In current form SHM buffers pixel format can only be printed as 0 and 1.
With the help of this helper we align with DRM_FORMAT_ pixel format.
Signed-off-by: Marius Vlad <marius.vlad0@gmail.com>
Use the pixel format table to parse format names. This makes the parser
recognize almost all DRM format names.
Not all formats are usable, but we rely on the use to fail
appropriately. What we can use depends on the drivers anyway.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a function to find a format description by the DRM format name. This
will be useful when parsing configuration strings.
While at it, fix the two function formattings in pixel-formats.h to
match everything else in the file.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There is often a need to print the name of a pixel format. Printing the
raw numeric value is hard to decipher, printing the four ASCII
characters is slightly more human-friendly but still needs a decoder
table. Add a name that can be printed easily.
The bulk of this patch was done with:
sed -i -e 's/\.format = DRM_FORMAT_\(.\+\),/DRM_FORMAT(\1),/' libweston/pixel-formats.c
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It's a bit surprising that Weston looks different when launched from the root
of the git repo vs from elsewhere.
But it's also technically a security vulnerability: if I launch it from
a directory like /tmp, it might pick up a weston.ini created by another user,
which could then load modules with arbitrary code. Basically, it's the same
problem as including "." in $PATH.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
input panel related members of ivi_shell struct are
not required anymore. Also get_default_view(),
input_panel_setup() and input_panel_destroy() are not used.
Therefore, we can remove them.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
input panel implementation puts contents of an
application, which uses input_method protocol,
on top of all other surfaces. It is not controllable
with ivi-layout interface.
This is not acceptable for an In-Vehicle Infotainment
platform. Because we have to ensure configured scenegraph
cannot be hijacked by any rogue application.
Therefore, I am removing input panel implementation
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
For toplevel surfaces, the shell will do the same thing. Without this, the
commit does not trigger repaints, because the output mask for the surface
is not set.
Without this the popup is not shown unless something else triggers a
repaint. This is usually not seen because the mouse cursor triggers a
repaint at the same time.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Introduce a helper function to disconnect the client on unhandled
buffer types, and use it in the gl and pixman renderers. The function
is modeled after linux_dmabuf_buffer_send_server_error.
Also print the egl error state in the gl renderer, in case the
unrecognized buffer error happens when querying an egl buffer.
https://gitlab.freedesktop.org/wayland/weston/issues/148
If the view is not mapped, we do not need to update its
properties. We can use ivi_view_is_mapped() function to
check it.
Also we don't need to call weston_view_damage_below()
for weston_views, which were in the scenegraph. Because
we are calling weston_view_unmap for views of unmapped
ivi_views in build_view_list() function
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
From Michael Olbrich:
"Both the core in weston_compositor_build_view_list() with view.link
and the ivi-shell in commit_screen_list() with view.layer_link
don't remove the old views from the list.
As a result, all views that are not currently in the list have
old broken links. Destroying such a view tries to remove
the view from these lists and will access the old, invalid pointers."
Therefore, we have to unmap weston_views which are not in current
scenegraph of ivi-shell. I implemented ivi_view_is_mapped() function
to check mappedness of ivi_views. The functions checks:
- the view is on a layer's order list
- the layer is on a screen
- the layer and view's ivi_surface are visible
If ivi_view is not mapped but weston_view is still mapped,
we have to unmap the weston_view with weston_view_unmap() call.
Reported-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Remoting plugin support streaming image of virtual output on drm-backend
to remote output. By appending remote-output section in weston.ini,
weston loads remoting plugin module and creates virtual outputs via
remoting plugin. The mode, host, and port properties are configurable in
remote-output section.
This plugin send motion jpeg images to client via RTP using gstreamer.
Client can receive by using following pipeline of gst-launch.
gst-launch-1.0 rtpbin name=rtpbin \
udpsrc caps="application/x-rtp,media=(string)video,clock-rate=(int)90000,
encoding-name=JPEG,payload=26" port=[PORTNUMBER] !
rtpbin.recv_rtp_sink_0 \
rtpbin. ! rtpjpegdepay ! jpegdec ! autovideosink \
udpsrc port=[PORTNUMBER+1] ! rtpbin.recv_rtcp_sink_0 \
rtpbin.send_rtcp_src_0 !
udpsink port=[PORTNUMBER+2] sync=false async=false
where, PORTNUMBER is specified in weston.ini.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Xwayland block SIGUSR1 signal for handling this signal. However, if some
weston plugins creates additional threads before xwayland is loaded,
this signal get delivered these threads and causes weston quit.
Therefore, we should set up SIGUSR1 blocking early so that these threads
can inherit the setting when created.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Add support virtual output for streaming image to remote output by
remoting-plugin which will be added by the patch:
"Add remoting plugin for output streaming."
The gbm bo of virtual output is the linear format.
Virtual output is implemented based on a patch by Grigory Kletsko
<grigory.kletsko@cogentembedded.com>.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Store usage flags of gbm bo in drm_output in order to specify the bo
format for each output. A following patch will add a new type of
drm_output which requires different gbm_bo_flags.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Add new API to gl-renderer interface for providing fence sync fd. the
backend can wait for GPU rendering by this API.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
In the case where CreateContext/MakeCurrent fails, we still want to
know what the EGL driver is capable of.
Move the EGL info printing, just after the eglInitialize() call to
ensure that.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Split the two into separate functions. Former requires an initialized
EGL display, while the latter a current context.
We will use that distinction with the next patch.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We are currently formatting 32-bit signed integers into 8 byte buffers,
which are too small, causing the compiler to complain. Update the buffer
size to the minimum required value of 12 bytes: 1 for the sign, 10 for
the number, and 1 for the null byte terminator.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Not every output will have a backlight control, and even if it does we
may just not be able to find it. Not having backlight control isn't an
error, so don't spam the log with it, as doing so can confuse users into
thinking this is an actual error which is responsible for their real
problems.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Not having swap_buffers_with_damage could cause a performance impact on
some backends, but at least on GBM it causes no issues. It also seems to
confuse users into thinking it's a legitimate error which could explain
session slowness.
Similarly with buffer_age, whilst we do lose a little bit of performance
by not being able to do partial renders, it is not a great deal, and the
user is unlikely to be able to do anything about it in any event.
Remove the warning; we print the full extension list at startup, so we
already have enough information from the logs to easily diagnose any
real errors.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Keep non-desktop heads representing e.g. head mounted displays turned off by
default. When using the DRM backend they can still be enabled by setting an
explicit [output] mode (or "mode=preferred") in weston.ini.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Use the DRM connector "non-desktop" property to mark weston_heads that
represent head mounted displays and other non-standard displays that the
desktop should not be extended to.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add non-desktop property for weston_heads representing displays that the
desktop should not be extended to by default, e.g. head mounted displays.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Implement drm_view_is_opaque() using weston_view_is_opaque(). Also, use
weston_view_is_opaque() directly in drm_output_propose_state(), with the
clipped_view.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Use the weston_surface is_opaque property, the opaque region, and the view
alpha value to determine whether the weston_view is opaque in a specific
region.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add an is_opaque property that is set to true if the attached buffer does not
have an alpha component, or if the solid color is non-transparent.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add the centered option as background-type. This draws the image
once in the center of the screen. If the image is larger, it will
be cropped like scale-crop.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Only draw the background once, using the the current default
background color or the user specified background color.
This allows for non-filling background image implemenation
while still using the specified background color.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Weston should not exit if stdin is a closed stream. This allows
to launch with a closed stdin:
# weston <&-
This fixes screen sharing using weston: Weston closes the stdin
before forking itself to execute the screen sharing instance of
weston. Before this patch screen sharing failed with:
Screen share failed: No wl_shm found
unknown child process exited
Fixes: f0d39b2243 ("weston: Set CLOEXEC on stdin")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Add a 'drm-debug' scope which prints verbose information about the DRM
backend's repaint cycle, including the decision tree on how views are
assigned (or not) to planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Shift up our calculation of the flags we use for atomic commits. We will
later use this to differentiate between test-only and full commits when
printing debug information inside drm_output_state_apply_atomic.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a 'scene-graph' debug scope which will dump out the current set of
outputs, layers, and views and as much information as possible about how
they are rendered and composited.
Signed-off-by: Daniel Stone <daniels@collabora.com>
As a counterpart to weston_layer_set_mask_infinite(), returning if the
mask is the same as what is set.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is better than running Weston with WAYLAND_DEBUG=server:
- It is enabled on demand, no unnecessary flooding and no need to
restart the compositor if debug was enabled.
- It prints client pointers so that messages with different clients can
be seen apart.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
parse and print message arguments in protocol_log_fn
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Instead of a compile time choice, offer the XWM debugging messages
through the weston-debug protocol and tool on demand. Users will not
need to recompile weston to get XWM debugging, and it won't flood the
weston log.
The debug scope needs to be initialized in launcher.c for it be
available from start, before the first X11 client tries to connect and
initializes XWM.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
pass the wm_debug scope to weston_debug_scope_printf API to append
the scopename to the timestr
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is preparation for using the weston-debug infrastructure for
WM_DEBUG. dump_property() may be called from different debugging
contexts and often needs to be prefixed with more information.
An alternative to this patch would be to pass in the weston_debug_scope
as an argument to dump_property(), but then all callers would need to be
converted to weston-debug infra in a single commit.
Therefore require the callers to provide the FILE* to print to.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Marius Vlad
Pekka Paalanen
Dima Ryazanov
Emre Ucan
Arkadiusz Hiler
Michael Olbrich
Vasilis Liaskovitis
emersion
orbitcowboy
Deepak Rawat
Tomohito Esaki
Emil Velikov
Alexandros Frantzis
Daniel Stone
Philipp Zabel
Changwoo Cho
Emmanuel Gil Peyrot
Sruthik P
Stefan Agner
Pekka Paalanen