Noticed this while working on primary selection, in the event we run out
of memory when trying to create a new data source, there's a chance
we'll fail on wl_resource_create() and crash from source->resource being
set to NULL.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
output_id_pool is defined as a uint32_t, thus ffs() provides a range of
1-32 available id numbers. When the 33rd output is enabled, Weston will
set the ID to (unsigned)(-1) and thus lead to some unexpected
behaviors.
I'm not sure what the best way to handle this error would be since this
is in an initialization routine, but at least let's document the
potential error condition with an assert().
Allow the binding-modifier option in weston.ini to take a value of
"none", meaning that none of the usual Super+Tab, Super+K, Super+Fn,
etc. key bindings will be enabled.
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Add a new boolean weston.ini option, "allow-zap" to enable or disable
the Ctrl-Alt-Backspace key combination.
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Add a new boolean weston.ini option, "vt-switching" to enable or
disable Ctrl-Alt-Fn key combinations.
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
(Derek Foreman changed the prototype for switch_vt_binding to
have a weston_keyboard * instead of weston_seat *. The pointer
wasn't used, so this is just a warning fix.)
This client opens a V4L2 device, usually exposed as /dev/videoN, and
retrieves its frames as dmabuf for later import into the compositor.
It supports both single- and multi-planar devices, and any format
exposed by the V4L2 device the Wayland compositor accepts.
This client never changes the v4l2 settings, use `v4l2-ctl -c` if you
want to change those.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Derek Foreman <derekf@osg.samsung.com>
Maniphest Tasks: T90
Differential Revision: https://phabricator.freedesktop.org/D339
Those were found while working on simple-dmabuf-v4l, as found in the
next patch of this series.
After each buffer’s params were ready to be submitted to the
compositor, a roundtrip was done, which is wasteful since we can do it
only once after having queued all the params we want. Removing those
nested roundtrips also prevent the potentially dangerous side-effect of
calling callbacks for later events while previous events were still
being processed.
An extraneous surface damage was also removed.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Differential Revision: https://phabricator.freedesktop.org/D344
This client was using an Intel-specific way to allocate a dmabuf, so it
makes sense to have that in its name.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Differential Revision: https://phabricator.freedesktop.org/D342
Namely the single-planar YUYV, the two-planar NV12, and the
three-planar YUV420, using the shaders already present in Weston.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Maniphest Tasks: T13
Differential Revision: https://phabricator.freedesktop.org/D334
This struct serves as renderer data for linux-dmabuf buffers, and can
contain multiple struct egl_image, simplifying this latter in the
common non-dmabuf case.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Differential Revision: https://phabricator.freedesktop.org/D333
The xwm used to automatically send to Xwayland the position of X windows
when that changed, using the x,y of the primary view of the surface.
This works fine for the desktop shell but less so for others.
This patch adds a 'send_position' vfunc to the weston_shell_client that
the shell will call when it wants to let Xwayland know what the position
of a window is.
The logic used by the desktop-shell for that is exactly the same the xwm
used to have.
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: David Fort <contact@hardening-consulting.com>
Currently the fbdev compositor has its own shadow buffer when rendering
with pixman, causing the following copies to occur:
[pixman shadow buffer] -> [fbdev shadow buffer] -> [fbdev hardware]
As the pixman render already does all output translation when
compositing the intermediate shadow buffer really isn't needed, so drop
it.
As a side-effect this fixes updating the fbdev hardware for outputs not
starting at 0x0.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: David FORT <contact@hardening-consulting.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Derek Foreman <derekf@osg.samsung.com>
Fall back to not showing anything as before if we don't have a
compositor with wl_output new enough (version 2 or newer).
Signed-off-by: Jonny Lamb <jonny.lamb@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It shows ivi applications at screensa randomly.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It shows ivi applications in fullscreen per screen like,
The first screen: Application 1,4,5,6,,,,
The seconed screen: Application 2,
The third screen: Application 3
Thie mode assigns one application to each screen at first. And remaind
applications more than screens will be assigned to the first screen.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It shows 2 ivi application in a screen at side-by-side. It moves
additinal application more than 2xN to next screen N+1.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It shows 8 ivi applications in a screen at tiling. It moves additional
application more than 8xN to next screen N+1.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
To locate surfaces of application on multi screens, multi layers are
created baseod on application-layer-id + base-layer-id-offset x N.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A surface ID for layer of background/panel image is set by key: background-id
or panel-id at weston.ini. To support multi screens, it also support offset,
surface-id-offset, to offset the surface ID to next ID for a layer on next
screen.
According to the above key, hmi-controller and ivi-shell-user-interface
who increments the number of screens per notification of wl_output.
crate surface and draw background/panel image on multi surface on screens.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A layer ID for screen is set by key: base-layer-id at weston.ini. To
support multi screens. It also support offset to offset the layer ID
to next ID for next screen.
For example,
base-layer-id=1000
base-layer-id-offset=10000
Layer id for screen 0: 1000
Layer id for screen 1: 11000
Layer id for screen 2: 21000
To support multi screen, create layers for background and panel bar which
located in the below per screens. At the moment, it is only layers.
Surfaces to be created at next patch in the patch set.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- get screens from weston core
- provide screens as internel method
- the iviscn is stored in array inverse order in index.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A weston_surface is transformed to multi screen coordinate, global
coordinate by matrix:m now.
Additionally, a mask needs to be calucated, taking account into,
- multi screen coordination: a destination rectangle of layer in the
coordination is easily calcurated by adding weston_output.{x,y} in
simple. This is because there is no scaled and rotated transformation.
- intersect inside of a screen the layer is assigned to. This is because
overlapped region of weston surface in another screen shall not be
displayed according to ivi use case.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In single screen, the coordinates of layer local coordinates are the
same as global coordinates. However, to support multi screens, the
layer-local coordinates shall be transformed to multi screen coordinates,
which is global coordinates. The abosolute coordinates of a screen in global
stored in (x,y) of output of its weston output so it shall be used to
transform layer-local to global coordinates.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
For multi screen support, ivi_layout_screen to be taken account into
property change in commitChanges.
Property change is now done in update_prop so to consider ivi_screen
property for caluculating transform of weston surface, ivi_layout_screen
is added as a parameter of update_prop.
However, update_prop of weston_view of a ivi_surface can not be done
even if it is set on a screen. The propoerty change shall be done only
when a visibility of ivi_surface or ivi_layer which contains the
ivi_surface is ON. Such a condition shall be checked at commit_changes
as well to avoid calling update_prop, which actually updates
weston_views.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Similar with Desktop shell, set activate to weston surface which is
left-clicked by pointer or touched. This is needed to focus it with a seat.
Without this, a feature who gets activated weston surface by using
weston_surface_get_main_surface doesn't work correctly because it can
not get correct focused weston surface. For example, input-panel uses
weston_surface_get_main_surface to get a weston surface. With this
weston surface, it get a member: output to decide which output shall
show a input-panel, software keyboard. Without activation,
input-panel-ivi can not find a correct output which shows e.g.
weston-editor who uses input-method.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Adds support for touch devices to the wayland backend.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We already have notify_touch(), notify_touch_frame(). We need
notify_touch_cancel() to implement touch in the weston wayland backend
properly.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
We should use wl_*_release when available instead of destroy, and we
should update weston's internal input tracking with weston_seat_releases
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
I'll be using this in a follow up patch that adds touch input to weston's
wayland backend.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Patch updated to remove dead lines as suggested by Daniel Stone
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add a new flag for testing damage in buffer co-ordinates
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add an implementation of wl_surface.damage_buffer, similar to
wl_surface.damage except it uses buffer co-ordinates.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
This allows renderers to use that struct to create their own dmabufs,
in case they can’t import the one provided by the client directly but
know how to convert it into a format they can render.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Differential Revision: https://phabricator.freedesktop.org/D332
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
The function 'weston_surface_to_buffer' is unused by compositor and
clients inside weston, so it should be safe to remove this function
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Rounding both corners of the rectangle down can result in a 0
width/height rectangle before passing to weston_transformed_rect.
This showed up as missing damage in weston-simple-damage (the
bouncing ball would leave green trails when --use-viewport was
used)
Reviewed-by: Daniel Stone <daniels@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
This function is unused throughout the entire weston source tree, so
remove it. It seems that the "load_backend" function is the one
currently being used
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
We've been setting up the viewport by moving the start pointer of the
draw buffer, but later when we want to post damage in buffer co-ordinates
we'll need to keep track of the x,y offsets anyway.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
libwayland-server protects us from invalid serial numbers by
posting an error already.
MIN() is for clients when selecting interface versions.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix a regression introduced by be428b3825
which accidentally removed the global-to-output space conversion.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Derek Foreman <derekf@osg.samsung.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Derek Foreman <derekf@osg.samsung.com>
It breaks from wl_list_for_each of screens when the frist screen found.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is potential bug when it supports several screens. If view_list is
initilized here, the views, which are set by the previous screen, are
cleared. So View list shall be initilized in front of wl_list_for_each
of all screens.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In just previous wl_list_for_each_safe, list of layer in a screen is
cleaned up. And then, the list is re-constructed from
pending.layer_list.
In this re-construction, if order.link of a layer were inserted into a
screen whose number is later one of current screen, the order.link will
inserted into layer_list of two screens. This shall be avoided.
However, if we want to implement a feature to allow a layer to be added
to multiple screens. A layer shall have several order.link per screens.
So, I marked here as TODO.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It just return the first screen found in screen list.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Bryce Harrington
cpaul@redhat.com
Bob Ham
Emmanuel Gil Peyrot
Giulio Camuffo
Sjoerd Simons
Jonny Lamb
Nobuhiko Tanibata
Derek Foreman
Jussi Kukkonen
Chris Michael
Pekka Paalanen