Instead of just caching the fragment shaders and use some tables
cache all shaders and use a hash table.
Related: https://gitlab.freedesktop.org/virgl/virglrenderer/-/issues/125
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Corentin Noël <corentin.noel@collabora.com>.
MAYBE_UNUSED is replaced by ASSERTED. CLAMP in u_math.h is updated to
avoid a compile error.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Ryan Neph <ryanneph@google.com>
Acked-by: Gert Wollny <gert.wollny@collabora.com>
v2: cherry pick virglrenderer-specirfic e1e6d3cb ("Include sys/types.h
in p_compiler.h")
For texture arrays, the layer is stored at blit.{src,dst}.box.z.
In those cases, we need to go through the same path as we already do for
GL_TEXTURE_CUBE_MAP.
Fixes piglit's spec@ext_texture_array@copyteximage {1d_array,2d_array}.
Tested on both GLES and GL backends.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Since externally-stored BGRA resource buffers must remain with
BGRA byte ordering, there are several special cases in the custom
blitter that need to be handled, based on the source and destination
resource formats, as well as the views requested on each by the caller.
This change gives the caller more control over the swizzling operation
to perform during the shader-based blit, so the caller can reconcile the
special cases more concisely.
Fixes#225
Signed-off-by: Ryan Neph <ryanneph@google.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
BGRA emulation was added to address rendering artifacts when GL guest
apps are run on a GLES host with virglrenderer's use_gles == true.
Due to tenuous compatibility of EXT_texture_format_BGRA8888 with
gamma correction (sRGB formats/views) and multisampled rendering on
GLES hosts, it is best to represent BGR* resourcs with RGB* internal
format and add necessary byte re-ordering on to/from transfers instead.
Note, however, that removing the existing BGR* emulation will cause
problems for externally stored resources such as EGL images, and GBM
allocated buffers, which may actually be stored with BGR* byte-order.
This is addressed in the commits immediately following this one.
Signed-off-by: Ryan Neph <ryanneph@google.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
GL_TEXTURE_MIN/MAG_FILTER expects an enum value, to be set with
glTexParameteri() (integer value) instead of glTexParameterf() (float
value).
Closes#212
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
fs_texfetch_col_swizzle is parameterized on the number of samples and
whether or not it needs to handle swizzle. Make sure that the cached
shader is recreated if the parameters change.
Reviewed-by: Elie Tournier <elie.tournier@collabora.com>
convert_mag_filter is quite a simple function and it's only used once.
So lets inline it.
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
This patch move glDeleteShader into build_and_check to avoid code duplication
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
When switching context, if we want to use shared objects from previous
context, we need to insert glWaitSync to make sure the GL commands
are executed in sequences. This fixes 8 dEQP tests on mali:
dEQP-GLES2.functional.texture.mipmap.2d.generate.a8_fastest
dEQP-GLES2.functional.texture.mipmap.2d.generate.a8_nicest
dEQP-GLES2.functional.texture.mipmap.cube.generate.a8_fastest
dEQP-GLES2.functional.texture.mipmap.cube.generate.a8_nicest
dEQP-GLES2.functional.texture.specification.basic_copyteximage2d.2d_rgb
dEQP-GLES2.functional.texture.specification.basic_copyteximage2d.cube_rgb
dEQP-GLES2.functional.texture.specification.basic_copytexsubimage2d.2d_rgb
dEQP-GLES2.functional.texture.specification.basic_copytexsubimage2d.cube_rgb
Signed-off-by: Lepton Wu <lepton@chromium.org>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
For this introduce a NDEBUG_UNUSED macro
v2: Replace NDEBUG_UNUSED with MAYBE_UNUSED (Emil)
Silence unused warnings only if NDEBUG is defined
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
There are more instances where the sampler view and the texture are not
in the same context. So do more un-binding of textures after they were
used.
Related: #112
Signed-off-by: Gert Wollny's avatarGert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
If nr_samples is 1 we allocate textures as MULTISAMPLE, so we also need to handle
the textures in later use as a multisample texture. In addition, on GLES blits to
a multisample texture are not allowed as target, and we must use the GL blit
fallback for all texture types.
v2: Correct more checks including the one in check_resource_valid (Gurchetan)
v3: Also update the tests to use only 0 for no samples and >= 1 for samples
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
With vtest this swizzling is necessary, but with qemu it is not, so make
it a tweak.
v2: Use original blit format to check the format type in blitter
v3: Correct typo (Gurchetan)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Analogous to previous commit there's a single user that cares about it.
Let that one use amplertype_is_shadow() and drop the function argument.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The name for the internal texture properies flags VIRGL_BIND_NEED-SWIZZLE
and VIRGL_BIND_CAN_TEXTURE_STORAGE is misleading, and the latter flag was
even mis-using the binding member of the texture format structure.
Rename these flags to make it clear that these are not binding flags and
correctly use the 'flags' member for CAN_TEXTURE_STORAGE. In addition, drop
adding the NEED_SWIZZLE flag to the binding in the alpha texture emulation.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Multi-sample arrays are not part og GLSL 310 ES, so they need to
be explicitly enabled.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This is not supported and will issue a warning.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
These resources are emulated by using normal samplers.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
With that the srgb <-> linear handling can be simplified.
v2: Don't use texture views when TextureStorage can't be used to create
the texture, because then it is not immutable.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
On GL 4.4 (and GLES with EXT_sRGB_write_control) blits will decode and
encode sRGB when GL_FRAMEBUFFER_SRGB is supported, and they don't decode
when it isn't supported. Enabling or disabling this is signalled from
the guest by using the according surfaces.
In summary, there is no need to use the GL fallback for a blit decoding
sRGB, because this can also be handled in a normal blit.
Fixes piglits on a GL host:
blit texture srgb_to_linear downsample enabled render
blit renderbuffer srgb_to_linear msaa enabled render
blit renderbuffer srgb_to_linear msaa enabled clear
blit renderbuffer srgb_to_linear downsample enabled clear
v2: Fix typo in commit message (Erik)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This way all output originating from virglrenderer will be redirected.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: David Riley <davidriley@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is always passed as zero, so let's make the code a bit easier to
grok by removing this unused argument. We still need to pass zero to the
externally passed callback, though.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>