If a texture is bound in a GL context the texture object will not be
destroyed by the driver even if the program using the texture freed it.
At least with mesa Gallium drivers the effect that these texture objects
also hold references to sampler views that might have been created and
destroyed in sub-contexts. Now, when a new texture is allocated and
bound to the corresponding texture target, the old texture will finally
be destroyed at this point, and by doing so it will try to access these
already destroyed sampler views, resulting in a use after free.
Consequently, unbind the texture in context 0 after it has been allocated,
so that the driver doesn't hold an additional reference to it that inhibits
its destruction of the texture when the guest program requests this.
v2: Make sure that the texture is also unbound when the allocation function
bails out with an error (Chia-I Wu)
Closes#98
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
On one hand render_condition_enable might also be set when the
cond_render_gl_mode is empty, so no conditional rendering is
actually done and the copy path can be used. On the other hand,
on GLES rectangular textures are emulated, so the texture target
needs to be corrected, and for some reason different base formats
were required which doesn't make sense.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The GL fallback also must be used on GLES if the target surface is
a multi-sample surface or if the region blitted from a multi-sample
surface is not equal to the target region.
This patch results in piglit reporing regressions with
multisample-blit * depth
on a GLES host. However, these piglits make bits to MS surfaces which
is not supported by glBlitFramebuffer on GLES. The old code took that
path, and mesa would actually report an error when compiled with -DDEBUG
butthe piglits still reported success. Unfortunately, resolving the MS
propperly is quite a challange for depth textures, and requires information
that is not available in the blit info (zNear and zFar), so getting these
piglits to act correcly on GLES hosts seems quite impossible.
v2: Also use fallback on GLES if the source is multi-sample and the formats
of source and dest are not equal
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
With that the srgb <-> linear handling can be simplified.
v2: Don't use texture views when TextureStorage can't be used to create
the texture, because then it is not immutable.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
later we need this function in the blitter
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
v2: Don't use texture views if the texture of the format can't be
allocated by using TextureStorage, since then it is not immutable
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
On GL 4.4 (and GLES with EXT_sRGB_write_control) blits will decode and
encode sRGB when GL_FRAMEBUFFER_SRGB is supported, and they don't decode
when it isn't supported. Enabling or disabling this is signalled from
the guest by using the according surfaces.
In summary, there is no need to use the GL fallback for a blit decoding
sRGB, because this can also be handled in a normal blit.
Fixes piglits on a GL host:
blit texture srgb_to_linear downsample enabled render
blit renderbuffer srgb_to_linear msaa enabled render
blit renderbuffer srgb_to_linear msaa enabled clear
blit renderbuffer srgb_to_linear downsample enabled clear
v2: Fix typo in commit message (Erik)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The GL_EXT_color_buffer_float exptension spec defines that glReadPixels
can be done with the combination of GL_RGBA and GL_FLOAT, which matches
what OpenGL ES 3.2 allows. So let's enable the readback-format in this
case.
Thanks to Gert Wollny for pointing this out.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
On D-GL a program may contain a TE shader but no TC shader. On GLES either
both or none of TES and TCS need to be available. So if the guest sends a
shader program without a TCS, inject a passthrough shader using the
patch parameters given in the GL code.
Closes#84
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Given a source and destination image, consider the following sequence
of events:
1) glTexImage with src
2) virgl_resource_copy_region copies src to dst using GL
3) mesa attempts to readback dst, which returns the correct
result with vrend_transfer_send_getteximage only
Commands that reproduce this scenario on i965/qemu:
./bin/arb_copy_image-formats -auto
./bin/fbo-generatemipmap-formats GL_ARB_texture_float -auto
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Closes: #74
v2: * Enable enhanced layouts in the guest only when the host supports
it, because with indirect arrays enabled we re-emit the layout
the guest send.
* enable indirect arrays independently from the host capabilities
(following Eriks comments)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Gurchetan Singh <gurchetansingh@chromium.org>
Also check for GL_EXT_polygon_offset_clamp when deciding whether the
corresponding virgl feature is supported. This enables D3D11 in guest
Wine (and thus Steam/Proton), when running on GLES hosts that support
this extension.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This is useful for knowing if we can expose
KHR_texture_compression_astc_sliced_3d in the guest.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The piglits and KHR tests that use TF3 (i.e. multiple output
streams) tend to hang, and since the GLES host doesn't support
this but we lie about the GLSL version it is better to signal
the guest correctly that this is not supported.
v2: Set flag only on caps v2 code path, otherwise we might read
from uninitialized memory
v3: Increment feature check version to indicate that the TF3
feature flag is valid.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
In order to properly propagate the output masks to the inputs of the next
shader the shader slection has do be done in the order the shaders will be
called later.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
This is useful to avoid unsupported format-conversions on GLES.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This code-path is never going to work on GLES, so let's avoid trying.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This just removes some duplicate complexity, and adds a few asserts to
notice format-list mismatches earlier.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This adds the support for ARB_indirect_parameters extension
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The mesa state tracker can emulate this, but we should pass
it through properly to the host in case it has a more efficent path.
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When I added indirect draw support, I forgot to add support
for the binding flag for command args, we need this later,
but in order to introduce support without breaking things,
we should fix the bug first and add a separate cap for it.
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we add new feature checks on the host side that is used to enable
a cap conditionally in the guest that was enabled unconditionally before
we might end up with a feature regression when a new mesa version is
used with an old virglrenderer version that doesn't check for that cap.
To work around this problem add a version id to the caps that corresponds
to the features that are actually checked on the host so that it can be
checked in the guest whether this cap was actually checked for or whether
it should be enabled unconditionally.
The id should be incremented whenever a new feature check is added that
might result in a feature regression in the guest when run on an old host.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Pohsien Wang <pwang@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The shaders are issued backwards starting from the fragment
shader and, therefore, in the first pass when we fill out
the shader keys for the TES no TCS will be present.
So don't bail out in this case and assume there is a VS.
Later, when the VS shader is compiled it will check whether
a TES is present without a TCS and report the error.
Fixes: 956a6ceb8d
shader: Pass information about the layout of generics and patches to the next stage
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: <Gurchetan Singh gurchetansingh@chromium.org>
Softpipe doesn't support ARB_GLES3_1_compatibility but can support
NV_shader_atomic_float and this is needed for some dEQP-GLES31 tests to be
run on a softpipe GL host.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
(u|i)mulExtended are provided by ARB_gpu_shaders5 but also by
MESA_shader_integer_functions and only the latter is supported by softpipe
so fall back to this extension if needed.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This is needed for using the right extension in the shaders.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
On GLES GL_EXT_disjoint_timer_query provides this functionality, so we
should make use of it.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Makes things a tiny bit more consistent and easier to read.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
[airlied: rebased and fixed these up]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use explicit named initializers for the enum to string mappings.
Makes the code tiny bit easier to follow and grep through.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
[airlied: rebased these and fix up the fallout]
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes running Metro Redux 2033 on the GLES host.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes:
KHR-GL41.viewport_array.dynamic_viewport_index
KHR-GL41.viewport_array.draw_mulitple_viewports_with_single_invocation
when run in a batch as KHR-GL41.viewport_array.*
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With OES_viewport_array available the depth ranges can also be set
on GLES.
Fixes on GLES when run individually:
KHR-GL41.viewport_array.*
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Apart from fp64 about which we lie aynway the features required by
GLSL level 4.10 on top of 4.00 can be supported by GLES, so report
this higher feature level and it will give us GL 4.1 in the guest.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This enables indexed access to viewports on GLES hosts.
v2: Also add the extension to shaders when needed
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This helps a lot locating errors in the shaders.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Check args of the following function:
- vrend_decode_set_vertex_buffers
- vrend_decode_set_shader_buffers
- vrend_decode_set_atomic_buffers
- vrend_decode_set_shader_images
And change variable type to uint as the protocol should never send negative number.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Left shift int 1 by 31 bit is undefined behavior, which causes fuzzer
failure. Change 1 to 1u to avoid the runtime error.
Reviewed-by: Elie Tournier <elie.tournier@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There's little reason to confuse lod-bias and cubemap seamlessness. So
let's give lod-bias its own warning string.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
This flag is *always* passed as zero, so it carries no information.
Let's just get rid of it.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
This flag is *always* passed as zero, so it carries no information.
Let's just get rid of it.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
These already have to be the same as VIRGL_TRANSFER_{TO,FROM}_HOST, as
defined by the protocol. There's no point in having a separate set of
internal names for them.
While we're at it, rewrite tan if as a switch for clarity. This allows
us to detect internal usage of invalid values.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Virglrenderer sometimes tries to remove resources from the hash table
twice. Which will mess up the ressource hash table and reference counts
and therefore and leads to qemu/virglrenderer crashes.
Reproducer:
(a) guest creates resource foo, id 42.
(b) guest creates an object bar referencing resource foo.
(c) guest unreferences resource foo.
-> resource id 42 is removed from hash.
(d) guest creates a new resource baz, re-using id 42.
(e) guest destroys object bar.
-> resource foo refcount goes down to zero.
-> resource id 42 gets removed from hash the second time,
but id 42 entry points to resource baz not foo now.
Oops.
Note that most linux kernel drivers will never ever re-use resource ids
due to a bug in the virtio-gpu kms driver, in which case this bug
doesn't cause any harm.
Root cause is that vrend_renderer_resource_destroy() may call
vrend_resource_remove(), depending on the call chain. This is wrong.
Only vrend_renderer_resource_unref() which is called when the guest
unreferences a resource should remove the id from the hash table by
calling vrend_resource_remove().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: <Gurchetan Singh gurchetansingh@chromium.org>
mesa optimizes away the information about input layouts for generics and
patches for TCS, TES, and GEOM shaders (all that pass these inputs as
arrays), but when input arrays are allowed, then these varyings may
actually have overlapping layouts (at least some piglits do, even though
they don't specifically require ARB_enhanced_layouts).
To be able to link shaders like these with enables arrays pass this info
to the next stage.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Gurchetan Singh <gurchetansingh@chromium.org>
Arrays of arrays are way easier to handle and they are available on GLES
3.1, D-GL 4.3, and all hardware that is supported by mesa. The old code
path is still able to use blocks for passing parameters to and from
tesselation and geometry stages, but for the new code path they are
required.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Gurchetan Singh <gurchetansingh@chromium.org>
Set the pre stage correctly when the TCS shader is missing on OpenGL and
warn about it when on OpenGL ES.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Gert Wollny
Erik Faye-Lund
Gurchetan Singh
Alexandros Frantzis
Dave Airlie
Emil Velikov
Emil Velikov
Po-Hsien Wang
Gerd Hoffmann
Stéphane Marchesin
Elie Tournier