This uses the existing infrastructure for dealing with planar YUV buffers and only adds the
relevant yuv_format_descriptor to the table.
Reviewed-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Invert the Y_INVERT flag for the EGL import fo dmabufs. This fixes
weston-simple-dmabuf-intel to show the same image on both GL-composited
and with direct scanout on a hardware plane. Before, the image would
y-flip when switching between these two cases. Now the orientation also
matches the color values written in simple-dmabuf-intel.c.
The GL-renderer uses the OpenGL convention of texture coordinates, where
the origin is at the bottom-left of an image. This can be observed in
texture_region() where the texcoords are inverted if y_invert is false,
since the surface coordinates have origin at top-left. Both wl_shm and
dmabuf buffers have origin at the top-left.
When wl_shm buffer is imported with glTexImage2D, it gets inverted
because glTexImage2D is defined to read in the bottom row first. The shm
data is top row first. This incidentally also means, that buffer pixel
0,0 ends up at texture coordinates 0,0. This is now inverted compared to
the GL coordinate convention, and therefore gl_renderer_attach_shm()
sets y_inverted to true. This causes texture_region() to NOT invert the
texcoords. Wayland surface coordinates have origin at top-left, hence
the double-inversion.
Dmabuf buffers also have the origin at top-left. However, they are
imported via EGL to GL, where they should get the GL oriented
coordinates but they do not. It is as if pixel 0,0 ends up at texcoords
0,0 - the same thing as with wl_shm buffers. Therefore we need to invert
the invert flag.
Too bad EGL_EXT_image_dma_buf_import does not seem to specify the image
orientation. The GL spec implied result seems to conflict with the
reality in Mesa 11.2.2.
I asked about this in the Mesa developer mailing list. The question with
no answers:
https://lists.freedesktop.org/archives/mesa-dev/2016-June/120249.html
and the thread I hijacked to get some answers:
https://lists.freedesktop.org/archives/mesa-dev/2016-June/120733.html
which culminated to the conclusion:
https://lists.freedesktop.org/archives/mesa-dev/2016-June/120955.html
that supports this patch.
simple-dmabuf-v4l is equally fixed to not add Y_INVERT. There is no
rational reason to have it, and removing is necessary together with the
GL-renderer change to keep the image the right way up. This has been
tested with VIVID.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
libweston/gl-renderer.c: In function 'compress_bands':
libweston/gl-renderer.c:481:6: warning: 'merged' may be used
uninitialized in this function [-Wmaybe-uninitialized]
if (!merged) {
^
Warning produced by GCC 5.3 and 6.1, with -Og.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
When all outputs are gone, there are no current read/write
surfaces associated with a context. This makes the previously
created dummy surface current until an output gets attached
to avoid any potential crashes.
v2:
- Remove unnecessary objects
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
... prefixing it with a "weston_". This way we can reuse it across the
board, instead of the current strstr. The latter of which can give us
false positives, thus it will be resolved with next commit(s).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We provide a (workaround) definition in weston-egl-ext.h, thus we don't
need any guards.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
... and use it from simple-egl and gl-renderer.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Currently, the gl-renderer setup is being done on per-output
basis. This isn't desirable when trying to make weston run
with zero outputs.
When there are no outputs present, there is no surface available
to attach an EGLContext to with eglMakeCurrent, which makes
any EGL command fail.
The problem is solved by using EGL_KHR_surfaceless_context to
bind an EGLContext to EGL_NO_SURFACE, or if that is
unavailable, creating a dummy PbufferSurface and binding an
EGLContext to it, so EGL gets set up properly.
v2:
- Move PbufferSurface creation into its own function
- Introduce a new EGLConfig with EGL_PBUFFER_BIT set
and use it to create a PbufferSurface
- Make PbufferSurface attributes definition static
- Check for return of gl_renderer_setup and terminate
in case it fails
- Remove redundant gl_renderer_setup call from
gl_renderer_output_create
- Only destroy the dummy surface if it is valid
This patch causes a warning from Mesa when using the i965 driver:
libEGL warning: FIXME: egl/x11 doesn't support front buffer rendering.
A bug has been filed about it since it seems to be spurious:
https://bugs.freedesktop.org/show_bug.cgi?id=96694
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
[Pekka: filed a Mesa bug and added the note in commit msg]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This clarifies what is supposed to be the libweston code.
v2: screen-share.c is already in compositor/ instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]
Using strstr(3) for checking for extensions is an error-prone mechanism
as extension names can be prefixes of other extension names (see
https://www.opengl.org/registry/doc/rules.html#using).
This change implements the check_extension() function to properly check
for an extension and replaces all usages of strstr(3).
Signed-off-by: Miguel A Vico Moya <mvicomoya@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: move 'bool' to the same line with 'static']
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Namely the single-planar YUYV, the two-planar NV12, and the
three-planar YUV420, using the shaders already present in Weston.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Maniphest Tasks: T13
Differential Revision: https://phabricator.freedesktop.org/D334
This struct serves as renderer data for linux-dmabuf buffers, and can
contain multiple struct egl_image, simplifying this latter in the
common non-dmabuf case.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Differential Revision: https://phabricator.freedesktop.org/D333
This allows renderers to use that struct to create their own dmabufs,
in case they can’t import the one provided by the client directly but
know how to convert it into a format they can render.
Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Differential Revision: https://phabricator.freedesktop.org/D332
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Clean up display connection via eglTerminate() in case of EGL
initialisation error.
Signed-off-by: Dawid Gajownik <gajownik@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Import dmabuf as an EGLImage, and hold on to the EGLImage until we are
signalled a content change. On content change, destroy the EGLImage and
re-import to trigger GPU cache flushes.
We hold on to the EGLImage as long as possible just in case the client
does other imports that might later make re-importing fail.
As dmabuf protocol uses drm_fourcc codes, we need libdrm for
drm_fourcc.h. However, we are not doing any libdrm function calls, so
there is no new need to link to libdrm.
RFCv1 changes:
- fix error if dmabuf exposed unsupported
- always use GL_TEXTURE_EXTERNAL_OES with dmabuf
v2 changes:
- improve support check and error handling
- hold on to the imported EGLImage to avoid the dmabuf becoming
unimportable in the future
- send internal errors with linux_dmabuf_buffer_send_server_error()
- import EGL_EXT_image_dma_buf_import extension headers
- use heuristics to decide between GL_TEXTURE_2D and
GL_TEXTURE_EXTERNAL_OES
- add comment about Mesa requirements
- change y-invert from per-plane boolean to per-buffer flag
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is a reference-counted holder of an EGLImage. For now, direct
EGLImage usage is simply converted to use egl_image. Use of reference
counting will come in a later patch.
v2:
- this is a new patch, split from gl-renderer dmabuf import support
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Normally we need to check if a seat's [device_type]_count is > 0 before
we can use the associated pointer. However, in a binding you're
guaranteed that the seat has a device of that type. If we pass in
that type instead of the seat, it's obvious we don't have to test it.
The bindings can still get the seat pointer via whatever->seat if they
need it.
This is preparation for a follow up patch that prevents direct access
to seat->device_type pointers, and this will save us a few tests at
that point.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
EGLGetDisplay() doesn't generate a GL error, so we shouldn't print one.
I've also renamed the goto labels so it's a little clearer when to use them.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
To help reduce code duplication and also 'kitchen-sink' includes
the ARRAY_LENGTH macro was moved to a stand-alone file and
referenced from the sources consuming it. Other macros will be
added in subsequent passes.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
If the GL implementation doesn't provide an XRGB visual we may still be
able to proceed with an ARGB one. Since we're not changing the scanout
buffer format, and our current rendering loop always results in saturated
alpha in the frame buffer, it should be Just Fine(tm) - and probably better
than just exiting.
This is a workaround for https://bugs.freedesktop.org/show_bug.cgi?id=89689
Reviewed-By: Bryce Harrington <bryce@osg.samsung.com>
Tested-By: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Currently we pass either a single format or no formats to the gl renderer
create and output_create functions. We extend this to any number of
formats so we can allow fallback formats if we don't get our first pick.
Reviewed-By: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
EGL_MESA_configless_context is a display extension. The query for client
extensions was overwriting the pointer, so it was being searched from
the client extensions instead.
Fix any confusion here by moving all client extension checks into
another function. Drop a useless cast.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
An EGL implementation may support client extensions without supporting
EGL_EXT_platform_base. In such a case, we should return 0 to fall back
to the old eglGetDisplay() way.
Cc: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Some DRI drivers, including VMware vmwgfx, do not support
calling eglQueryString() with a EGL_NO_DISPLAY parameter.
Just as we do in gl_renderer_supports(), which returns 0
but does not fail in this case, do not fail in
gl_renderer_setup_egl_extensions().
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
[Pekka: split the patch]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This means compositors don't need to call supports() manually and
create() will just return -1 in the failure case as before. This also
means we can deal with the case of eglGetProcAddress returning
non-NULL but not actually being available at runtime.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Previously, weston_output.matrix was in GL coordinates and therefore only
really useful for the GL backend.
This breaks zoom, which will be fixed by the following patch:
zoom: Use pixels instead of GL coordinates
[Pekka: added a comment to compositor.h, message]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Taking the easy way, always do a rendering pass when copying any real
buffer or texture. Will handle YUV formats, and makes it easy to always
return data the right y-direction up.
All the FBO GL state is created and torn down on every invocation, so this
is a pretty naive implementation.
If there was a wl_shm buffer giving the content to the surface, and the
stride of the buffer was greater than width * bytes_per_pixel, then this
implementation will return stride long rows, not width.
Changes in v2:
- simplify pack_color()
- remove stride and format from the API
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add a new buffer type identifying the solid color contents which do not
have a real buffer.
Solid color surfaces now pretend to have 1x1 pixel content data.
This helps the future surface_get_data_size() implementation.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
weston_view::transform.boundingbox is made to include the layer mask,
which removes the need for masked_boundingbox.
The following were using boundingbox when they should have used
masked_boundingbox:
- drm_output_prepare_overlay_view() uses boundingbox to compute overlay
position, source and destination coordinates.
- drm_assign_planes() uses boundingbox for view overlap checks.
- is_view_not_visible() uses boundingbox, but nothing will show outside
the layer mask.
- weston_surface_assign_output() intersects boundingbox with output
region to choose the primary output for a surface.
- weston_view_assign_output() intersects boundingbox with output region
to pick the outputs the view is on.
This patch essentially changes all those cases to use the masked
boundingbox.
Therefore there are no cases which would need the boundingbox without
the layer mask, and we can convert boundingbox into masked and remove
the left-over member.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[v2: don't move the decl of 'mask' in weston_view_update_transform]
Reviewed-By: Giulio Camuffo <giuliocamuffo@gmail.com>
calloc (and zalloc) set the allocated memory to 0, so there's really no
need to do it manually.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
[Pekka: dropped the src/evdev.c hunk.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Pixman uses y-x banded rectangles to represent regions. We use these
y-x banded rectangles to generate triangle fans, resulting in more
geometry than strictly necessary to draw the screen.
This patch combines the bands to reduce geometry for complex scenes.
Acked-by: "Jasper St. Pierre" <jstpierre@mecheye.net>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
output_rotate_damage shifted an array of pixman regions with a loop. Now
it uses an index into that array.
This currently only saves 1 pixman_region32_copy, but we can now raise
BUFFER_DAMAGE_COUNT without a performance impact if we run into a
configuration where this is useful.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
this adds a mechanism to mask the views belonging to a layer
to an arbitrary rect, in the global space. The parts that don't fit
in that rect will be clipped away.
Supported by the gl and pixman renderer only for now.
If the client attaches a new SHM buffer with a different format from a
previous one then we ought to trigger a full upload so that GL can
allocate a new texture. Otherwise Weston would technically be doing
invalid operations because it would call glTexSubImage2D with a
different format from the one specified in glTexImage2D. Presumably it
would also mean GL would have to convert the buffer as it copies the
sub-region in which isn't ideal.
This patch makes it decide the GL format when the buffer is attached
instead of when processing the damage and it will set
needs_full_upload if it is different from what it used before.
Previously when uploading SHM data we would initialise the texture
with glTexImage2D and NULL data when the buffer is attached. Then if
the GL_EXT_unpack_subimage extension is available we would always use
glTexSubImage2D to upload the data. The problem with that is that the
first glTexImage2D was always setting the internal format to
GL_BGRA_EXT and then if a 16-bit texture is used we would later call
glTexSubImage2D with a data format of GL_RGBA. Under GLES2 the
internal format must always match the data format so this is
technically invalid.
This patch makes it so that it always calls glTexImage2D when flushing
the damage for the first time. That way it will use the right internal
format and we don't need to call glTexImage2D with NULL data.
https://bugs.freedesktop.org/show_bug.cgi?id=75251
Matthias Treydte
Pekka Paalanen
Quentin Glidic
Armin Krezović
Jussi Kukkonen
Emil Velikov
Miguel A. Vico
Bryce Harrington
Emmanuel Gil Peyrot
Derek Foreman
Jonas Ådahl
Dawid Gajownik
Louis-Francis Ratté-Boulianne
Jon Cruz
Manuel Bachmann
Jonny Lamb
Jason Ekstrand
Giulio Camuffo
Neil Roberts