Pressing ctrl-alt-o will cause the overlays to be hidden, but surfaces
will still be assigned to different planes. This helps with debugging
of repaint culling below surfaces in other planes.
Culling of the repaint of a surface behind an opaque surface on the
same plane was broken by commit 547149a9 [1]. The idea of that commit
is that the damage obscured by an overlay would remain on the primary
plane damage and be repainted when the overlay moved. However, in the
case the two surfaces are on the same plane, the opaque one is not
obscured, so it ends up being repainted.
This commit adds an opaque field to struct weston_plane, that is built
incrementally when accumulating damage. The opaque region of surfaces
on the same plane are removed from the plane's damage, restoring the
previous culling behavior. But since damage behind opaque region of
other planes is maintained, the bug solved in the mentioned commit is
not regressed.
https://bugs.freedesktop.org/show_bug.cgi?id=56537
In order to use xcb_request_check(), given a request without a reply,
you need to use the _checked() variant of the request function.
See xcb-requests(3).
Signed-off-by: Ran Benita <ran234@gmail.com>
We need to clamp or center on a per axis basis. If the window is wider
but the image is taller, we need to center horizontally but
clamp vertically. We can only do that if by combining the two
functions.
Clicking outside popups closes them except in case of a shell grab
(move, resize or rotate), in which case we move the parent window away
from under the popup. Instead, just end the popup in those cases.
https://bugs.freedesktop.org/show_bug.cgi?id=55674
Partial repaints have been broken since the introduction of the atomic
surface updates. The problem was that surface_commit would set the
geometry dirty flag unconditionally, causing transform updates on every
frame which would in turn cause weston_surface_damage_below() to damage
the whole surface area.
This patch changes this so that flag is only set if the pending buffer
has a different size, the location of the surface changed or the opaque
region changed.
Note that changing the opaque region will cause a full repaint of the
affected surface, because of the transform update.
https://bugs.freedesktop.org/show_bug.cgi?id=56538
The intended behavior is that a quick click (press and then release
within 500ms) just pops up the menu and doesn't select anything. Then
we can mouse around and and click to select an item. Alternatively, a
click and hold (ie press and release after 500ms) lets you press right
button, mouse down on the menu item you want and release to select it.
This is how menus work in most toolkits.
The handling in weston is fine, it's there to handle the case where
the button release happens outside any client window, since the client
doesn't get those events. If such a release happens late or we get a
second release outside the popup window we shut down the popup.
The problem is in toytoolkit, where we need to select the item if we
get a release within 500ms or if we get a second release. A second
release is the case where the first release came after 500ms and
didn't pop down the menu, and the second release event is from a click
on a menu item.
https://bugs.freedesktop.org/show_bug.cgi?id=52456
If clients don't set a cursor, they get whatever the last cursor was
before the pointer entered their window. That's a little confusing, so
set a pointer on enter to avoid that. The down-side is that simple EGL
isn't very simple anymore.
https://bugs.freedesktop.org/show_bug.cgi?id=52452
If we can find a boot_vga PCI GPU, we should prefer it over any other GPU
that is connected to the system. The boot_vga flag tells us that this GPU
is the primary system GPU.
This fixes problems on two-GPU-systems were the wrong GPU is used. It also
fixes systems were DisplayLink GPUs are available with lower IDs than PCI
GPUs (although, this seems unlikely).
Note that udev_enumerate guarantees that the entry-list is sorted. So for
systems that have platform-GPUs, these should almost always be reported
prior to hotpluggable (PCI, USB, ...) GPUs, as the kernel probes them
first.
https://bugs.freedesktop.org/show_bug.cgi?id=56237
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
By request on the wayland-devel mailing list, we could start collecting
useful writings here.
However, this is not meant to be a substitute to proper documentation,
though I understand it may very well become one. Better than nothing, I
guess, and hopefully helps in writing real documentation.
Feel free to add stuff.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This comment became stale in:
commit 65a11e1039
Author: Kristian Høgsberg <krh@bitplanet.net>
Date: Fri Aug 3 11:30:18 2012 -0400
compositor: Accumulate damage per plane
Now it is just misleading. Remove it.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Toytoolkit does not support setting opaqueness for anything else than
the immediate child widget of the frame widget. Backgrounds do not have
frames, so we need to poke it in manually.
This should allow Weston to paint the background without blending.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
If the bind fails, do not bother pretending the EGL Wayland extension
is usable, and no need to unbind, either.
Print some important details about the GLESv2 renderer configuration
into the log.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
When tiling window managers resize a non-resizable window they're violating
ICCCM. Not some hippie-community standard like EWMH, but ICCCM, which is
about as old and sacred as the constitution. If they want to force a window
to be a size it wasn't designed for, at least they could have the decency to
reparent the client window into a bigger containing window of whatever size
they think it should be. But apparently ICCCM compliance is too much to ask.
Anyway, all that just to say that it's really not our fault when we get an
enter event with coordinates outside the valid output region. But we'll
clip it anyway and work around mis-behaving tiling WMs.
Since the send-button-state request comes in on one socket and the
wayland event we're looking for comes in on another socket, the order
that we process the two in is undefined. Thus, button-test fails
intermittently, depending on which event we process first.
We change wl_display_flush() to wl_display_roundtrip(), to make sure that
we deal with all wayland events before handling test protocol requests.
Grabbed widgets should always receive motion events as if it was the
widget that would receive it if no grab was active. This means that the
focused widget should always be passed as the widget argument to widget
motion handlers.
This reverts commit 8c9c8fcf6e.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
The simple clients all just call wl_display_dispatch() in a while loop
without checking the return value. Now, if the server dies or other
error occurs, we get a -1 return value instead and need to break the loop.
Do not build the tablet-shell client if --disable-tablet-shell is given.
Change --enable-tablet-shell to --disable-tablet-shell in ./configure
--help output, since it is enabled by default. Add a description.
Use proper quoting in the conditional.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
since it doesn't use any of them. Fixes a build failure on systems,
where (E)GL headers are in non-standard path.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Separate simple EGL clients from other simple clients. This allows to
build either simple-shm or simple-egl, whichever you want. We avoid
linking libEGL and GLESv2 into simple-shm, and we can build simple-shm
even if nothing provides EGL, GLESv2, or wayland-egl APIs.
Change the options in configure --help from --enable to --disable, since
these are enabled by default, and you would normally only ever give the
--disable flavor. Add descriptions.
Remove the #define BUILD_SIMPLE_CLIENTS since it is not used.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
configure.ac: The toytoolkit clients used to get libEGL linked to them
even if there was no cairo-egl. This is useless, and actually harmful on
platforms, where libEGL absolutely requires one of the GL ES libraries
to be linked in, too.
Look for EGL-related packages only for cairo-egl with toytoolkit.
window.c: protect all GL header includes with HAVE_CAIRO_EGL, since that
is the only case we can support EGL, GL, or GLESv2 at all. In the case
we do not have cairo-egl, add enough definitions to let us build the
stubs for EGL-related functions.
Remove some #ifdefs that were inside of the same #ifdef already.
These changes allow to build sorfware rendering toytoolkit clients
without any bits of EGL libs or headers.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Ander Conselvan de Oliveira
Ran Benita
Kristian Høgsberg
Scott Moreau
David Herrmann
Damien Lespiau
Tiago Vignatti
Pekka Paalanen
Jonas Ådahl
John Kåre Alsaker