gl_rendererer's output_create has a lot of arguments now. Add a
structure for the options to make it more clear what is what.
This is in preparation for adding bare-integer arguments which are ripe
for confusion when passing positional arguments.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This is to put more of the EGL client extension handling in the same
place. This also adds a boolean to check if EGL_EXT_platform_base is
supported, similar to other extensions we check.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
EGL client extensions are not tied to the EGLDisplay we create, and have
an effect on how we create the EGLDisplay. Since we're using this to
look for EGL_EXT_platform_base, it makes more sense for this to be near
the start of the GL renderer initialization.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
If gl-renderer fails its initialisation, we return to compositor
teardown, which will try to free the renderer if ec->renderer was set.
This is unfortunate when we've already torn it down whilst failing
gl-renderer init, so just clear the renderer member so we don't try to
tear down twice.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Emil Velikov <emil.velikov@collabora.com>
Commit adaf8c7410 ("renderer: change frame_signal emission to pass
previous_damage as data argument") missed updating all frame_signal
emissions. Later commit 2619bfe420 ("move frame_signal emission to
weston_output_repaint()") fixed this deficency along with moving the
location of the emission. Due to an issue of the location change, this
commit had to be reverted again.
This makes sure that the pixman as well as the GL renderer now also
emits the damage region instead of the Weston output.
Fixes: adaf8c7410 ("renderer: change frame_signal emission to pass previous_damage as data argument")
Signed-off-by: Stefan Agner <stefan@agner.ch>
The member previous_damage from struct weston_output is no longer necessary.
First, stop calling init, fini and copying output_damage to it. Then remove
it from struct weston_output.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
The emission of frame_signal has to happen before a flip, otherwise
glReadPixels() could read an old frame or even worse an uninitialized buffer.
So move frame_signal emission back to renderers.
This reverts commit 2619bfe420.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
In order to remove duplication and make the code easier to follow, move
frame_signal emission from renderers to weston_output_repaint(). This should
have no observable effect.
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Accept XYUV dmabuf buffers that a client application such as
weston-simple-dmabuf-v4l might submit.
v2 (Daniel):
Add XYUV to yuv_formats array to have the compositor color convert
with a shader if GL_TEXTURE_EXTERNAL_OES does not work.
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Instead of using the EGL_*_WL macros imported from EGL headers,
start using enums that would be defined locally. This is needed as
there are limited number of macros defined in EGL headers and
adding new ones is not practically feasible when adding a new
texture type. (suggested by Daniel Stone)
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
As we avoid importing the buffer in the GPU, when attaching the buffer
we'll not have a valid image to retrieve it from, and as such we'll
avoid touching and setting the surface state shader.
This adds also 'direct_display' to the surface state and with it, sets the
surface state 'direct_display' member whenever the imported buffer will
have the direct-display member set.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
In the future libweston will stop providing it for its users, since it's not
part of libweston API.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We have two kinds of libweston users: internal and external. Weston, the
frontend, counts as an external user, and should not have access to libweston
private headers. The shell plugins are external users as well, because we
intend people to be able to write them. Renderers, backends, and some plugins
are internal users who will need access to private headers.
Create two different Meson dependency objects, one for each kind.
This makes it less likely to accidentally use a private header.
Screen-share is a Weston plugin and therefore counts as an external user, but
it needs the backend API to deliver input. Until we are comfortable exposing
public API for that purpose, let it use internal headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
With the timeline scope being created it is time to convert TL_POINT()
to use the timeline scope through the compositor instance.
This patch removes the global variable allowing to run the new timeline
code.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
With it this removes the parts responsible for creating the file,
timeline_log class, removes the debug key binding when creating the
compositor instace, keeping only what can be re-used.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Use the surfaceless platform in the headless backend to initialize the
GL-renderer and create pbuffer outputs. This allows headless backend to use
GL-renderer, even hardware accelerated.
This paves way for exercising GL-renderer in CI and using the Weston test suite
to test hardware GL ES implementations.
Relates to: https://gitlab.freedesktop.org/wayland/weston/issues/278
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This allows passing EGL_PLATFORM_SURFACELESS_MESA to
gl_renderer_display_create(). It is not useful on its own, because the
surfaceless platform has no window surfaces.
This feature will be used by the headless backend.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In case the base EGLConfig is needed, gl_renderer_display_create() needs to
know it should use EGL_WINDOW_BIT or EGL_PBUFFER_BIT.
The PBUFFER case is added for when the headless backend will grow GL-renderer
support.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Define common_inc which includes both public_inc and the project root directory.
The project root directory will allow access to config.h and all the shared/
headers.
Replacing all custom '.', '..', '../..', '../shared' etc. include paths with
common_inc reduces clutter in the target definitions and enforces the common
#include directive style, as e.g. including shared/ headers without the
subdirectory name no longer works.
Unfortunately this does not prevent one from using private libweston headers
with the usual include pattern for public headers.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
When all shared/ headers are included in the same way, we can drop unnecessary
include seach paths from the compiler.
This include style was chosen because it is prevalent in the code base. Doing
anything different would have been a bigger patch.
This also means that we need to keep the project root directory in the include
search path, which means that one could accidentally include private headers
with
#include "libweston/dbus.h"
or even
#include <libweston/dbus.h>
IMO such problem is smaller than the churn caused by any of the alternatives,
and we should be able to catch those in review. We might even be able to catch
those with grep in CI if necessary.
The "bad" include style was found with:
$ for h in shared/*.h; do git grep -F $(basename $h); done | grep -vF '"shared/'
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace the old config printer with the new fancy one: less duplicate code,
more details logged.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Print details of all available EGLConfigs in case none match what we are
looking for. This helps debugging.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If configless_context is not supported, we pick one EGLConfig as the "base
config" because we have just one GL context and different configs between the
context and EGLSurfaces might not work. Until now, we did not actually make
sure to pick the base config.
If the base config matches the requirements, prefer it. Only if it doesn't
match, go looking for another config.
This should give better chances of success on systems where configless_context
is not supported by relying less on eglChooseConfig().
Cc: Madhurkiran Harikrishnan <madhurkiran.harikrishnan@xilinx.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If we don't have the surfaceless_context extension, we create a pbuffer as a
dummy surface to work with. If we also don't have configless_context, then it
is possible the config used for creating the context does not support pbuffers.
Therefore, if both conditions apply, we need to pick a config that supports
both window and pbuffer surfaces.
This makes the "base" config compatible, but it does not yet guarantee that we
actually pick it again when creating the pbuffer surface. Fixing that is
another patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Fold more code into the common config choosing, the pbuffer path this time.
Simplifies code and allows gl_renderer_get_egl_config() to grow smarter in the
future to guarantee config compatility in the absence of configless_context
extension.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that all backends pass in a list of acceptable DRM formats, that is used to
determine if the EGLConfig has an alpha channel or not. Therefore the
opaque_attribs and alpha_attribs are now useless, and we can remove the whole
config_attribs argument from the API.
gl_renderer_get_egl_config() uses an internal attrib list that matches at least
the union of the opaque_attribs and alpha_attribs matches.
Overall, behaviour should remain unchanged.
The new attribute array becomes variable in the future, so it is left
non-const.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Implement fuzzy EGLConfig pixel format matching, where we ensure that R, G, B
and A channels have the expected number of bits exactly. This is used on EGL
platforms where the EGLConfig native visual ID is not a DRM format code. On EGL
GBM platform, the old exact matching of native visual ID is kept.
As only the DRM backend uses a DRM format list for picking a config, this patch
should not change any behaviour.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Using arrays of pixel_format_info instead of just DRM format codes is useful
for fuzzy matching of formats with EGLConfigs in the future. The immediate
benefit is that we can easily print format names in log messages.
We should never deal with formats we don't have in our database, so discarding
unknown formats should be ok. Using unknown formats would become hard later,
too.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If configless context is supported, we can skip choosing the "base" config
completely as it will never be used.
This simplifies the code a little bit.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace a direct call to egl_choose_config() with a higher level function
gl_renderer_get_egl_config(). This will make follow-up work easier when
attribute lists will be generated inside gl_renderer_get_egl_config() instead
of passed in as is.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In an attempt to pull more of EGLConfig choosing into one place, refactor code
into the new gl_renderer_get_egl_config(). The purpose of this function is to
find an EGL config that not only satisfies the requested attributes and the
pixel formats if given but also makes sure the config is generally compatible
with the single GL context we have.
All this was already checked in gl_renderer_create_window_surface(), but
gl_renderer_create_pbuffer_surface() is still missing it. This patch is
preparation for fixing the pbuffer path.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Start a new source file for EGL glue stuff, for the EGL platform Weston runs
on. gl-renderer.c is getting too long, and I want to add even more boring code
(config pretty-printing etc.).
This pure code move, no changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Some extensions (such as EGL_KHR_partial_update) add functions to EGL.
When the extension is present, GetProcAddress must return usable
function pointers for those entrypoints.
Assert that GetProcAddress returns a non-NULL function pointer in these
cases.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Some drivers support EGL_EXT_image_dma_buf_import_modifiers for format
enumeration, but don't have any modifiers. In this case, on platforms where
malloc(0) returns non-NULL, we would leak that allocation to the caller.
Handle this by noticing when the number of supported modifiers is 0 and
returning early.
No caller ever used anything but NULL here, so just use NULL to simplify code.
In fact, no EGL platform defined today even defines any platform attributes
except the X11 platform for choosing a non-default SCREEN.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This became unused in:
commit e77f8ad79b
Author: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Date: Wed Jun 8 17:39:37 2016 +0300
compositor-fbdev: drop EGL support
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Contents on an ouput are captured when screenshooter/recorder/screen
sharing is enabled. In such cases the protected content must
be censored to ensure that it is not recorded along with unprotected
content. This is a required only when the surface protection is in
enforced mode.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Introduce a new private header file that only internal backends are
allowed to use. Starts by migrating functions that operate on the
'struct weston_head'.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Daniel Stone
Scott Anderson
Stefan Agner
Leandro Ribeiro
Vivek Kasireddy
Marius Vlad
Eero Tamminen
Pekka Paalanen
Adam Jackson
Harish Krupo