This value is always `NULL`.
Silences:
`warning: ‘%s’ directive argument is null [-Wformat-overflow=]`
Signed-off-by: Robert Mader <robert.mader@collabora.com>
clang-13 complains about bitwise xor assigments like the following:
../libweston/noop-renderer.c:62:25: warning: variable 'unused' set but
not used [-Wunused-but-set-variable] volatile unsigned char unused = 0;
Use the __attribute__((unused)) instead.
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Similar to how we do it with drm_fb ref counts, increase a reference
count and return the same object.
Plug-in in desktop-shell when we map up the view in order to survive a
weston_surface destruction.
Astute readers will notice that this patch removes weston_view_destroy()
while keeping the balance between removing and adding a
weston_surface_unref() call in desktop_shell_destroy_surface().
The reason is to let weston_surface_unref() handle destruction on its
own. If multiple references are taken, then weston_surface_unref()
doesn't destroy the view, it just decreases the reference, with
a latter call to weston_surface_unref() to determine if the view
should be destroyed as well. This situation happens if we have
close animation enabled, were we have more than one reference taken: one
when mapping the view/surface and when when the surface itself was created,
(what we call, a weak reference).
If only a single reference is taken (for instance if we don't have close
animations enabled) then this weston_surface_unref()
call is inert as that reference is not set-up, leaving libweston to
handle the view destruction.
Following that with a weston_view_destroy() explicit call would cause a
UAF as the view was previous destroyed by a weston_surface_unref() call.
A side-effect of not keeping the weston_view_destroy() call would
happen when tearing down the compositor. If close animations are enabled,
weston_surface_unref() would not destroy the view, and because
weston_view_destroy() no longer exists, we would still have the
view in the other layers by the time we check-up if layers
have views present.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Calling weston_surface_unref() one time too many could be a sign we
haven't correctly increased the ref count for it.
Also, if we don't have a surface being passed, do no attempt to
use it.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Make it obvious that weston_surface has a reference counting happening
and destruction of the weston_surface happens when the last
weston_surface reference has been accounted for.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Unconditionally creating a surface feedback for each surface
creates unnecessary overhead and noise in the logs. Thus
create it when the first surface feedback resource for a
surface is requested and delete it again once all those
resources have been destroyed.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
To me, the use of setup_search_param() makes the code harder to
understand than it needs to be. Replacing that function with open-coding
the struct cmlcms_color_transform_search_param initialization makes it
more clear that:
- get_surface_color_transform is the only one that actually uses a
surface to initialize it
- get_blend_to_output does not use an input profile at all
- get_sRGB_to_output and get_sRGB_to_blend hardcode the sRGB profile
like they should
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
I am going to need to add yet another output property to be set by a
color manager: HDR Static Metadata Type 1. With the old color manager
API design, I would have needed to add the fourth function pointer to be
called always in the same group as the previous three. This seemed more
convoluted than it needs to be.
Therefore collapse the three existing function pointers in the API into
just one that is resposible for setting up all three things.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This new struct collects all the things that a color manager needs to
set up when any colorimetry aspect of an output changes. The intention
is to make the color manager API less verbose.
In this first step, the new struct is added and replaces the fields in
weston_output.
The intention is for the following color manager API changes to
dynamically allocate this structure. Unfortunately, until that actually
happens, we need a temporary way to allocate it. That is
weston_output::colorout_, which will be removed in the next patch. This
keeps the patches more palatable for review at the cost of some
back-and-forth in code changes.
This is a pure refactoring, no functional changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Trying to do HDR with XRGB8888 is a bit like using RGB565 on SDR: you
get visible color quantization and banding in gradients (without dithering
which Weston does not implement yet, and might not work too well for HDR
anyway).
Therefore, on any HDR mode, default output framebuffer format to 10 bpc
instead of 8 bpc.
Ideally we'd also optionally try 16F or 16 bpc formats, but automatic
fallbacks for those are more complicated to arrange. You can still
configure 16F or 16 bpc manually.
This patch also moves the default format setting from
drm_output_set_gbm_format() to drm_output_enable(), because setting the
default now requires eotf_mode. Frontends may call set_gbm_format()
first and set eotf_mode next. This does create an awkward situation for
outputs that a frontend disables and re-enables. This patch here makes
sure that the old output configuration remains, but changing eotf_mode
may not change the default format. One needs to call
set_gbm_format(NULL) to re-evaluate the default format. Resetting the
format on drm_output_deinit() would lose the current setting.
DRM_FORMAT_INVALID was introduced in libdrm 2.4.95 which we already
hard-depend on.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Program the connector property HDR_OUTPUT_METADATA based on the EOTF
mode of the output.
For now, this changes only the EOTF. The colorimetry and luminance are
left undefined, to be filled in by later patches. This should still be
enough to put a video sink into HDR mode, albeit the response is
probably unknown.
drm_output keeps track of the currently existing blob id. If the blob
contents need to be re-created, this blob would be destroyed and the
field set to zero. In this patch, there is no provision for runtime
changing of HDR metadata, so there is no code doing that.
Destroying the blob at arbitrary times is not a problem, because the
kernel keeps a reference to the data as long as the blob id remains with
KMS.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Check whether HDR_OUTPUT_METADATA property exists on a KMS connector. If
yes, pretend that EDID claims support for all EOTF modes and update the
head supported EOTFs mask accordingly. If not, then only SDR is
possible.
Parsing EDID to take monitor capabilities into account is left for
later.
HDR mode cannot be set without HDR_OUTPUT_METADATA.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These are fallback definitions in case libdrm is not new enough.
They are copied from libdrm 2.4.107.
struct hdr_output_metadata defines the contents of the blob to be used
with the connector property "HDR_OUTPUT_METADATA".
This is needed for programming a HDR mode in KMS.
This headers need to be excluded from Doxygen, because Doxygen chokes on
the kerneldoc markup.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
A reminder that this variable needs to be taken into account when
crafting color transformations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The no-op color manager will not support any other EOTF mode than SDR.
Other modes would require it to set up color transformations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The headless backend does not display to anything, so it doesn't care
what the EOTF mode is. To allow testing compositor internal behavior,
claim to support all EOTF modes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is the switch to turn HDR mode on.
The values in the enumeration come straight from CTA-861-G standard.
Monitors advertise support for some of the HDR modes in their EDID, and
I am not aware of any other way to detect if a HDR mode actually works
or not. Different monitors may support different and multiple modes.
Different modes may look different. Therefore the high-level choice of
how to drive a HDR video sink is left for the Weston frontend to decide.
All the details like what HDR metadata to use are left for the color
manager.
This commit adds the libweston API for backends to advertise support and
for frontends to choose a mode. Backend and frontend implementations
follow in other commits.
The frontend API does not limit the EOTF mode to the supported ones to
allow experimentation and overriding EDID.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Even if the weston_buffer_reference is still alive in situations like
when we have closing animations, the underyling buffer (wl_shm_buffer)
is no longer available. Call the appropriate destroy handler to
invalidate the pixman image and avoid touch the shm_buffer.
Fixes: #613
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Synchronize events carry keylock status, so we should update it.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
When RDP indicates that a Japanese keyboard layout is used without
a Japanese 106/109 keyboard (keyboard type 7), use the "us" layout,
since the "jp" layout in xkb expects the Japanese 106/109 keyboard
layout.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Korean keyboards are keyboard type 8:
https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-getkeyboardtype
While type 8 is not explicitly mentioned in the RDP documentation,
it can be sent over the wire. Let's support the variants we can.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
This code will eventually be used by RAIL as well, so let's
split it out now.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Use the common abnt2 variant, instead of the niche nativo one.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We move this into a function for when we add horizontal wheel support
later.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We currently hardcode a 60Hz update rate for the rdp backend.
In some cases it may be useful to override this to increase the rate
for a faster monitor, or to decrease it to reduce network traffic.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Instead of hard coding a 16ms refresh interval, use the refresh rate
from the current mode to determine when the next frame should be.
Currently, we still hard code the refresh rate, so this will end up
with roughly the same value we've been using, but in the future
we'll allow setting it via command line.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We already have a way for a single RDP client connection to be
passed from a parent process to a child using a combination
of environment variable (RDP_FD) and env var (--env-socket)
This patch allows a bound socket fd (as opposed to a client
connection) to be established in a parent process and provided
to the rdp backend. WSLg uses this to set up an AF_VSOCK
socket for communication between a Windows RDP client and a
weston compositor running under a hypervisor.
Co-authored-by: Hideyuki Nagase <hideyukn@microsoft.com>
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
These events carry the 4th and 5th mouse buttons, so
we should propagate them. We also need to use pointer
frames to ensure the buttons are properly paired with
the pointer co-ordinates.
Unfortunately, there is no way in RDP to determine if
a mouse event and an extended mouse event should be in
the same pointer frame, so this is the best we can do.
We also enable extended mouse events so they'll be used.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
Rather than punching through to set the surface as a solid colour,
attach an actual weston_buffer to it instead.
This becomes the first user of attaching non-client-generated buffers
to a weston_surface. As a result, it is necessary to introduce a
function which will allow compositors and shells to attach a buffer to a
surface. weston_surface_attach_solid() is therefore introduced as a
special-purpose helper which will attach a solid buffer to a
weston_surface.
It is not intended as a general-purpose mechanism to allow compositors
to attach client-generated buffers to surfaces, as doing so would have
unknown effects on this core part of the compositor itself.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we're checking to see if a view is suitable to go on a plane, check
for (and reject) solid-colour buffers.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The Pixman renderer keeps its own reference to buffers when attached to
surfaces, through its surface state: just use that instead.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Refactor the buffer-type check slightly so we can handle solid-color
buffers, which we do exactly nothing with.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently solid-colour displays (e.g. the background for fullscreen
views) is implemented by a special-case weston_surface which has no
buffer attached, with a special punch-through renderer callback to set
the colour.
Replace this with a weston_buffer type explicitly specifying the solid
colour, which helps us eliminate yet more special cases in renderers and
backends.
This is not handled yet in any renderer or backend, however it is also
not used by anything yet. Following commits add support to the renderers
and backends.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When the renderer/backend indicate that they do not need a surface's
buffer content to be preserved, most often because they have copied it,
simply downgrade the buffer reference to 'will not access', rather than
drop the buffer reference altogether.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In the original conception, a weston_buffer_reference indicated that the
underlying contents of the wl_buffer would or could be accessed, so
wl_buffer.release must not be sent until the last reference was
released, as the compositor may still use it.
This meant that renderers or backends which copied the buffer content -
such as the GL renderer with SHM buffers - could only send a buffer
release event to the client by 'losing' the buffer reference altogether.
The main side effect is that `weston-debug scene-graph` could not show
any information at all about SHM buffers when using the GL renderer, but
it also meant that renderers and backends grew increasingly exotic
structures to cache information about the buffer.
Now that we have an additional buffer-reference mode (still referring to
the weston_buffer/wl_buffer, but not going to access its content), we
can allow the weston_buffer_reference and weston_buffer to live as long
as the buffer itself, even if we do send a release event.
This will enable a bunch of backend and renderer deduplication, as well
as finally making scene-graph more useful.
Signed-off-by: Daniel Stone <daniels@collabora.com>