Those were found while working on simple-dmabuf-v4l, as found in the
next patch of this series.
After each buffer’s params were ready to be submitted to the
compositor, a roundtrip was done, which is wasteful since we can do it
only once after having queued all the params we want. Removing those
nested roundtrips also prevent the potentially dangerous side-effect of
calling callbacks for later events while previous events were still
being processed.
An extraneous surface damage was also removed.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Differential Revision: https://phabricator.freedesktop.org/D344
This client was using an Intel-specific way to allocate a dmabuf, so it
makes sense to have that in its name.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Differential Revision: https://phabricator.freedesktop.org/D342
Fall back to not showing anything as before if we don't have a
compositor with wl_output new enough (version 2 or newer).
Signed-off-by: Jonny Lamb <jonny.lamb@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A surface ID for layer of background/panel image is set by key: background-id
or panel-id at weston.ini. To support multi screens, it also support offset,
surface-id-offset, to offset the surface ID to next ID for a layer on next
screen.
According to the above key, hmi-controller and ivi-shell-user-interface
who increments the number of screens per notification of wl_output.
crate surface and draw background/panel image on multi surface on screens.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add a new flag for testing damage in buffer co-ordinates
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We've been setting up the viewport by moving the start pointer of the
draw buffer, but later when we want to post damage in buffer co-ordinates
we'll need to keep track of the x,y offsets anyway.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
when weston is running on qemux86 device, there is an error with following.
[08:02:07.897] launching '/usr/lib/weston/weston-ivi-shell-user-interface'
[08:02:08.201] /usr/lib/weston/weston-ivi-shell-user-interface died on signal 11
this is caused by type mismatch, and
it does occur on qemux86-64
Signed-off-by: Yong-iL Joh <yong-il.joh@windriver.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
It's just a direct call to wl_surface_damage() anyway, and the only
caller no longer exists.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We're going to post damage when the widget redraw happens anyway.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It doesn't fill a useful function and is not intended to be continued.
If there is need for workspace manipulation from clients a protocol
based on those future needs need to be properly designed.
workspaces.xml is probably not very relevant since it did the bare
minimum.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Due to the effort of moving a way from non-prefixed protocols, rename
the weston specific screenshooter protocol to weston_screenshooter.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In the effort of going away from generic names of protocols only
relevant for weston, rename the weston desktop shell
weston_desktop_shell.
This also resets the version to 1, as there will be no prior versions
to weston_desktop_shell.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Use the fullscreen-shell protocol XML from the wayland-protocols
installation, and remove the one we provide ourself.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We discard motion outside the window on the assumption it's from before
some event that caused the window to shrink. However, if we have a grab
it's likely that this motion is actually from dragging from the inside
of the window out.
This fixes a problem where drag selecting in weston terminal behaves
oddly - it doesn't update the select region while the drag is happening
outside the window.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
If we're going to ignore motion below and to the right when coming
out of maximize, we should probably also ignore it above and to
the left.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Fix a graphics glitch in the stacking demo in which a transient
window's drop shadow is visibile within the interior of the window.
Signed-off-by: Ben Hummon <benjamin.hummon@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
CLOCK_BOOTTIME is a relatively new* feature that may not actually be
present everywhere (I'm looking at you wheezy). Since our use of it
is actually only cosmetic, I've just ifdef'd if.
* No it isn't.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Apparently it's possible for a compositor to advertise seats with
different versions on the same connection, so this makes us more robust
against that dubious behaviour.
This also tracks the seat version we requested instead of the advertised
maximum.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: David FORT <contact@hardening-consulting.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This patch adds the missing calls to release when the seat has capabilities
changes. It also fixes a missing release of the touch object and a leak with
old clients.
Signed-off-by: David FORT <contact@hardening-consulting.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We could not paste text when its source went outside the
visible part of the buffer ; this is because we were
incorrectly assuming that our iterator should start at
row 0, while it could very well be negative.
Signed-off-by: Manuel Bachmann <manuel.bachmann@iot.bzh>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
We need to input_ungrab() on the stored input, not the one that caused
the release - otherwise bad things can happen in multi-seat environments
when a seat that didn't open the menu closes it.
To reproduce:
configure two seats
launch weston terminal
open the right click pop up
select a menu item from the other seat
The next click from the seat that opened the menu will cause a segfault.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
So it turns out if you cat /dev/urandom and drag select in the mess
you can crash weston-terminal. There may also be more legitimate
ways of doing this.
The reason is that isalpha() and isdigit() only accept values that
fit within an unsigned char or are EOF.
By treating values < 0 the same as values > 127 we prevent this crash.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
We should be checking our scaled image height against the allocation
height rather than the allocation width.
Fixes vertical image motion when horizontal motion restricted, i.e.
when window is wide and short compared to the image.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
mesa supports EGLSwapInterval 0 now, so lets remove this hack. As a
bonus we don't conflict with the XDG shell protocol that doesn't allow
committing a null-buffer, which was a side effect of this hack.
This patch reverts e9297f8e7e. See that
commit for an explanation how this worked.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
[Pekka: added reference to the original commit]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2:
- adapted to protocol changes
- added TODO comments
- minor clean-up
- change y-invert from per-plane boolean to per-buffer flag
v3:
- fix a typo: 1 -> i (noticed by Carlos Olmedo Escobar)
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
- opening braces are on the same line as the if statement
- opening braces are not on the same line as the function name
- space between for/while/if and opening parenthesis
Signed-off-by: Dawid Gajownik <gajownik@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
This seems like a good idea for consistency that the protocol header
is included for any protocols used by the code. This also means the
code will compile with headers generated by wayland-scanner -c.
Fixed to use angle brackets.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Some animated cursor sets use very long delays, but until now we'd use the
frame callback and update the cursor at the display framerate anyway.
Now we use a timerfd to drive cursor animation if the delay is longer
than 100ms, or the old method for short delays.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
A new optional parameter "-d msecs" allows to specify a
delay before the surface attach/damage/commit to shift
the point in time when a surface update is committed.
This allows to test how different client timings interact
with the compositors repaint timing.
Suggested by Pekka Paalanen.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: Clarify the intent, doing a delay in window_create_feedback()
is a bit surprising. Use nanosleep() instead of clock_nanosleep(),
which may not support the chosen presentation clock.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It is redundant to check x*alloc's return value for null pointers, since
they are guaranteed to either return non-NULL or terminate the program.
In cases where we memset the malloc'd memory to 0, we can more
efficiently use the xzalloc() routine. zalloc looks for opportunities
to return memory chunks that have already been zero'd out, so it can
provide better performance.
This patch addresses this warning, reported by Denis Denisov:
[clients/window.c:1164] -> [clients/window.c:1166]: (warning) Possible
null pointer dereference: surface - otherwise it is redundant to check
it against null.
[clients/window.c:4513] -> [clients/window.c:4514]: (warning) Possible
null pointer dereference: surface - otherwise it is redundant to check
it against null.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
This removes the weston-screensaver client.
Screensavers are not so useful, DPMS is much better. This example has
existed here for a good while, and things that we could learn from it
have been learnt.
Nowadays this is just dead weigth, which is usually not even compiled,
because it depends on both cairo-gl and GLU. Removing it removes the
only possible dependency to GLU and one user of cairo-gl. Now the last
user of cairo-gl is gears (clients/nested.c uses cairo-glesv2).
Support for screensavers is still left in desktop-shell, so external
projects can still have their screensavers if they want.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Removed duplicate definitions of the container_of() macro and
refactored sources to use the single implementation.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Removed multiple definitions of the MIN() macro from existing
locations and unified with a single definition. Updated sources
to use the shared version.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
To help reduce code duplication and also 'kitchen-sink' includes
the ARRAY_LENGTH macro was moved to a stand-alone file and
referenced from the sources consuming it. Other macros will be
added in subsequent passes.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Using the parent '../' path component in #include statements makes
the codebase more rigid and is redundant due to proper -I use.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Fixes warning:
clients/editor.c: In function ‘data_source_send’:
clients/editor.c:573:7: warning: ignoring return value of ‘write’,
declared with attribute warn_unused_result [-Wunused-result]
write(fd, editor->selected_text, strlen(editor->selected_text) + 1);
^
weston-editor is the only stock client spawning the virtual
keyboard ; which means it may be the only client able to
obtain some special characters (depending on the user's
keyboard layout).
If we implement Cut, Copy and Paste, the user has now a way
to copy such characters to other useful clients (such as
weston-terminal). Plus, it demonstrates text data exchange
between two clients of different nature.
Functionality is implemented in a right-click menu and the
Ctrl+Shift+X/C/V bindings, just as in weston-terminal.
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: Bryce Harrington <bryce@osg.samsung.com>
It doesn't work anymore, and it never did anything useful.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Should be "client" instead of "nclient".
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Emmanuel Gil Peyrot
Jonny Lamb
Nobuhiko Tanibata
Derek Foreman
Yong-iL Joh
Chris Michael
Bryce Harrington
Jonas Ådahl
Ben Hummon
FORT David
Manuel Bachmann
George Kiagiadakis
Dawid Gajownik
Ryo Munakata
Bill Spitzak
Mario Kleiner
Pekka Paalanen
Jon Cruz
Murray Calavera
Michael Vetter
Manuel Bachmann
Dima Ryazanov