The existing algorithm had some corner cases (pun!), where it failed to
produce correct vertices in the right order. This appeared only when the
surface was transformed (rotated). It also produced degenerate polygons
(3 or more vertices with zero polygon area) for non-transformed cases
where the clipping and surface rectangles were adjacent but not
overlapping.
Introduce a new algorithm for finding the boundary vertices of the
intersection of a coordinate axis aligned rectangle and an arbitrary
polygon (here a quadrilateral). The code is based on the
Sutherland-Hodgman algorithm, where a polygon is clipped by infinite
lines one at a time.
This new algorithm should always produce the correct vertices in the
clockwise winding order, and discard duplicate vertices and degenerate
polygons. It retains the fast paths of the existing algorithm for the
no-hit and non-transformed cases.
Benchmarking with earlier versions showed that the new algorithm is
a little slower (56 vs. 68 us/call) than the existing algorithm, for
the transformed case. The 'cliptest f' command before and after this
commit can be used to compare the speed of the transformed case only.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Acked-by: Rob Clark <rob.clark@linaro.org>
We can now load any number of general modules, and the shell and xwayland
are just two of them. We continue to use the mechanism for testing but
custom input drivers or logging mechanisms, for example are other use cases.
We rename it flush_damage() as it's the point where we update our rendering
API source (eg, the gles2 texture) according to the accumulated damage,
if necessary.
We move the EGL and GLES2 output repaint code into a new gles2-render.c
file. The eglMakeCurrent, glViewPort, surface loop etc was duplicated
across all backends, but this patch moves it to a new file.
surface_accumulate_damage() will call surface_compute_bbox() with the
extents of the surface damage region, for transformed surfaces only. If
there is no damage, surface_compute_bbox() will round up the empty
rectangle to a 1x1 rectangle. Triangles are produced for this 1x1
rectangle intersected with the surface.
The problem showed up with the triangle fan debug, where some seemingly
garbage pixels showed up relative to rotated surfaces.
Fix this by explicitly checking, that the area, for which a bounding box
is being computed for, is not zero.
Note, that the bbox will also be empty if only one of width and height
is zero. We do not paint things with zero thickness.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Rob Clark <rob.clark@linaro.org>
The intersection of two rectangles is guaranteed to be convex. Therefore
we do not need a center vertex for the triangle fan, we can simply use
the whatever first vertex the intersection polygon has. This reduces the
number of triangles, while still painting the exact same area.
While at it, emit_vertex() nested function is factored into the
for-loop, since that is the only calling site left.
Comments are updated to reflect the changes, and some unrelated comment
fixes are in repaint_region().
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Rob Clark <rob.clark@linaro.org>
- make it respect output transforms by making sure the uniforms are
up-to-date
- properly restore the current shader program, in case it was
overridden
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
weston_surface_draw() is restructured so that it will always use the
RGBX shader for opaque regions, if the surface is assigned the RGBA
shader.
Previously for opaque regions, we simply assumed, that the texture alpha
would be 1.0. If it was not (which really is an application bug), the
region would be misrendered. The RGBX shader forces the texture alpha to
1.0.
Xwayland surfaces may have bad alpha data in the opaque client area. If
blending was enabled, the bad alpha would be used with the RGBA shader.
This patch fixes rendering opaque xwayland windows with full-surface
alpha applied.
Test case: xterm, with full-surface alpha one step below 1.0. Before,
black text was fully transparent, now it is correctly only slightly
transparent.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Remove weston_surface::opaque_rect completely.
Instead, set the opaque region in xwayland.
Before this patch, black text in xterm was transparent. Now it is not.
However, this patch fixes only a part of the alpha problem. If you apply
full-surface alpha with super+alt+wheel, the problem reappears. This
problem is still due to bad alpha channel contents on xwayland windows.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
The workspace manager interface purpose is to provide clients with
control and knowledge about the current workspace state. Initially only
one function and one event exists; moving a surface and state updated
event. A workspace is represented as an index in a 1 dimensional array.
A client keeps track of the state by being broadcasted events when the
state changes, currently limited to current workspace or number of
workspaces available.
A client can send an asynchronous request to the manager asking to move
a surface to workspace identified by an index. It is up to the shell to
actually move it.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
By default, Control + Shift + Up/Down will move the currently active
surface, if any, while changing to another workspace.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
To avoid having a surface on a hidden workspace in focus always set the
focus (even to NULL) when restoring.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Draw the borders of all the triangles.
v1: original
v2: add keybinding to enable/disable fan debug (super-alt-space),
cycle colors to make it easier to see individual draws, and
redraw undamaged region to clean up previous frames debug
lines
Signed-off-by: Rob Clark <rob@ti.com>
We can use and render the opaque region only, if we are not applying a
full-surface alpha.
Test case: weston-terminal; use super+alt+mousewheel to adjust the
window transparency. Before it went black, now it blends correctly.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Remove the weston_surface::blend attribute, which really meant that the
texture produced valid alpha values. This was used to override the opaque
region for RGBX surfaces, which produce undefined values for alpha.
Instead, compile a new shader especially for RGBX surfaces, that
hardcodes the sampled alpha as 1.0.
Before "compositor: optimize/simplify shaders" there was a 'vec4 opaque'
in the shaders, that would cause part of the texture to be forced to
alpha=1.0. Now that is gone, and we need this replacement.
To test: launch simple-shm, and use the super+alt+mousewheel combination
to make it transparent. It should not show a light cross over the window.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Re-work how the shaders and emitted vertices work. Rather than always
rendering clip-rect sized quads and doing transformation in tex coords
(and requiring the corresponding clipping in frag shader), instead
emit transformed vertices, clipped wrt. dirty region, and use simpler
frag shaders. Also, split the rendering, so blended surfaces with an
opaque region have the opaque region drawn with blend disabled. The
result is considerably fewer pixels drawn with blend enabled, and much
fewer cycles in the frag shader.
This requires having some more complex logic to figure out the vertices
of the shape which forms the intersection of the clip rect and the
transformed surface. Which has perhaps got a few bugs or missing cases,
still (visual glitches in some cases) but at this point more or less is
starting to work. I think it is at least far enough along to get some
initial review.
The result, on small SoC GPU (omap4/pandaboard) on 1920x1080 display,
for simple stuff like moving windows around, I get 60fps (before 30fps
or less), and pushing YUV buffers for hw decoded 1080p video goes from
~6fps to 30fps, with no drop in framerate for transformed/rotated video
surface.
v1: original
v2: check that perpendicular intersect vertex falls within bounds of
transformed surface
v3: update w/ comments and fixes from Pekka Paalanen
v4: fix for full surface alpha from Pekka Paalanen, fix compositor-
wayland build
Signed-off-by: Rob Clark <rob@ti.com>
In cases where the GPU can natively handle certain YUV formats,
eglQueryWaylandBufferWL() can return the value EGL_TEXTURE_EXTERNAL_WL
and the compositor will treat the buffer as a single egl-image-external.
See:
http://www.khronos.org/registry/gles/extensions/OES/OES_EGL_image_external.txt
v1: original
v2: rename EGL_TEXTURE_EXTERNAL_OES -> EGL_TEXTURE_EXTERNAL_WL and query
for the extension
v3: fix build without updated mesa headers, if EGL_TEXTURE_EXTERNAL_WL
#define is missing from older mesa headers.
v4: resend without missing parts
Signed-off-by: Rob Clark <rob@ti.com>
This patch allows rotation and mirroring outputs for x11 and drm backends.
A new 'transform' key can be set in the [output] section. From the protocol:
"The flipped values correspond to an initial flip around a vertical axis
followed by rotation."
The transform key can be one of the following 8 strings:
normal
90
180
270
flipped
flipped-90
flipped-180
flipped-270
Instead of clearing the whole output region after a repaint, clear
only the regions that were actually painted. This way, the damage
added when a surface moves from the primary plane to another one is
kept while this region is obscured by the opaque region. This allows
the contents below an overlaid surface to be culled, but to make this
work properly, it is also necessary to change the way previous damage
is drawn.
Consider the following scenario: a surface is moved to an overlay plane
leaving some damage in the primary plane. On the following frame, the
surface on the overlay moves, revealing part of the damaged region on
the primary plane. On the frame after that, the overlaid surface moves
back to its previous position obscuring the region of the primary plane
repainted before. At this point, the repainted region was added to the
output's previous damage so that it is draw to both buffers. But since
this region is now obscured, the redrawing is skipped. If the overlaid
surface moves again revealing this region, one of the buffers actually
contains the wrong content.
To fix this problem, this patch ensures that any previous damage that
would be lost is actually preserved by folding it back into the
primary plane damage just before repainting.
We don't want to send enter/leave events to the compositor when the pointer
enters the surface, only when the pointer enters the content area. This
avoids hiding the cursor when entering the frame and sending out-of-bounds
coordinates to notify_pointer_focus().
This way we map the surface if it currently isn't mapped and avoid
duplicating some of the code already in pointer_cursor_surface_configure().
Without this, the cursor code relied on a wl_surface.attach() to show the
new pointer surface. If we're not changing the cursor buffer, we don't
get that, but we still need to map the cursor.
Replace all occurrences of workspace_damage_all_surfaces() with
weston_compositor_schedule_repaint(). This fixes a bug exposed by
982387011f where trying to switch workspaces while there are no
surfaces on the current workspace fails to start the animation.
Place the window in a random position on the output where the first seat with
a pointer is. When calculating the random position limit the range to the
area that would ensure that the whole surface is visible. If the surface is
larger than the output then the surface is placed at the origin of the
output.
This change is based on the good work of Scott Moreau <oreaus@gmail.com>
If a client sends a pong message out of the blue, we deref ping_timer
which is NULL and then crash. Unsolicited pong requests indicate that
something is wrong on the client, but the compositor should survide that.
Add a wl_seat argument to the activate and deactivate requests of
text_method.
On activation a text_model gets assigned to the input_method of the
wl_seat specified in the activate request.
Pekka Paalanen
Kristian Høgsberg
Philipp Brüschweiler
Jonas Ådahl
Rob Clark
Scott Moreau
Ander Conselvan de Oliveira
Rob Bradford
Jan Arne Petersen