After the compositor exits the main loop in wl_display_run(), set the
compositor state to SLEEPING. This prevents scheduling repaints, that
will never be executed.
A repaint is scheduled by calling wl_event_loop_add_idle(), which
creates an idle event source. Normally the idle event source object is
destroyed after it has been executed. However, in the shutdown case we
never dispatch events again, and the object is leaked.
This leak is triggered by shell.c destructor, which destroys the
desktop-shell client. Destroying a client ends up calling
wlsc_compositor_schedule_repaint() while destroying the client
resources, especially surfaces.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
If the compositor is shutting down while the desktop_shell still exists,
we leaked some resources by not destroying the client record.
Call wl_client_destroy() on the desktop_shell client, if it exists
during shutdown. Fixes some Valgrind errors.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
wlsc_binding_destroy() was not being called at all. Fix the leaks by
introducing a function that destroys a whole list of bindings, instead
of individually saving an extra pointer to the binding object and
calling wlsc_binding_destroy() separately on each.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Some of the local pixman region objects were not being properly
destroyed before returning from the function. Destroy them, fixes
some Valgrind errors.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add a new wlsc_shell API function for destroying the shell plugin
object. Helps to reduce Valgrind reports.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
This is the other direction. The selection bridge will grab the X11
CLIPBOARD selection on behalf of the Wayland client when it sets the
Wayland selection. Right now only UTF-8 text is supported, but the
data types offered will be taken from the Wayland data source.
We need to store all touchpoint positions so that if we just get an
ABS_MT_POSITION_X or Y event, we can pull the other coordinate from the
cache. And we need this across invocations of evdev_input_device_data(),
so the accumulator approach doesn't work.
Instead, we go back to the approach of storing all this state in the
evdev device struct and we might as well just move the rel and abs state
there too.
This adds ABS_MT_* support for direct touch devices and notifies
the compositor. The compositor has a stub for now.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
fade_output() is strange in that it manufactures a wlsc_surface object
by hand, and then calls wlsc_surface_draw() on it.
Valgrind complained, that wlsc_surface_draw() accesses uninitialised
data: wlsc_surface::alpha. fade_output() forgets to set it.
Initialise surface.alpha in fade_output(). Specifically, set it to
compositor->current_alpha to deliberatly avoid the gluniform1f() call in
wlsc_surface_draw().
fade_output() binds a different GL shader program than
wlsc_surface_draw() expects. This program does not have a uniform called
"alpha", and the uniform location given in glUniform1f() is not for
this program anyway. A hint of that is the runtime error:
Mesa: User error: GL_INVALID_OPERATION in glUniform(type mismatch)
Fixing this seems to get rid of half a thousand of Valgrind errors, and
of course the Mesa user error.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Not sure why we get these, but it happens for Alt-click to move a window
(metacity binding) and messes up the idle inhibit counter.
FocusOut event as a result of ungrabbing doesn't really make sense and
fortunately we can safely ignore them.
Besides the new header file, there's also a change in the main evdev creation
procedure for a more suggestive name (evdev_input_add_devices ->
evdev_input_create). There's no real functional changes in this commit.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
I caught this when an evdev device fd was trying to trigger the main event
loop, which was already free'd and causing an invalid read.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Was causing an invalid read when the output is in fact destroyed. That's only
visible (segfault on my machine) on drm compositor because it's the only
backend trying to finish correct the compositor.
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Activate the toplevel, fullscrren and menu surfaces during mapping,
so that the launched applications can get the keyboard focus without
clicking on that window.
Move idle_time variable to struct wlsc_compositor, so that a shell
plugin can change it. Also store the original value from the command
line.
Add "duration" option to the desktop-shell screensaver config. This is
the time the screensaver will be visible, after idle timeout triggers
another time and blanks the screen.
Now you can have different delays to lock the screen, and switch off the
screen while a screensaver is running.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Read the same configuration file in the shell plugin (desktop-shell) as
the desktop-shell client does.
Add a new section "screensaver", where "path" defines the path of the
idle animation client to be executed. Not defining "path" disables the
animation.
Idle animations are not in use by default. It must be configured in
wayland-desktop-shell.ini or launched manually.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add WLSC_COMPOSITOR_IDLE state to the possible compositor internal
states, and fix the drm backend to restore the previous state instead of
forcing ACTIVE.
Normally, the compositor only uses the ACTIVE and SLEEPING states. The
IDLE state is another active state, reserved for the shell, when the
shell wants to have unlock() calls on activity, but the compositor cannot
be SLEEPING.
Use the IDLE state to fix exposing the unlock dialog while a screensaver
is animating. Without this fix, is it impossible to activate the unlock
dialog without waiting for a second idle timeout that really puts the
compositor into SLEEPING.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Reorder code in fade_frame() to that if shell->lock() calls
wlsc_compositor_wake(), the fade animation will run again.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Screensavers become visible the first time only after the compositor has
gone to sleep state. Therefore, to see screensaver in the start, wake up
the compositor. After a second idle timeout, the compositor will stay
sleeping.
We could also not apply this patch. It would mean the screensavers would
be visible only with the unlock dialog, and not become visible
automatically.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Implement the basics of screensaver surface management. Exec'ing and
killing the screensaver client is punted for later.
When a surface registered as a screensaver is mapped, it stays hidden
if the screen is not locked, or it is added to the compositor visible
surfaces list if the screen is locked.
The map() is restructured to set initial position first, and stacking
next. This allows SHELL_SURFACE_SCREENSAVER share positioning with
SHELL_SURFACE_FULLSCREEN, while show_screensaver() does its own
wlsc_surface_configure() call.
Also fix centering to the given fullscreen output, not the first output.
Another bug fix: previously configure() would call
wlsc_surface_configure() unconditionally, which assigns an output to
the surface. While the compositor is locked, if an application resizes
its window, we hit configure() and assign an output while the surface is
not in compositor->surface_list. This leads to invalid memory access on
the next call to wlsc_surface_damage_below(). Fix this by not calling
wlsc_surface_configure() for surfaces that are not visible.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
So far nothing prevented a client for registering a surface as one type
and then as another type. With some special types, this would lead to
corrupted wl_lists.
Add a function, that either resets the surface type or posts an error to
the client. In case of an error, the set type operation must be aborted.
Change the type name SHELL_SURFACE_NORMAL to SHELL_SURFACE_NONE, as
there is nothing normal in the "none" type which just means uninitialised.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Add the screensaver interface to the desktop-shell protocol file. Also
add stubs for it in the compositor, and make wscreensaver to bind to the
screensaver interface. Wscreensaver gets a new option --demo to retain
the current behaviour as a regular wayland client.
When a screensaver application starts, it should bind to the screensaver
interface, enumerate all outputs, create a surface per output, and
register those surfaces via screensaver::set_surface request. Then it
continues with the usual animation loop, waiting for frame events. The
compositor will decide, when the given screensaver surfaces are
displayed. A screensaver application should respond to outputs coming
and going away by creating and destroying surfaces.
The compositor is supposed to activate a screensaver by exec'ing it, and
stop the screensaver by killing the client process. Only one client may
be bound to the screensaver interface at a time. If there already is a
client, the compositor could either kill it first, or not exec a new
one.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Pekka Paalanen
Kristian Høgsberg
Tiago Vignatti
Juan Zhao