It just return the first screen found in screen list.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The required version only corresponds to version of mesa implementation.
This mesa version requirement causes configure errors,
when weston is configured for a different egl implementation than mesa.
Because the version of the egl drivers are not alligned
to the mesa version.
Therefore, I deleted the version controlling for egl,
so that weston can be configured for a different egl implementation.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
commit 57388e44e5 accidentally changed the comment in
compositor.c::subsurface_commit_to_cache
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
If we pass negative height or width on to pixman we get error messages
in the log.
Also, if width or height is 0, there's no damage, so we can early return
for that too.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Make sure a view's transform is viable for a cursor plane and
then actually apply it before setting the cursor plane location.
Now if a subsurface ends up in the cursor plane, the plane will be
properly positioned.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
when weston is running on qemux86 device, there is an error with following.
[08:02:07.897] launching '/usr/lib/weston/weston-ivi-shell-user-interface'
[08:02:08.201] /usr/lib/weston/weston-ivi-shell-user-interface died on signal 11
this is caused by type mismatch, and
it does occur on qemux86-64
Signed-off-by: Yong-iL Joh <yong-il.joh@windriver.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This variable may have been used previously when evdev.c was used
however that functionality seems to have been consumed by libinput, so
there is no need for this variable in the weston_seat structure anymore.
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
We're going to use this to replace much of the other transform code so
it's no longer just relevant to pixman-renderer.c
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
[Pekka: add the warning about matrix restrictions]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Pekka: added the comment for the function]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It's just a direct call to wl_surface_damage() anyway, and the only
caller no longer exists.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We're going to post damage when the widget redraw happens anyway.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Keep all per client wl_pointer resources in a new struct called
'weston_pointer_client'. When focus changes, instead of moving a list
of resources between different lists, just change the focused pointer
client.
The intention with this is to make it easier to add wl_pointer
extensions that share the same focus as the corresponding wl_pointer.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of only passing absolute pointer coordinates, effectively
loosing motion event data, pass a struct that can potentially contain
different types of motion events, currently being absolute and relative.
A helper function to get resulting absolute coordinates was added for
when previous callbacks simply used the (x, y) coordinates.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
The DTD requires elements in certain order, scanner itself doesn't.
Anyway, fix the warning with a simple reordering to match how all other
protocols are written.
Fixes:
protocol:107: element request: validity error : Element request content
does not follow the DTD, expecting (description? , arg*), got (arg
description )
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It doesn't fill a useful function and is not intended to be continued.
If there is need for workspace manipulation from clients a protocol
based on those future needs need to be properly designed.
workspaces.xml is probably not very relevant since it did the bare
minimum.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Due to the effort of moving a way from non-prefixed protocols, rename
the weston specific screenshooter protocol to weston_screenshooter.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In the effort of going away from generic names of protocols only
relevant for weston, rename the weston desktop shell
weston_desktop_shell.
This also resets the version to 1, as there will be no prior versions
to weston_desktop_shell.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Use the fullscreen-shell protocol XML from the wayland-protocols
installation, and remove the one we provide ourself.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Also rename focus to has_focus to be slightly less confusing.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
When no X11 headers are present eglplatform.h will break unless
certain defines are set prior to its inclusion.
including wayland-egl.h defines WL_EGL_PLATFORM which will stop
the attempted inclusion of the X11 headers.
Maybe this isn't the best solution to the problem, but it's harmless
and gets the job done.
Closes bug: https://bugs.freedesktop.org/show_bug.cgi?id=92104
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
(patch by Ahmet Acar, commit log by Derek Foreman)
mmap() function expects to be passed a void pointer as the address
here. Passing NULL is technically more correct than passing 0.
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
commit e76f185 stopped using visuals with "native visual id" == 0
This broke some systems, so we now try 0 as a worst case fallback if
everything else has failed.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Don't only send motions and buttons but also axis events through the
pointer grab interface.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
When trying to do sceen recording using the screenshooter, no screen data
was ever processed because the rpi-renderer never set the previous frames
damage area.
Update the rpi-renderer to copy the necessary data.
Signed-off-by: Shinya Saito <ssaito@igel.co.jp>
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The name of ivi_controller_interface is changed to ivi_layout_interface
with this patch.
This name is better suited to the interface, because it is implemented
in ivi-layout.c and its methods are linked to ivi_layout* functions.
Furthermore, the controller modules (e.g. hmi-controller) are the users
of this interface and they have their own interfaces,
which are called *_controller_interface,
e.g.: ivi_hmi_controller_interface.
This causes confusion about the software architecture.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
In preparation for further refactoring. This patch also removes a
redundant NULL check. Since we pass views, and views will always have an
associated surface, there is no point of checking if it has.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Add new configuration argument to the backend_init() function, which
will replace the current argc, argv, and config arguments.
After each backend is converted individually the unused parameters
will be removed.
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This commit introduces the structs weston_backend_config and
weston_backend_output_config, to prepare for the new config
system for the backends.
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Instead of using the implicit name 'data', changed the test
with fixture macro ZUC_TEST_F() to use an additional value
to explicitly set the name to use for test data from the
fixture.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
* Clarify documentation on ZUC_ASSERT_* behavior in regards to return
vs. abort()
* Added overview section on return behavior.
* Fixed spelling
* Removed outdated reference to tap function.
Changes since v1:
* Incorporated grammatical feedback.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
We discard motion outside the window on the assumption it's from before
some event that caused the window to shrink. However, if we have a grab
it's likely that this motion is actually from dragging from the inside
of the window out.
This fixes a problem where drag selecting in weston terminal behaves
oddly - it doesn't update the select region while the drag is happening
outside the window.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
If we're going to ignore motion below and to the right when coming
out of maximize, we should probably also ignore it above and to
the left.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Nobuhiko Tanibata
Ucan, Emre (ADITG/SW1)
Chris Michael
Derek Foreman
Jonas Ådahl
Yong-iL Joh
Bryce Harrington
Jason Ekstrand
Pekka Paalanen
Peter Hutterer
Ahmet Acar
Shinya Saito
Giulio Camuffo
Jon Cruz