This clean-up seems alright, but someone with better knowledge has to
doublecheck this function. I guess there's a lot of space for clean-up
there.
[pq: looks ok, redone since did not apply after my changes]
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Setting a window type is a non-visual operation, it is not supposed to
affect the rendering immediately. Therefore it does not need to apply
surface damage.
The proper surface damage is applied on an attach request following a
window type change.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
As weston_surface_update_transform() automatically applies before and
after damage on surface geometry change, we don't need to explicitly add
the same damage in motion_notify() for the cursor surface.
We still need the side-effect, that is scheduling a repaint.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Round off fractions from non-transformed surface position coordinates.
Transformed surface moved by a client may have non-integer position
coordinates. That is required to prevent drifting on continuous
resizing.
We can round the position to integers when the surface is not (anymore)
transformed.
This change may fix a rounding inconsistency in the opaque region setup,
where the rectangle is initialised from the coordinates without explicit
rounding operation.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
In the past, weston_surface_configure() was used to change the geometry,
apply damage, and assign an output.
Remove all calls to weston_surface_configure() that do not change the
surface geometry. Add damage calls where needed to keep the wanted
configure side-effects.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Move the call to assign an output from weston_surface_configure() to
weston_surface_update_transform().
As update_transform takes new geometry into use, it should also reassign
the output for the surface, but only if an output was already assigned.
Add explicit assing output calls to where we relied on
weston_surface_configure() unconditionally assigning the output.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Move the surface opaque region setup from weston_surface_configure() to
weston_surface_update_transform(), so we have less reason to call
update_transform from configure. Opaque region depends on geometry,
after all.
Also move the opaque field from weston_surface to
weston_surface::transform to make this obvious.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Remove redundant weston_surface_update_transform() calls from within
output repaint paths, and add a comment that we need to rely on
surface->geometry.dirty == 0 within the repaint sub-functions.
Now that weston_surface_update_transform() does damage as needed, and
weston_output_repaint() explicitly calls update_transform, we can reduce
the updates in rotate_grab_motion() to simply scheduling a repaint. This
will guarantee that the change in rotation ends up on screen ASAP.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
weston_surface_update_transform() is similar to
weston_surface_configure() in that it changes the surface region on
screen. Unlike configure, update_transform forgets to deal damage at
all, yet it is the only place where we can do damage_below() as needed.
Add a damage_below call to deal damage for the old surface region only
when needed. This uses the cached state from surface->transform to get
the old region.
Add a damage call to deal damage for the new surface region, after
updating the cached state.
Add a repaint call, since we have changed the scene and should render it
out.
This change fixes the rotation not updating the screen properly.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The non-transformed case looked a little odd, calling
weston_surface_to_global(), since it already tests for transform.enabled
and simply uses width, height for the box.
Streamline it, by open-coding weston_surface_to_global(), and avoiding
another call into weston_surface_update_transform(). This way it does
not look suspicious to me.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
In surface_compute_bbox(), call surface_to_global_float() instead of
weston_surface_to_global(). This avoids the recursion:
weston_surface_update_transform()
weston_surface_update_transform_enable()
surface_compute_bbox()
weston_surface_to_global()
weston_surface_update_transform()
which might be non-obvious when reading the code.
Computing the min and max coordinates in floats, we can have a tight
rounding margin by using floor() and ceil().
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Split two helper functions out of weston_surface_update_transform() to:
- make the code clearer
- update the bounding box properly even if transformation fails
- unify the return point
Also add a comment on what matrix.d[12] is.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Extract the core into a function that does not call
weston_surface_update_transform() or schedule repaint.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Rotating a surface should not force a full display repaint, so remove
that.
This change exposes a bug: weston_surface_update_transform() does not
apply damage, but it does change surface geometry. While you rotate a
surface, repaints do not work.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Transform a menu popup the same as its parent surface.
The parent's transformation is snapshotted at the popup map() time, and
does not follow further parent motion.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Computing the real maximal opaque screen aligned rectangle of a
transformed surface is hard. Let's drop the opaque optimisation
instead.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
When a transformed (rotated) surface is continuously resized from its
top-left corner, its location will drift. This is due to accumulating
rounding errors in transforming an offset from surface-local to global
coordinates in surface_attach().
Diminish the drift down to unobservable level by changing the
weston_surface global position from integer to float.
The offset transformation is now done without rounding. To preserve the
precision, wl_shell::configure() interface must use floats, and so does
weston_surface_configure(), too.
The con of this patch is that it adds inconsistency to the surface
position coordinates: sometimes they are floats, sometimes integers.
Commit a0d6dc4f26 lost one line of code in
the refactoring, and so did not reset the surface damage on repaint
anymore. This causes damage to only accumulate, leading to a full
display redraw every cycle and hiding damage tracking issues.
Put the damage clear back.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The uniform location variables should be signed, according to the OpenGL
ES 2 specification. Moreover, GL_NONE, i.e. 0, is not an invalid nor
special location; it is actually used as a valid uniform location.
Change struct weston_shader uniform members to signed.
Stop using 0 for identifying a non-existing uniform, use -1 instead.
Furthermore, as the spec says a) glGetUniformLocation() will return -1
for non-active/existing uniforms, and b) glUniform*() function will
simply ignore all calls with location -1, we can simplify the code. We
don't have to avoid locating uniforms that don't exist, and we don't
need to test for them in weston_surface_draw() either.
Remove the micro-optimisation that avoids setting 'alpha' uniform if it
has not changed, in the name of simplification.
Unify shader creation by dropping init_solid_shader(), and calling
weston_shader_init() instead. The downside is that we compile the vertex
shader twice at startup now.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The x, y offsets in attach request are in surface-local coordinates, as
that is the only coordinate system the clients know about. The offset
must be transformed to global coordinate system to be applied properly.
This approximately fixes the top-left resizing of transformed surfaces.
However, it suffers from drift due to accumulating rounding errors in
continuous resizing.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This fixes the resize pointer motion vs. surface size mismatch for
right/bottom direction resizes. Top/left resizes need further fixes in
surface motion.
Additionally there is some clean-up in weston_surface_resize() to
eliminate a failure path, and fixing the Weston resize binding's resize
direction heuristic to follow transformations.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
In the stack of transformations, change the rotation to be applied
to the surface before the absolute positioning. Doing so avoids having
to undo and redo the absolute positioning, and we can simply use the
surface center in local coordinates as the origin.
This fixes the surface move. Before, the surface moved along the surface
local axis, but the user expects it to move along the global axis with
the pointer.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Change weston_surface_damage*() functions to use the full surface
bounding box or call surface_compute_bbox() to find the bounding box for
an arbitrary rectangle.
This should fix all rendering artifacts for non-opaque (i.e. ARGB)
transformed surfaces.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Use the bounding box to compute an approximation of which output
contains most of the surface.
Move the region32 init outside the loop, and fini it, too.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
If we ever have transformed cursor surfaces, we would better use the
bounding box to check if it is on the given output.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Use the proper bounding box in clipping the surface repaint area. Fixes
excessive clipping for transformed surfaces.
Also don't leak the region32 on early return.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
weston_surface::transform.boundingbox depends on width and height, and
therefore geometry.dirty flag, so move width and height into geometry.
Fix all users and check that the dirty flag is set.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Compute a surface bounding box, especially for transformed surfaces, for
which one cannot simply use x,y,width,height.
The bounding box depends on width and height, so these are now under the
geometry.dirty flag.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Now that we can insert a transformation before the surface position
translation, we can drop geometry.x,y from the zoom transformation. That
was just undoing and redoing the position translation.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Not sure this check belongs here, but as the position checks are here
too, I added this. Just so we don't forget.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
weston_surface::transform.position depends on x,y, and therefore the
dirty flag, so move x and y into geometry.
Also add the missing dirty flags.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Put the surface translation (absolute position) into the surface
transformations list. This allows to set additional transformations
before and after the global translation.
Having the translation cached, changing the surface x,y now requires to
set the geometry.dirty flag.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Previously, if a surface was transformed, it repainted as a whole,
regardless of the computed repaint region. As damage regions determine
repaint regions and whether a surface is considered for drawing at all,
this lead to disappearing surfaces if all surfaces were considered
transformed. Also transparent transformed surfaces were redrawn without
the surfaces below being properly redrawn, leading to alpha-saturation.
Fix that by making texture_region() use the proper global-to-surface
coordinate transformation for texture coordinates. This makes it
possible to call texture_region() also for transformed surfaces.
As texture coordinates may now lie outside the valid texture image, the
fragment shader is modified to check the fragment texture coordinates.
The special path texture_transformed_surface() is no longer used and is
removed.
This change fixes many of the rendering artifacts related to transformed
surfaces.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Tiago Vignatti
Pekka Paalanen
Kristian Høgsberg