - device->abs.min_y);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
if (device->pending_event == EVDEV_NONE)
device->pending_event = EVDEV_ABSOLUTE_MT_MOTION;
break;
}
}
static inline void
evdev_process_absolute_motion(struct evdev_device *device,
struct input_event *e)
{
const int screen_width = device->output->current_mode->width;
const int screen_height = device->output->current_mode->height;
switch (e->code) {
case ABS_X:
device->abs.x =
(e->value - device->abs.min_x) * screen_width /
(device->abs.max_x - device->abs.min_x);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
if (device->pending_event == EVDEV_NONE)
device->pending_event = EVDEV_ABSOLUTE_MOTION;
break;
case ABS_Y:
device->abs.y =
(e->value - device->abs.min_y) * screen_height /
(device->abs.max_y - device->abs.min_y);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
if (device->pending_event == EVDEV_NONE)
device->pending_event = EVDEV_ABSOLUTE_MOTION;
break;
}
}
static inline void
evdev_process_relative(struct evdev_device *device,
struct input_event *e, uint32_t time)
{
switch (e->code) {
case REL_X:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
if (device->pending_event != EVDEV_RELATIVE_MOTION)
evdev_flush_pending_event(device, time);
device->rel.dx += wl_fixed_from_int(e->value);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
device->pending_event = EVDEV_RELATIVE_MOTION;
break;
case REL_Y:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
if (device->pending_event != EVDEV_RELATIVE_MOTION)
evdev_flush_pending_event(device, time);
device->rel.dy += wl_fixed_from_int(e->value);
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
device->pending_event = EVDEV_RELATIVE_MOTION;
break;
case REL_WHEEL:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
evdev_flush_pending_event(device, time);
switch (e->value) {
case -1:
/* Scroll down */
case 1:
/* Scroll up */
notify_axis(device->seat,
time,
WL_POINTER_AXIS_VERTICAL_SCROLL,
-1 * e->value * DEFAULT_AXIS_STEP_DISTANCE);
break;
default:
break;
}
break;
case REL_HWHEEL:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
evdev_flush_pending_event(device, time);
switch (e->value) {
case -1:
/* Scroll left */
case 1:
/* Scroll right */
notify_axis(device->seat,
time,
WL_POINTER_AXIS_HORIZONTAL_SCROLL,
e->value * DEFAULT_AXIS_STEP_DISTANCE);
break;
default:
break;
}
}
}
static inline void
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
evdev_process_absolute(struct evdev_device *device,
struct input_event *e,
uint32_t time)
{
if (device->is_mt) {
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
evdev_process_touch(device, e, time);
} else {
evdev_process_absolute_motion(device, e);
}
}
static void
fallback_process(struct evdev_dispatch *dispatch,
struct evdev_device *device,
struct input_event *event,
uint32_t time)
{
switch (event->type) {
case EV_REL:
evdev_process_relative(device, event, time);
break;
case EV_ABS:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
evdev_process_absolute(device, event, time);
break;
case EV_KEY:
evdev_process_key(device, event, time);
break;
case EV_SYN:
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
evdev_flush_pending_event(device, time);
break;
}
}
static void
fallback_destroy(struct evdev_dispatch *dispatch)
{
free(dispatch);
}
struct evdev_dispatch_interface fallback_interface = {
fallback_process,
fallback_destroy
};
static struct evdev_dispatch *
fallback_dispatch_create(void)
{
struct evdev_dispatch *dispatch = malloc(sizeof *dispatch);
if (dispatch == NULL)
return NULL;
dispatch->interface = &fallback_interface;
return dispatch;
}
static void
evdev_process_events(struct evdev_device *device,
struct input_event *ev, int count)
{
struct evdev_dispatch *dispatch = device->dispatch;
struct input_event *e, *end;
uint32_t time = 0;
e = ev;
end = e + count;
for (e = ev; e < end; e++) {
time = e->time.tv_sec * 1000 + e->time.tv_usec / 1000;
dispatch->interface->process(dispatch, device, e, time);
}
}
static int
evdev_device_data(int fd, uint32_t mask, void *data)
{
struct weston_compositor *ec;
struct evdev_device *device = data;
struct input_event ev[32];
int len;
ec = device->seat->compositor;
if (!ec->session_active)
return 1;
/* If the compositor is repainting, this function is called only once
* per frame and we have to process all the events available on the
* fd, otherwise there will be input lag. */
do {
if (device->mtdev)
len = mtdev_get(device->mtdev, fd, ev,
ARRAY_LENGTH(ev)) *
sizeof (struct input_event);
else
len = read(fd, &ev, sizeof ev);
if (len < 0 || len % sizeof ev[0] != 0) {
if (len < 0 && errno != EAGAIN && errno != EINTR) {
weston_log("device %s died\n",
device->devnode);
wl_event_source_remove(device->source);
device->source = NULL;
}
return 1;
}
evdev_process_events(device, ev, len / sizeof ev[0]);
} while (len > 0);
return 1;
}
static int
evdev_configure_device(struct evdev_device *device)
{
struct input_absinfo absinfo;
unsigned long ev_bits[NBITS(EV_MAX)];
unsigned long abs_bits[NBITS(ABS_MAX)];
unsigned long rel_bits[NBITS(REL_MAX)];
unsigned long key_bits[NBITS(KEY_MAX)];
int has_abs, has_rel, has_mt;
int has_button, has_keyboard, has_touch;
unsigned int i;
has_rel = 0;
has_abs = 0;
has_mt = 0;
has_button = 0;
has_keyboard = 0;
has_touch = 0;
ioctl(device->fd, EVIOCGBIT(0, sizeof(ev_bits)), ev_bits);
if (TEST_BIT(ev_bits, EV_ABS)) {
ioctl(device->fd, EVIOCGBIT(EV_ABS, sizeof(abs_bits)),
abs_bits);
if (TEST_BIT(abs_bits, ABS_X)) {
ioctl(device->fd, EVIOCGABS(ABS_X), &absinfo);
device->abs.min_x = absinfo.minimum;
device->abs.max_x = absinfo.maximum;
has_abs = 1;
}
if (TEST_BIT(abs_bits, ABS_Y)) {
ioctl(device->fd, EVIOCGABS(ABS_Y), &absinfo);
device->abs.min_y = absinfo.minimum;
device->abs.max_y = absinfo.maximum;
has_abs = 1;
}
/* We only handle the slotted Protocol B in weston.
Devices with ABS_MT_POSITION_* but not ABS_MT_SLOT
require mtdev for conversion. */
if (TEST_BIT(abs_bits, ABS_MT_POSITION_X) &&
TEST_BIT(abs_bits, ABS_MT_POSITION_Y)) {
ioctl(device->fd, EVIOCGABS(ABS_MT_POSITION_X),
&absinfo);
device->abs.min_x = absinfo.minimum;
device->abs.max_x = absinfo.maximum;
ioctl(device->fd, EVIOCGABS(ABS_MT_POSITION_Y),
&absinfo);
device->abs.min_y = absinfo.minimum;
device->abs.max_y = absinfo.maximum;
device->is_mt = 1;
has_touch = 1;
has_mt = 1;
if (!TEST_BIT(abs_bits, ABS_MT_SLOT)) {
device->mtdev = mtdev_new_open(device->fd);
if (!device->mtdev) {
weston_log("mtdev required but failed to open for %s\n",
device->devnode);
return 0;
}
device->mt.slot = device->mtdev->caps.slot.value;
} else {
ioctl(device->fd, EVIOCGABS(ABS_MT_SLOT),
&absinfo);
device->mt.slot = absinfo.value;
}
}
}
if (TEST_BIT(ev_bits, EV_REL)) {
ioctl(device->fd, EVIOCGBIT(EV_REL, sizeof(rel_bits)),
rel_bits);
if (TEST_BIT(rel_bits, REL_X) || TEST_BIT(rel_bits, REL_Y))
has_rel = 1;
}
if (TEST_BIT(ev_bits, EV_KEY)) {
ioctl(device->fd, EVIOCGBIT(EV_KEY, sizeof(key_bits)),
key_bits);
if (TEST_BIT(key_bits, BTN_TOOL_FINGER) &&
!TEST_BIT(key_bits, BTN_TOOL_PEN) &&
(has_abs || has_mt)) {
device->dispatch = evdev_touchpad_create(device);
weston_log("input device %s, %s is a touchpad\n",
device->devname, device->devnode);
}
for (i = KEY_ESC; i < KEY_MAX; i++) {
if (i >= BTN_MISC && i < KEY_OK)
continue;
if (TEST_BIT(key_bits, i)) {
has_keyboard = 1;
break;
}
}
if (TEST_BIT(key_bits, BTN_TOUCH))
has_touch = 1;
for (i = BTN_MISC; i < BTN_JOYSTICK; i++) {
if (TEST_BIT(key_bits, i)) {
has_button = 1;
break;
}
}
}
if (TEST_BIT(ev_bits, EV_LED))
has_keyboard = 1;
if ((has_abs || has_rel) && has_button) {
weston_seat_init_pointer(device->seat);
device->seat_caps |= EVDEV_SEAT_POINTER;
weston_log("input device %s, %s is a pointer caps =%s%s%s\n",
device->devname, device->devnode,
has_abs ? " absolute-motion" : "",
has_rel ? " relative-motion": "",
has_button ? " button" : "");
}
if (has_keyboard) {
if (weston_seat_init_keyboard(device->seat, NULL) < 0)
return -1;
device->seat_caps |= EVDEV_SEAT_KEYBOARD;
weston_log("input device %s, %s is a keyboard\n",
device->devname, device->devnode);
}
if (has_touch && !has_button) {
weston_seat_init_touch(device->seat);
device->seat_caps |= EVDEV_SEAT_TOUCH;
weston_log("input device %s, %s is a touch device\n",
device->devname, device->devnode);
}
return 0;
}
struct evdev_device *
evdev_device_create(struct weston_seat *seat, const char *path, int device_fd)
{
struct evdev_device *device;
struct weston_compositor *ec;
char devname[256] = "unknown";
device = zalloc(sizeof *device);
if (device == NULL)
return NULL;
ec = seat->compositor;
device->output =
container_of(ec->output_list.next, struct weston_output, link);
device->seat = seat;
device->seat_caps = 0;
device->is_mt = 0;
device->mtdev = NULL;
device->devnode = strdup(path);
device->mt.slot = -1;
device->rel.dx = 0;
device->rel.dy = 0;
device->dispatch = NULL;
device->fd = device_fd;
evdev: Only track one pending event Instead of having a mask of pending events there is now an enum with a single value to represent the one pending event. The event gets flushed explicitly as part of the handling code for each event type rather than in the outer event reading loop. The pending event is used so that we can combine multiple motion events into one and to make sure that we have recieved the latest position before sending a touch up or down event. This should fix the following problems with the old approach: • If you release a finger and press it down again quickly you could get the up and down events in the same batch. However the pending events were always processed in the order down then up so it would end up notifying two down events and then an up. The pending event is now always flushed when there is a new up or down event so they will always be in the right order. • When it got a slot event it would immediately change the slot number and then set the pending event. Then when it flushed the events it would use the new slot number to flush the old pending event so the events could have the wrong finger. The pending event is now immediately flushed when a slot event is received so it will have the right finger. • If you get more than 32 events in one read then it was resetting the pending events before processing the next batch in evdev_process_events. If four fingers were pressed down at once then it ended up with more than 32 events and the sync message would be in the second batch. The pending flag for the last finger was getting cleared so it never got emitted. In this patch the pending event is no longer reset after reading nor is it explicitly flushed. Instead it is flushed when we receive a EV_SYN event or a different pending event needs to replace it. The touchpad handling code was trying to use the pending event mechanism to notify the relative motion events. I'm not sure why it was doing this because it looks the event would effectively get emitted as soon as the touchpad_process function is finished anyway and it wasn't accumulating the values. Instead I've just changed it to emit the event directly. https://bugs.freedesktop.org/show_bug.cgi?id=67563
11 years ago
device->pending_event = EVDEV_NONE;
wl_list_init(&device->link);
ioctl(device->fd, EVIOCGNAME(sizeof(devname)), devname);
devname[sizeof(devname) - 1] = '\0';
device->devname = strdup(devname);
if (evdev_configure_device(device) == -1)
goto err;
if (device->seat_caps == 0) {
evdev_device_destroy(device);
return EVDEV_UNHANDLED_DEVICE;
}
/* If the dispatch was not set up use the fallback. */
if (device->dispatch == NULL)
device->dispatch = fallback_dispatch_create();
if (device->dispatch == NULL)
goto err;
device->source = wl_event_loop_add_fd(ec->input_loop, device->fd,
WL_EVENT_READABLE,
evdev_device_data, device);
if (device->source == NULL)
goto err;
return device;
err:
evdev_device_destroy(device);
return NULL;
}
void
evdev_device_destroy(struct evdev_device *device)
{
struct evdev_dispatch *dispatch;
if (device->seat_caps & EVDEV_SEAT_POINTER)
weston_seat_release_pointer(device->seat);
if (device->seat_caps & EVDEV_SEAT_KEYBOARD)
weston_seat_release_keyboard(device->seat);
if (device->seat_caps & EVDEV_SEAT_TOUCH)
weston_seat_release_touch(device->seat);
dispatch = device->dispatch;
if (dispatch)
dispatch->interface->destroy(dispatch);
if (device->source)
wl_event_source_remove(device->source);
wl_list_remove(&device->link);
if (device->mtdev)
mtdev_close_delete(device->mtdev);
close(device->fd);
free(device->devname);
free(device->devnode);
free(device->output_name);
free(device);
}
void
evdev_notify_keyboard_focus(struct weston_seat *seat,
struct wl_list *evdev_devices)
{
struct evdev_device *device;
struct wl_array keys;
unsigned int i, set;
char evdev_keys[(KEY_CNT + 7) / 8];
char all_keys[(KEY_CNT + 7) / 8];
uint32_t *k;
int ret;
if (!seat->keyboard_device_count > 0)
return;
memset(all_keys, 0, sizeof all_keys);
wl_list_for_each(device, evdev_devices, link) {
memset(evdev_keys, 0, sizeof evdev_keys);
ret = ioctl(device->fd,
EVIOCGKEY(sizeof evdev_keys), evdev_keys);
if (ret < 0) {
weston_log("failed to get keys for device %s\n",
device->devnode);
continue;
}
for (i = 0; i < ARRAY_LENGTH(evdev_keys); i++)
all_keys[i] |= evdev_keys[i];
}
wl_array_init(&keys);
for (i = 0; i < KEY_CNT; i++) {
set = all_keys[i >> 3] & (1 << (i & 7));
if (set) {
k = wl_array_add(&keys, sizeof *k);
*k = i;
}
}
notify_keyboard_focus_in(seat, &keys, STATE_UPDATE_AUTOMATIC);
wl_array_release(&keys);
}